On 2/27/08, Velthoen, Arie <Arie.Velthoen at nec-philips.com> wrote: > > > Hi Benny, > > I had the following problem: > > My PJSUA-like application is based on release 0.8.0. > After it has cleared a call, the opposite involved SIP-phone kept on sending > RTP (due to some error condition elsewhere). > After answering the next call my application switches the RTP address > alternatingly between the old and new party: > > udpmedia Remote RTP address switched to 192.168.9.83:49226 > udpmedia Remote RTP address switched to 192.168.9.72:49204 > ... > > I found in the mail-archive that this can be solved in my case by: > supplying option PJMEDIA_UDP_NO_SRC_ADDR_CHECKING > for pjmedia_transport_udp_attach in pjsua_media.c > > This works for my application, although the old RTP stream is troubling > causing "jitter buffer reset". > > Now my question is: > Can the option PJMEDIA_UDP_NO_SRC_ADDR_CHECKING be made > available via config_site.h ? > > This way it is easier to include new developments to pjproject in my > application. > Hi Arie, frankly I don't know how to make the option configurable via config_site.h at pjmedia level. At best, we can probably have a flag in pjsua.h to specify default flag when creating media transport. Care to make patch? ;-) cheers, -benny > > Best regards, > > Arie Velthoen
