Hello Lafras, Thanks. It is possible that you send me the code you used to initiate the splitcomb. Myabe i could fin dout how to use, but it would be very much faster if i had a reference example in source code. We're just starting tom use the PJSIP code, so we're not quite familiar with it yet. I hope you will help. Regards, B. van Klinken -----Original Message----- From: pjsip-bounces@xxxxxxxxxxxxxxx [mailto:pjsip-bounces at lists.pjsip.org]On Behalf Of Lafras Henning Sent: 07-09-21 12:42 To: pjsip embedded/DSP SIP discussion Subject: Re: Example "Simple PJSUA" without soundcard Hi this solution from Benny worked just great for us. Regards Lafras Frankly I've forgotten about pjmedia_conf_add_passive_port(). :D And I don't have source codes handy with me now so I can't check it out. But it's true that this function is not used by anything. So it may be true that the implementation is broken. More over, we now have splitcomb, which achieves the same thing in more general manner. So if you want passive ports (actually active probably is more correct, but anyway the term has been confusing), you can instantiate a splitcomb, and create a reverse channel on the splitcomb, which then you can add to the bridge using the usual pjmedia_conf_add_port(). Your thread then can feed frames to the splitcomb. -- Benny Prijono http://www.pjsip.org - original message - Subject: Question regarding passive ports. From: "Lafras Henning" <lafras@xxxxxxxxxx> Date: 11/09/2007 14:15 Question regarding passive ports. I basically want to create a number of ports(10 to 20) in the conference bridge who's audio will be fed and extracted from an external thread. I can't to find an example of the correct use of pjmedia_conf_add_passive_port(), so the following I have gathered from the code. In conference .c get_frame() comment as follows. /* Get frame from this port. * For port zero (sound port) and passive ports, get the frame from * the rx_buffer instead. */ if (conf_port->port == NULL) {..... So it is clear that passive functions don't have a media port, as in create_sound_port() calls create_pasv_port with port ==NULL, this Creates snd_buf buffers and keeps conf_port->port == NULL to work as above. However pjmedia_conf_add_passive_port() creates a port, then calls create_pasv_port which does not create snd_buf buffers and keeps the port as the one created. Function pjmedia_conf_add_passive_port() is not used anywhere and is inconsistent with the behaviour of sound port, thus seems as though it is not implemented correctly? Or can anyone give an example of how to use pjmedia_conf_add_passive_port() correctly? Many thanks and regards Lafras _______________________________________________ Visit our blog: http://blog.pjsip.org pjsip mailing list pjsip at lists.pjsip.org http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org _______________________________________________ Visit our blog: http://blog.pjsip.org pjsip mailing list pjsip at lists.pjsip.org http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org ----- Original Message ----- From: "B. van Klinken" <b.vklinken@xxxxxxxxx> To: "'pjsip embedded/DSP SIP discussion'" <pjsip at lists.pjsip.org> Sent: Friday, September 21, 2007 12:13 PM Subject: Re: Example "Simple PJSUA" without soundcard > Hello Benny, > > Thanks for your answer. > > What we like to have is use something like "Simple PJSUA", but we don't know > how we get the audio bytes in our own software routines. > > We now understand how to disable the soundcard, but the null device is > created. But we still then don't know how we interface with the speech data. > > Can you send us a small piece of source code what we should create to get > the databytes into and from our own source code. > > Regards, > B. van Klinken > > -----Original Message----- > From: pjsip-bounces at lists.pjsip.org > [mailto:pjsip-bounces at lists.pjsip.org]On Behalf Of Benny Prijono > Sent: 07-09-20 19:13 > To: pjsip embedded/DSP SIP discussion > Subject: Re: [pjsip] Example "Simple PJSUA" without soundcard > > > B. van Klinken wrote: > > Hello, > > > > We we're now looking into the pjsip stack and we want to run something > like > > "Simple PJSUA" on a dedicated computer without soundcard. > > > > The SIP audio should be exchanged between our existing telecom system and > > the your stack (audio packets). > > > > We tried to find some example for this, but could not find it. > > > > We had a look at "Simple PJSUA", but then we see no audiocard > initialisation > > at all (so we don't see where the SIP audio is connected to the audio > card. > > If sound device is not initialized by application, PJSUA-LIB will > open the default sound device in pjsua_start(). If you want to use > no device (that is null sound device in pjsua's term), then call > pjsua_set_null_snd_dev() before calling pjsua_start(). > > In pjsua, you can set pjsua to use no device with --null-audio option. > > HTH, > -benny > > > > We found examples regarding the PJMEDIA stack, but we don't see have to > use > > this in the "Simple PJSUA" example. > > > > So we would like to have a simple application where we can put our own > > speech packets into the stack and receive spechdata out of the stack. > > > > Is there something like this available or can someone tell us how. > > > > Regards, > > > > B. van Klinken > > Sr. Project Engineer > > Rohill Technologies B.V. > > Edisonstraat 12, 7903 AN Hoogeveen > > P.O. Box 373, 7900 AJ Hoogeveen > > The Netherlands > > Tel: +31 (0)528 263 355 > > Fax: +31 (0)528 271 844 > > http://www.rohill.com/ > > - > > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip at lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > _______________________________________________ Visit our blog: http://blog.pjsip.org pjsip mailing list pjsip at lists.pjsip.org http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
