Re: image recording and display

[Randy Little <randyslittle@xxxxxxxxx>]

The roundshot also works the same way as other CCD's its just a linear array like a scanner or Scanning back camera.  So its dumping per scanline to the D/A once a full exposure has been captured.  then it steps forward and captures the next full exposure.

 
Randy S. Little
http://www.rslittle.com

http://www.imdb.com/name/nm2325729/

On Wed, Sep 26, 2012 at 9:45 AM, Randy Little <randyslittle@xxxxxxxxx> wrote:

No the red works just the same as standard digital capture cameras.

On Sep 26, 2012 5:58 AM, "Jan Faul" <jan@xxxxxxxxxxx> wrote:

This is similar to how the sensor in a Roundshot D3 works as well. Unfortunately, Werner Seitz puts his $20,000 of opinions in there too, so you can’t just get the sensor. The Red sensors may work the same way.

Jan

On Sep 25, 2012, at 10:45 PM, James Schenken wrote:

No, the image gets constructed by an image sensor that appears to have 1 mm pixels.  At least that seems to be the resolution.  The sensor is a large flat plate.

James

Sent from David's iPad

On Sep 25, 2012, at 10:13 PM, Randy Little <randyslittle@xxxxxxxxx> wrote:

Isn't that more depth and time slicing of whole exposures like an MRI?

Randy S. Little

http://www.imdb.com/name/nm2325729/

On Tue, Sep 25, 2012 at 7:01 PM, James Schenken <jds@xxxxxxxxxxxxxxx> wrote:

Andy

Curious you should ask.  That is exactly how a nuclear scanner for medical scanning works.
It's interesting to watch the development of he image of one's innards on the display.

I just had such a scan and was able to watch the process unfold.

Cheers,
James

Sent from David's iPad

On Sep 25, 2012, at 9:36 PM, Andrew Davidhazy <andpph@xxxxxxx> wrote:

> Anyone know of a camera that displays what it records cumulatively? By this I mean that the recording process would be tied to the display in real time and one could "see" the decrease in density on the display as it goes from total underexposure and gradually build up to some leve of exposure which is then terminated either by the camera or by the photographer.
>
> So one would not choose for example and exposure time but would watch the display and when it showed a sufficient amount of detail/information etc. one then would stop further accumulation of "signal".
>
> I am not sure where this would have an application but I guess there would be some somewhere. Can anyone? Is this feasible?
>
> Just blue skying ...
>
> Andy from Rochester

Art Faul

The Artist Formerly Known as Prints

------

Stills That Move: http://www.artfaul.com

Greens: http://www.inkjetprince.com

Camera Works - The Washington Post

http://www.washingtonpost.com/wp-srv/photo/battlefieldparks/front_qt.htm

ArtNet: http://www.artnet.com/artists/jan+w.-faul/

http://www.artiqueunderground.com/artist/69.