In the meantime I did some research. Wireshark told me that I'm using
speex. No Idea how it got there though (disabled on the priority list).
Now I disabled codecs in config_site.h:
/* Select codecs to disable */
#define PJMEDIA_HAS_L16_CODEC 0
#define PJMEDIA_HAS_ILBC_CODEC 0
#define PJMEDIA_HAS_G722_CODEC 0
#define PJMEDIA_HAS_G711_CODEC 0
#define PJMEDIA_HAS_GSM_CODEC 0
#define PJMEDIA_HAS_SPEEX_CODEC 0
#define PJMEDIA_HAS_INTEL_IPP 0
After the change I can't make a call with nokia X6. On an older N78 it
seems OK.
Error (nothing specific, app crashes):
Process 1575, thread 1576 stopped at 0x802c520f: Thread 0x628 has
panicked. Category: KERN-EXEC; Reason: 0
It happens somewhere inside "pjsua_conf_connect(CallDetails.conf_slot,
0) ;". Any ideas?
Tine Ur?i? wrote:
> Hi.
>
> Thanks for the response.
>
> I'm using VAS-Direct (in config_site.h: "#define
> PJ_CONFIG_NOKIA_VAS_DIRECT 1") . The codec should be ilbc - I disabled
> the other codecs and put ilbc on the top priority
> (pjsua_codec_set_priority), but I'm not completely sure it was
> correctly negotiated.
> How can I check for the codec being used during call?
>
> What exactly did you mean by "Try pjmedia_conf_get_port_info() for the
> destination port."? I did try to use pjsua_conf_get_port_info to get
> some more info on the stream:
>
> pjsua_conf_port_info PortInfo;
>
> status = pjsua_conf_get_port_info( pjsua_call_get_conf_port(CallID), &PortInfo );
> if (status != PJ_SUCCESS)
> {
> qDebug() << "Error while reading port info:" << status;
> }
>
> Debug output:
> PortInfo name: sip:xxxxxxx at xx.xx.xx.xx:5060;user=phone
> PortInfo clock rate: 16000
> PortInfo channel count: 1
> PortInfo samples per frame: 320
> PortInfo bits per sample: 16
> PortInfo listener cnt: 0
>
>
> Best regards,
> Tine
>
>
> Nanang Izzuddin wrote:
>> Hi,
>>
>> Try pjmedia_conf_get_port_info() for the destination port.
>>
>> Are you using VAS-Direct? And which codec was being used by the call stream?
>>
>> BR,
>> nanang
>>
>>
>> On Wed, Oct 13, 2010 at 2:11 PM, Tine Ur?i? <tine at cde.si> wrote:
>>
>>> Hi.
>>>
>>> I'm having a bit of trouble with playing a wave audio file to caller while
>>> "on hold".
>>>
>>> The error returned by pjsua_conf_connect is "220161" (Incompatible clock
>>> rate - PJMEDIA_ENCCLOCKRATE).
>>> The manual states: "WAV player port supports for reading WAV file with
>>> uncompressed 16 bit PCM format or compressed G.711 A-law/U-law format.".
>>> I've tried a lot of different wave formats (including 16bit 8khz standard)
>>> and I can't seem to find the right wave settings.
>>> If I connect player to the local speaker it works just fine (example:
>>> pjsua_conf_connect(pjsua_player_get_conf_port(player_id), 0); ).
>>>
>>> I'm using pjsip v1.6 on a symbian S60 device (VAS).
>>>
>>> How can I find which clock rate to use?
>>>
>>> Here's my sample code:
>>>
>>> pj_status_t status ;
>>> pjsua_call_info CallDetails ;
>>> pjsua_player_id player_id;
>>>
>>> if (pjsua_call_get_info(CallID, &CallDetails) == PJ_SUCCESS)
>>> {
>>> //disconnect caller
>>> pjsua_conf_disconnect(CallDetails.conf_slot, 0) ;
>>> pjsua_conf_disconnect(0, CallDetails.conf_slot) ;
>>>
>>> //create player
>>> pj_str_t awav = pj_str ("C:\\Data\\OnHold.wav");
>>> status = pjsua_player_create(&awav, 0, &player_id);
>>> if (status != PJ_SUCCESS)
>>> {
>>> status =
>>> pjsua_conf_connect(pjsua_player_get_conf_port(player_id),
>>> CallDetails.conf_slot);
>>> ...
>>> }
>>>
>>> }
>>>
>>>
>>>
>>> _______________________________________________
>>> Visit our blog: http://blog.pjsip.org
>>>
>>> pjsip mailing list
>>> pjsip at lists.pjsip.org
>>> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>>>
>>>
>>>
>>
>> _______________________________________________
>> Visit our blog: http://blog.pjsip.org
>>
>> pjsip mailing list
>> pjsip at lists.pjsip.org
>> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>>
>
>
> --
> Tine Ur?i?
> Razvojni in?enir
>
> CDE nove tehnologije d.o.o.
> Tehnolo?ki park 24
> 1000 Ljubljana, Slovenija
>
> GSM: +386 0 30 600 619
> E-mail: tine at cde.si
> www.cde.si
--
Tine Ur?i?
Razvojni in?enir
CDE nove tehnologije d.o.o.
Tehnolo?ki park 24
1000 Ljubljana, Slovenija
GSM: +386 0 30 600 619
E-mail: tine at cde.si
www.cde.si
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/attachments/20101014/a99345e5/attachment-0001.html>
