Hi Benny, When PJSUA starts it does not report NAT result. I try 'n' and it does not report even after hours. I use --stun-srv=stun.fwdnet.net:3478 but also tried with --stun-srv=stunserver.org when I use this stun test program http://sourceforge.net/project/showfiles.php?group_id=47735&package_id=10214 6 I get> Nat with Independend Mapping and Port Dependent Filter - VoIP will work with STUN Preserves port number Does not supports hairpin of media Public IP address: 41.242.133.222 < Thanks Lafras ----- Original Message ----- From: "Benny Prijono" <bennylp@xxxxxxxxx> To: "pjsip embedded/DSP SIP discussion" <pjsip at lists.pjsip.org> Sent: Thursday, October 18, 2007 9:40 AM Subject: Re: [pjsip] r1504 Nat detect > Lafras Henning wrote: > > Hi Benny, > > When I tried PJSUA 'n' command in r1499 I got "Dead network" error even > > though I could make and recieve calls. > > All results will be for connectivity towards STUN server of course, > so it may not be the same result if the peer call is on different IP > route than the STUN server (for example, when STUN server is on > public Internet and your call is with peer in the same LAN). > > > Now I try same in r1504 and I get nothing - no error, no success. > > It's working fine here (r1506). NAT detection is only performed when > STUN is enabled, and it will only print the result after 8 seconds > or so. > > You can trigger re-detection by pressing 'n' in pjsua menu. > > cheers, > -benny > > > > Platform MinGW Win2K > > > > > > Regards > > Lafras > > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org >
