Well, I have disabled the STUN and tried to connect.. I see nothing on my local proxy server! and the registration times out.. My settings were: #define SIP_DST_URI "sip:192.168.0.7:5061" // // Account // #define HAS_SIP_ACCOUNT 1 #define SIP_DOMAIN "192.168.1.6X" #define SIP_REALM "*" #define SIP_USER "muser" #define SIP_PASSWD "pwd" // // Outbound proxy for all accounts // #define SIP_PROXY "sip:192.168.1.1XX;lr"//NULL //#define SIP_PROXY "sip:192.168.0.2;lr" // // Configure nameserver if DNS SRV is to be used with both SIP // or STUN (for STUN see other settings below) // #define NAMESERVER NULL #define NAMESERVER NULL // // STUN server #if 0 // Use this to have the STUN server resolved normally # define STUN_DOMAIN NULL # define STUN_SERVER "stun.fwdnet.net" #elif 0 // Use this to have the STUN server resolved with DNS SRV # define STUN_DOMAIN "iptel.org" # define STUN_SERVER NULL #else // Use this to disable STUN # define STUN_DOMAIN NULL # define STUN_SERVER NULL #endif // // Use ICE? // #define USE_ICE 1 Thanks in advance. On Sun, May 4, 2008 at 7:59 PM, Ayman Farouk <aymanfm at gmail.com> wrote: > Dear All, > I am really impressed by the amazing support you're giving. I am pretty new > to the whole thing! I want to know how would I configure my application if I > want to use " Local IP Addresses ONLY" - cause from what I have seen pjsip > tends to use the global IP addresses? In other words, my configuration is > just a registrar/proxy sip server and clients in a local area network.. no > STUN nor DNS. What's the best way to configure such a thing? > I think just don't use STUN (and this is the default setting), and that will be all? Cheers Benny -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/attachments/20080505/b3caa940/attachment.html
