Re: error instant client PHP configure script

[Angel Motta <angelmotta@xxxxxxxxx>]

Hi again
One Question i downloaded again the file zip and now I can run the configure without errors. =)

But when I run "make test" I receive this error

make test
+-----------------------------------------------------------+
|                       ! ERROR !                           |
| The test-suite requires that proc_open() is available.    |
| Please check if you disabled it in php.ini.               |
+-----------------------------------------------------------+

I the first time the I install php in this server, and I dont have the php.ini in the /usr/local/php/etc/
Is this normal? I think this is ok, I never will can, do this test because this condition.

Then "I did make install"

Please confirm this error, if is normal.

Thanks
--
Angel

2010/3/8 Angel Motta <angelmotta@xxxxxxxxx>

Ohhh Christopher
I think you have the reason. When I was trying to unzipping again I see this:
[root@zimbra instantclient]# unzip instantclient-basic-linux32-11.2.0.1.zip
Archive:  instantclient-basic-linux32-11.2.0.1.zip
  inflating: instantclient_11_2/adrci
  inflating: instantclient_11_2/BASIC_README
  inflating: instantclient_11_2/genezi
  inflating: instantclient_11_2/libclntsh.so.11.1   bad CRC 05bc2fea  (should be 1621b100)
  inflating: instantclient_11_2/libnnz11.so
  inflating: instantclient_11_2/libocci.so.11.1
  inflating: instantclient_11_2/libociei.so
  inflating: instantclient_11_2/libocijdbc11.so
  inflating: instantclient_11_2/ojdbc5.jar
  inflating: instantclient_11_2/ojdbc6.jar
  inflating: instantclient_11_2/xstreams.jar

I think the zip file is corrupted. I am downloading this file again.
I will post the results of this.

--
Angel

2010/3/8 Christopher Jones <christopher.jones@xxxxxxxxxx>

The error "/opt/instantclient/libclntsh.so: file not recognized: File
format not recognized" still makes me think there is an installation
issue.

Make the libclntsh symbolic link points to the right file. See
http://www.oracle.com/technology/pub/notes/technote_php_instant.html
And/or try unzipping the 32 bit package again

I just built PHP 5.2.13 on Oracle EL 5.4 using effectively the same
options as you.  It built OK.  My configure line was:

./configure --prefix=$HOME/phptmp --with-xmlrpc --with-apxs2=$HOME/apache22/bin/apxs  --with-gd=/usr/ --with-jpeg-dir=/usr --with-png-dir=/usr --with-freetype-dir=/usr --with-xpm-dir=/usr --with-zlib=/usr --with-oci8=instantclient,$HOME/instantclient_11_2 --with-pdo-oci=instantclient,$HOME/instantclient_11_2,11.2 --with-snmp=/usr/ --with-openssl-dir=/usr --with-iconv --with-curl=/usr --with-curlwrappers --with-libxml-dir=/usr --with-gettext=/usr --enable-sigchild --enable-libxml --enable-soap

Chris

Angel Motta wrote:
> Sorry for send twice.
> I forgot php version and apache
> php-5.2.8
> apache: httpd-2.2.12
>

