On Sun, Jun 11, 2006 at 07:42:55PM +0200, Florian Weimer wrote: > We recently had a partially failed disk in a RAID-1 configuration > which did not perform a write operation as requested. Consequently, > the mirrored disks had different contents, and the file which > contained the block switched randomly between two copies, depending on > which disk had been read. (In theory, it is possible to read always > from both disks, but this is not what RAID-1 configurations normally > do.) Actually, every RAID1 I've ever used will read from both to try and balance out the load. > Anyway, how would be the chances for PostgreSQL to detect such a > corruption on a heap or index data file? It's typically hard to > detect this at the application level, so I don't expect wonders. I'm > just curious if using PostgreSQL would have helped to catch this > sooner. I know that WAL pages are (or at least were) CRC'd, because there was extensive discussion around 32 bit vs 64 bit CRCs. There is no such check for data pages, although PostgreSQL has other ways to detect errors. But in a nutshell, if you care about your data, buy hardware you can trust. -- Jim C. Nasby, Sr. Engineering Consultant jnasby@xxxxxxxxxxxxx Pervasive Software http://pervasive.com work: 512-231-6117 vcard: http://jim.nasby.net/pervasive.vcf cell: 512-569-9461
