Hi Benny
Thank you for your answer.
I have added the defines in config_site.h, but it is still not working, as
it founds no WMME sound device.
The CODEC is not known by WinCE, and there is no sound device, and therefore
PJSIP fails when initializing, how to handle this?
In file wmmw_dev.c, it ends at the line:
PJ_LOG(4,(THIS_FILE, "WMME found no sound devices"));
//-------------------------------------------------------
/* API: init factory */
static pj_status_t factory_init(pjmedia_aud_dev_factory *f)
{
struct wmme_factory *wf = (struct wmme_factory*)f;
unsigned c;
int i;
int inputDeviceCount, outputDeviceCount, devCount=0;
pj_bool_t waveMapperAdded = PJ_FALSE;
/* Enumerate sound devices */
wf->dev_count = 0;
inputDeviceCount = waveInGetNumDevs();
devCount += inputDeviceCount;
outputDeviceCount = waveOutGetNumDevs();
devCount += outputDeviceCount;
if (devCount) {
/* Assume there is WAVE_MAPPER */
devCount += 2;
}
if (devCount==0) {
PJ_LOG(4,(THIS_FILE, "WMME found no sound devices"));
return PJMEDIA_EAUD_NODEV;
}
//---------------------------------
And it returns to endpoint.c :
/* Sound */
status = pjmedia_aud_subsys_init(pf);
if (status != PJ_SUCCESS)
goto on_error;
where it goes to error
//----------------------------------------------------
The output log looks like this:
Load module: BSSIPClient.exe
Load module: lpcrt.dll
Load module: ws2.dll
Load module: rpcrt4.dll
Load module: oleaut32.dll
Load module: ole32.dll
Load module: fpcrt.dll
Load module: commctrl.dll
Load module: coredll.dll
BSVoice startedBSSIPClient --> Ip addr:192.168.0.17, port: 50012
Load module: ssllsp.dll
Load module: wspm.dll
Load module: nspm.dll
Load module: iphlpapi.dll
BSSIPClient -> --> 01:44:15.912 sip_endpoint.c Module "mod-pjsua-log"
registered
BSSIPClient -> --> 01:44:16.077 sip_endpoint.c Module "mod-tsx-layer"
registered
BSSIPClient -> --> 01:44:16.328 sip_endpoint.c Module "mod-stateful-util"
registered
BSSIPClient -> --> 01:44:16.581 sip_endpoint.c Module "mod-ua" registered
BSSIPClient -> --> 01:44:16.775 sip_endpoint.c Module "mod-100rel"
registered
BSSIPClient -> --> 01:44:17.045 sip_endpoint.c Module "mod-pjsua"
registered
BSSIPClient -> --> 01:44:17.239 sip_endpoint.c Module "mod-invite"
registered
BSSIPClient -> --> 01:49:53.157 wmme_dev.c WMME found no sound
devices
//---------------------------------------------------------------
Best Regards
Kresten
-----Oprindelig meddelelse-----
Fra: pjsip-bounces at lists.pjsip.org
[mailto:pjsip-bounces at lists.pjsip.org]P? vegne af Benny Prijono
Sendt: 6. november 2009 09:40
Til: pjsip list
Emne: Re: [pjsip] CODEC
On Tue, Nov 3, 2009 at 7:17 PM, Kresten Tolstrup <kt at danphone.com> wrote:
> Hi,
>
> Isn't there anyone that kan help me with this problem? The short version
of
> the problem is that I need a passthrought CODEC, but when I use a
> passthrought CODEC, the other end don't get any CODEC information, in the
> SIP call.
>
Snippet of message trace would help here.
But actually, we do have a sample to use hardware codec on Windows!
The native WMME audio backend supports PCMA/PCMU codec, and here's
what I have in my config_site.h to enable it:
#define PJ_CONFIG_WIN32_WMME_DIRECT 1
#include <pj/config_site_sample.h>
#define PJMEDIA_HAS_L16_CODEC 0
#define PJMEDIA_HAS_G711_CODEC 0
#define PJMEDIA_HAS_GSM_CODEC 0
#define PJMEDIA_HAS_ILBC_CODEC 0
#define PJMEDIA_HAS_G722_CODEC 0
#define PJMEDIA_HAS_SPEEX_CODEC 0
#define PJMEDIA_HAS_G7221_CODEC 0
I just tested with latest pjsua and it seems to work.
Cheers
Benny
> Best Regards
> Kresten
>
> -----Oprindelig meddelelse-----
> Fra: pjsip-bounces at lists.pjsip.org
> [mailto:pjsip-bounces at lists.pjsip.org]P? vegne af Kresten Tolstrup
> Sendt: 30. oktober 2009 14:15
> Til: pjsip list
> Emne: Re: [pjsip] CODEC
>
>
> Hi Naning
>
> Thanks for your answer. I mean PCMA.