> 2010/3/8 Angel Motta <angelmotta@xxxxxxxxx <mailto:angelmotta@xxxxxxxxx>>

>
>     Hi Christopher and Thanks for your assistance
>
>     I am using:
>     RHEL 5.3 - 32bit platform
>     instantclient-basic-linux32-11.2.0.1.zip
>     instantclient-sdk-linux32-11.2.0.1.zip
>
>     I want to install oci8 support with snmp. When I enable snmp-support
>     (that is my objective) in the configure I get this error:
>
>     ./configure --prefix=/usr/local/php --with-xmlrpc
>     --with-apxs2=/usr/local/apache2/bin/apxs
>     --with-config-file-path=/usr/local/php/etc --with-gd=/usr/
>     --with-jpeg-dir=/usr --with-png-dir=/usr --with-freetype-dir=/usr
>     --with-xpm-dir=/usr --with-zlib=/usr
>     --with-oci8=instantclient,/opt/instantclient
>     --with-pdo-oci=instantclient,/opt/instantclient,11.1
>     --with-snmp=/usr/ --with-openssl-dir=/usr
>     --with-iconv=/usr/local/lib --with-curl=/usr --with-curlwrappers
>     --with-libxml-dir=/usr --with-gettext=/usr --enable-sigchild
>     --enable-libxml --enable-soap
>
>     checking for SNMP support... yes
>     checking OpenSSL dir for SNMP... /usr
>     checking whether to enable UCD SNMP hack... yes
>     checking for snmp_parse_oid in -lnetsnmp... no
>     checking for init_snmp in -lnetsnmp... no
>     configure: error: SNMP sanity check failed. Please check config.log
>     for more information.
>
>     #> vi config.log
>     Start with some like:
>     configure:2165: error: '__CYGWIN32__' undeclared (first use in this
>     function)
>     configure:2194: error: '__MINGW32__' undeclared (first use in this
>     function)
>
>     End with some of this:
>
>     /opt/instantclient/libclntsh.so: file not recognized: File format
>     not recognized
>     2017 collect2: ld returned 1 exit status
>     2018 configure: failed program was:
>     2019 #line 88940 "configure"
>     2020 #include "confdefs.h"
>     2021 /* Override any gcc2 internal prototype to avoid an error.  */
>     2022 /* We use char because int might match the return type of a gcc2
>     2023     builtin and then its argument prototype would still apply.  */
>     2024 char init_snmp();
>
>
>     Thanks
>     --
>     Angel
>
>     2010/3/8 Christopher Jones <christopher.jones@xxxxxxxxxx

>     <mailto:christopher.jones@xxxxxxxxxx>>

>
>
>         What platform? What PHP version?
>         Are you doing something like using 32 bit instantclient on a 64
>         bit machine?
>
>         Chris
>
>
>         Angel Motta wrote:
>
>             Hi List
>             Is my first time that I write to this list.
>             I am having problems to compile php with oci support.
>
>             I run this:
>             ./configure --prefix=/usr/local/php --with-xmlrpc
>             --with-apxs2=/usr/local/apache2/bin/apxs
>             --with-config-file-path=/usr/local/php/etc --with-gd=/usr/
>             --with-jpeg-dir=/usr --with-png-dir=/usr
>             --with-freetype-dir=/usr --with-xpm-dir=/usr
>             --with-zlib=/usr
>             --with-oci8=instantclient,/opt/instantclient
>             --with-pdo-oci=instantclient,/opt/instantclient,11.1
>             --with-openssl-dir=/usr --with-iconv=/usr/local
>             --with-curl=/usr --with-curlwrappers --with-libxml-dir=/usr
>             --with-gettext=/usr --enable-sigchild --enable-libxml
>             --enable-soap
>
>             And I receive alert at finish of ./configure and I see the
>             debug.log with this at the end:
>             conftest.c: In function 'main':
>             conftest.c:3: warning: incompatible implicit declaration of
>             built-in function 'exit'
>             /opt/instantclient/libclntsh.so: file not recognized: File
>             format not recognized
>             collect2: ld returned 1 exit status
>
>
>             Thanks for your assistance
>             --
>             Angel
>
>
>         --
>         Email: christopher.jones@xxxxxxxxxx

>         <mailto:christopher.jones@xxxxxxxxxx>    Tel:  +1 650 506 8630

>         Blog:  http://blogs.oracle.com/opal/   Free PHP Book:
>         http://tinyurl.com/UGPOM
>
>
>
>
>     --
>     Atte
>     Angel Motta Paz
>
>
>
>
> --
> Atte
> Angel Motta Paz

--
Email: christopher.jones@xxxxxxxxxx    Tel:  +1 650 506 8630
Blog:  http://blogs.oracle.com/opal/   Free PHP Book: http://tinyurl.com/UGPOM

--
Atte
Angel Motta Paz

-- 
Atte
Angel Motta Paz