Unable to make call using symbian_ua

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Bharat,

Finally we could reproduce the KERN-EXEC 3 problem in the emulator.
The bug has been fixed and committed in to the trunk svn, please try.
Thanks for the report.

Regards,
nanang


On 19/03/2008, Bharat Yadav <bharat.yadav at axisconvergence.com> wrote:
> Hi Nanang this (aatached file)is wireshark's trace of symbian_ua in emulator
>  call to my sip server and also please remind if more should required
>
> Thanks
>  Regards
>  Bharat
>
>  -----Original Message-----
>  From: pjsip-bounces@xxxxxxxxxxxxxxx [mailto:pjsip-bounces at lists.pjsip.org]
>
> On Behalf Of Nanang Izzuddin
>  Sent: Wednesday, March 19, 2008 4:17 PM
>  To: pjsip list
>  Subject: Re: Unable to make call using symbian_ua
>
>  Hi Bharat,
>
>  I think you need to send more info (problem reproduction steps, SIP trace,
>  etc).
>  Can you send along the SIP trace?
>  Since the info you gave us is too general, the problem is not reproducible.
>
>  Regards,
>  nanang
>
>
>  On 19/03/2008, Bharat Yadav <bharat.yadav at axisconvergence.com> wrote:
>  > Hi Benny Please help me
>  >  Thanks
>  >
>  > Best Regards
>  >
>  > Bharat
>  >
>  >  -----Original Message-----
>  >  From: pjsip-bounces@xxxxxxxxxxxxxxx
>  [mailto:pjsip-bounces at lists.pjsip.org]
>  >
>  > On Behalf Of Bharat Yadav
>  >  Sent: Tuesday, March 18, 2008 2:30 PM
>  >  To: 'pjsip list'
>  >  Subject: Re: Unable to make call using symbian_ua
>  >
>  >
>  > Thanks again I am using GSM with latest svn revision 1873 when I call to
>  >  sip:1000 at 74.86.204.44, IVR starts and any time in time system throughs an
>  >  error "unsupported address family failed file os_symbian.h line 295
>  consol
>  >  closed" press any key
>  >  This error came when I ported to my nokia e51 I am using S60 3rd SDK FP1
>  >  internet connecting via Access Point. If I test it via emulator it shows
>  >  only KERN_EXEC-3 and 1 more problem when symbian_ua starts it shows sound
>  >  error what is that?
>  >  Thanks
>  >
>  > Best Regards
>  >
>  > Bharat
>  >
>  >
>  >  -----Original Message-----
>  >  From: pjsip-bounces@xxxxxxxxxxxxxxx
>  [mailto:pjsip-bounces at lists.pjsip.org]
>  >  On Behalf Of Benny Prijono
>  >
>  > Sent: Tuesday, March 18, 2008 1:37 PM
>  >  To: pjsip list
>  >  Subject: Re: Unable to make call using symbian_ua
>  >
>  >  Thanks Bharat. Do you know what codec was used?
>  >
>  >  Cheers,
>  >   -benny
>  >
>  >  On 3/18/08, Bharat Yadav <bharat.yadav at axisconvergence.com> wrote:
>  >  > Thanks Benny for quick reply this is my symbian_ua settings
>  >  >  //
>  >  >  // Destination URI (to make call, or to subscribe presence)
>  >  >  //
>  >  >  #define SIP_DST_URI     "sip:1000 at 74.86.204.44"
>  >  >
>  >  >  //
>  >  >  // Account
>  >  >  //
>  >  >  #define HAS_SIP_ACCOUNT 1       // 0 to disable registration
>  >  >  #define SIP_DOMAIN      "74.86.204.44"
>  >  >  #define SIP_USER        "XXX"
>  >  >  #define SIP_PASSWD      "XXX"
>  >  >
>  >  >  Please advise me
>  >  >  Thanks
>  >  >  Regards
>  >  >  Bharat
>  >  >
>  >  >
>  >  >
>  >  >  -----Original Message-----
>  >  >  From: pjsip-bounces@xxxxxxxxxxxxxxx
>  >  [mailto:pjsip-bounces at lists.pjsip.org]
>  >  >  On Behalf Of Benny Prijono
>  >  >  Sent: Tuesday, March 18, 2008 1:54 AM
>  >  >  To: pjsip list
>  >  >  Subject: Re: Unable to make call using symbian_ua
>  >  >
>  >  >  On 3/17/08, Bharat Yadav <bharat.yadav at axisconvergence.com> wrote:
>  >  >  > Hi all
>  >  >  >
>  >  >  > I am newbe in symbian development I am trying to get rid on
>  symbian_ua
>  >  >  using
>  >  >  > emulator after successful compile all  went fine phone registered
>  with
>  >  my
>  >  >  > sip server but when I made a call using "m" for
>  sip:1000 at 74.86.204.XXX"
>  >  >  and
>  >  >  > IVR start but within a while (2 to 5 seconds) emulator through an
>  >  >  exception
>  >  >  > error "KERN-EXEC-3"  and emulator hangs on that point. I am using
>  S60
>  >  3rd
>  >  >  MR
>  >  >  > with Carbide.C++ 1.2. please help me.
>  >  >
>  >  >  Can you give your settings in your application? That would help us
>  >  >  finding out where the problem is.
>  >  >
>  >  >  cheers,
>  >  >   -benny
>  >  >
>  >  >
>  >  >  > Best Regards
>  >  >  >
>  >  >  > Bharat Yadav
>  >  >
>  >  >
>  >  > _______________________________________________
>  >  >  Visit our blog: http://blog.pjsip.org
>  >  >
>  >  >  pjsip mailing list
>  >  >  pjsip at lists.pjsip.org
>  >  >  http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>  >  >
>  >  >
>  >  >
>  >  >
>  >  >  _______________________________________________
>  >  >  Visit our blog: http://blog.pjsip.org
>  >  >
>  >  >  pjsip mailing list
>  >  >  pjsip at lists.pjsip.org
>  >  >  http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>  >  >
>  >
>  >  _______________________________________________
>  >  Visit our blog: http://blog.pjsip.org
>  >
>  >  pjsip mailing list
>  >  pjsip at lists.pjsip.org
>  >  http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>  >
>  >
>  >
>  >
>  >  _______________________________________________
>  >  Visit our blog: http://blog.pjsip.org
>  >
>  >  pjsip mailing list
>  >  pjsip at lists.pjsip.org
>  >  http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>  >
>  >
>  >
>  >
>  >  _______________________________________________
>  >  Visit our blog: http://blog.pjsip.org
>  >
>  >  pjsip mailing list
>  >  pjsip at lists.pjsip.org
>  >  http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>  >
>
>  _______________________________________________
>  Visit our blog: http://blog.pjsip.org
>
>  pjsip mailing list
>  pjsip at lists.pjsip.org
>  http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>
>
> _______________________________________________
>  Visit our blog: http://blog.pjsip.org
>
>  pjsip mailing list
>  pjsip at lists.pjsip.org
>  http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
>
>
>



[Index of Archives]     [Asterisk Users]     [Asterisk App Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [Linux API]
  Powered by Linux