Just a PS--If you don't get an answer, you might contact Metz directly
from their Website: http://www.metz.de/en/ (the English version for the
German-impaired such as I am)
Cheers,
Rich
On Saturday, July 31, 2004, at 08:45 PM, Rich Mason wrote:
Hi Marilyn,
I have a 60 CT-1 (there are other models in the 60 series) and the
power pack is marked CT 1/2. I don't have a switch such as you
describe on the power pack. Inside with the actual battery pack is
there is a switch for going from "NC" (NiCad) to "dry" (dryfit
battery) or "Pb" (I don't know what that is).
I think the "1" and "0" you describe may be the power on and off
switch? I'm not sure of that because my on/off switch isn't labeled
at all.
Cheers,
Rich
On Saturday, July 31, 2004, at 05:15 PM, Marilyn wrote:
Hello,
For those of you who have, or have had a Metz Mecablitz 60 CT power
pack, I
have a question.
It has been a while since I've had to recharge it and I've forgotten
where
the switch on top of the unit needs to be set in order for it to
recharge.
There is a "1" on one side of the switch and a "0" on the other side.
Where should the switch be set when recharging? Thank you for your
help in
advance.
Marilyn
http://richmason.com
http://richmason.com