>
> I have read the link you gave me, but I have still problems.
>
> I have added #define PJMEDIA_CONF_USE_SWITCH_BOARD 1 in config_site.h and
> the passthrough codec for PCMA is also set to 1, but when I make a call to
> the PJSIP stack, I get the following error in the SIP SPD: "No suitable
> codec for remote offer (PJMEDIA_SPDNEG_NOANSCODEC)". It looks like the SIP
> stack don't have any passthrough codec, although #define
> PJMEDIA_HAS_PASSTHROUGH_CODEC_PCMA is set to 1. All codec defines are set
to
> zero.
>
> I have looked in the function pjsua_media_subsys_init, in file
> pjsua_media.c, under the define PJMEDIA_HAS_PASSTHROUGH_CODECS. When I run
> the code it finds no sound device, to me it looks like that could be the
> problem, because ext_fmt_cnt remains on zero, how to add a dummy sound
> device, I tried with null_sound_device, but it doesn't work.
>
> The samples shall be transmitted / received over a SSC bus, where the
codec
> is connected, so I have made my own PJSIP port, where the to functions
put-
> and getframe transmit and receive the data from and to the SSC bus, so I
> don't need any sounddevice.
>
> Does anyone know how to solve this problem?
>
> Best Regards
> Kresten
>
> -----Oprindelig meddelelse-----
> Fra: pjsip-bounces at lists.pjsip.org
> [mailto:pjsip-bounces at lists.pjsip.org]P? vegne af Nanang Izzuddin
> Sendt: 29. oktober 2009 17:52
> Til: pjsip list
> Emne: Re: [pjsip] CODEC
>
>
> Hi Kresten,
>
> Did you mean PCMU/u-law hardware codec?
>
> Please also note that enabling passthrough codecs will require audio
> switchboard as described in APS/VAS-direct wiki [1].
>
> Log snippet could be very useful.
>
> ---
> [1] http://trac.pjsip.org/repos/wiki/Nokia_APS_VAS_Direct
>
> BR,
> nanang
>
>
> On Thu, Oct 29, 2009 at 8:07 PM, Kresten Tolstrup <kt at danphone.com> wrote:
>> Hi,
>>
>> I have a a-low hardware codec together with a WinCE uP. Therefore I want
> to
>> use PJSIP with a passthrough CODEC. in the file config_site.h I have set
> the
>> following:
>>
>> #define PJMEDIA_HAS_PASSTHROUGH_CODECS ?1
>> #define PJMEDIA_HAS_L16_CODEC ? ? ? ? ? 0
>> #define PJMEDIA_HAS_ILBC_CODEC ? ? ? ? ?0
>> #define PJMEDIA_HAS_GSM_CODEC ? ? ? ? ? 0
>> #define PJMEDIA_HAS_SPEEX_CODEC ? ? ? ? 0
>> #define PJMEDIA_HAS_G722_CODEC ? ? ? ? ?0
>> #define PJMEDIA_HAS_PASSTHROUGH_CODEC_G729 ?0
>> #define PJMEDIA_HAS_PASSTHROUGH_CODEC_ILBC ? ? ?0
>> #define PJMEDIA_HAS_PASSTHROUGH_CODEC_PCMA ? ? ?0
>>
>> When I make a call to SJphone, and PJMEDIA_HAS_PASSTHROUGH_CODECS is set
> to
>> 1, SJphone says that there is CODEC error, but when
>> PJMEDIA_HAS_PASSTHROUGH_CODECS is set to 0 the sip call go through.
>> How can I fix this?
>>
>> Best regards
>> Kresten
>>
>>
>> _______________________________________________
>> Visit our blog: http://blog.pjsip.org
>>
>> pjsip mailing list
>> pjsip at lists.pjsip.org
>> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>>
>
> _______________________________________________
> Visit our blog: http://blog.pjsip.org
>
> pjsip mailing list
> pjsip at lists.pjsip.org
> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>
>
> _______________________________________________
> Visit our blog: http://blog.pjsip.org
>
> pjsip mailing list
> pjsip at lists.pjsip.org
> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>
>
> _______________________________________________
> Visit our blog: http://blog.pjsip.org
>
> pjsip mailing list
> pjsip at lists.pjsip.org
> http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>
_______________________________________________
Visit our blog: http://blog.pjsip.org
pjsip mailing list
pjsip at lists.pjsip.org
http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
