Hello,
wal_sender_timeout did not help (from default 60s to 600s), but I haven't tested receiver timeout since it was sender complaining and receiver loops over (
recvfrom
with "Resource temporarily unavailable" result, so i thought it is waiting for master sender to provide some data), thanks for the tip.
Since the behavior is all the time deterministic - works as expected until sender reaches
429/69E9CC60 (
wal 000000010000042900000069
) and it stuck it seems to me, that the issue is somewhat related to content of this file.
Another consideration is, why restart_lsn (
flush_lsn / replay_lsn on master )
never goes through 426/AAE55A68. May be, it is due to lack of my knowledge, but I'd expect that within almost 11GB of wal data would be some committed changes and it is lot behind maximum sent_lsn reported by wal sender - I would expect reply_lsn to more/less follow sent_lsn but I have no clue what what is root cause (stuck sender at certain sent_lsn or logical replication bg worker not applying/reporting so keeping restart_lsn constant). That is why I've tried to find whatever suspicious using
pg_waldump in wal files corresponding to restart_lsn and sent_lsn.
Kind regards Ales
so 3. 11. 2018 v 17:02 odesílatel Jerry Sievers <gsievers19@xxxxxxxxxxx> napsal:
Aleš Zelený <zeleny.ales@xxxxxxxxx> writes:
> Hello,
>
> we are suing logical replication on 10.4 and it now hangs. After
> some timeout it is retarted again, replaying 18GB of data and then
> hangs (while 7GB of wals remains to be proceeded).
Timeout...
Have a look at the 2 setting wal sender/receiver timeout and you
probably need to raise the sender timeout value.
HTH
>
> The backlog of 18GB comes from a failed migration adding new table to
> replication while replication user was not granted to select the
> table. This was clear from log files and once resolved by adding
> select privilege, I thought that all will work as usual (same
> happened in test env. many times and adding missing grant for select
> was sufficient to get it working... these were issues on tests).
>
> RDBMS Version:
> PostgreSQL 10.4 (Ubuntu 10.4-2.pgdg16.04+1) on x86_64-pc-linux-gnu,
> compiled by gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609,
> 64-bit
>
> Publication (master) instance error message from log:
>
> 2018-11-02 18:34:14 UTC 7974 5bdc8d27.1f26 7 192.168.23.11(58884)
> master_prod repusr 0 5/0 sub_eur idle [00000]:LOG: terminating
> walsender process due to replication timeout
>
> Subscription instance log:
>
> 2018-11-02 18:34:14 UTC 8657 5bdc8d26.21d1 2 0 3/0
> [XX000]:ERROR: could not receive data from WAL stream: SSL
> connection has been closed unexpectedly
> 2018-11-02 18:34:14 UTC 24699 5b923b1c.607b 1209397 0
> [00000]:LOG: worker process: logical replication worker for
> subscription 37932 (PID 8657) exited with exit code 1
>
> While it seems to be a network issue, it is may be not - we have
> checked the network and even monitoring, all the time some packets
> were exchanged.
>
> We do have 3 subscriptions(thus repl. slots) for one publication, one
> subscriber instance is within same datacenter as master, remainig
> subscribers are remote.
>
>
>>> select * from pg_replication_slots
> +------------+----------+-----------+--------+-------------+-----------+--------+------------+------+--------------+--------------+---------------------+
> | slot_name | plugin | slot_type | datoid | database |
> temporary | active | active_pid | xmin | catalog_xmin | restart_lsn
> | confirmed_flush_lsn |
> +------------+----------+-----------+--------+-------------+-----------+--------+------------+------+--------------+--------------+---------------------+
> | sub_usd | pgoutput | logical | 16421 | master_prod |
> False | True | 16604 | | 5536488 | 426/AAE55A68
> | 426/AAE55A68 |
> | sub_cad | pgoutput | logical | 16421 | master_prod |
> False | True | 22875 | | 5536488 | 426/AAE55A68
> | 426/AAE55A68 |
> | sub_eur | pgoutput | logical | 16421 | master_prod |
> False | True | 16605 | | 5536488 | 426/AAE55A68
> | 426/AAE55A68 |
> +------------+----------+-----------+--------+-------------+-----------+--------+------------+------+--------------+--------------+---------------------+
>
>
> Once after the error occurs, wal senders are re/started and they
> reads wal files until they reach restart_lsn wal file:
>
>>> select pg_walfile_name('426/AAE55A68')
> +--------------------------+
> | pg_walfile_name |
> +--------------------------+
> | 0000000100000426000000AA |
> +--------------------------+
>
> # changing file names until they reach this one:
> root@master-db:/pgsql/pgcluster/10/master_prod# lsof -p 1560 -p 5758
> -p 5790| grep pg_wal
> postgres 1560 postgres 10r REG 259,3 16777216 115766007 /
> pgsql/pgcluster/10/master_prod/pg_wal/000000010000042900000069
> postgres 5758 postgres 10r REG 259,3 16777216 115766007 /
> pgsql/pgcluster/10/master_prod/pg_wal/000000010000042900000069
> postgres 5790 postgres 10r REG 259,3 16777216 115766007 /
> pgsql/pgcluster/10/master_prod/pg_wal/000000010000042900000069
>
>
> At this moment sent_lsn stops growing and nothing is happening for a
> while.
>
> select * from pg_stat_replication;
>
> pid | usesysid | usename | application_name | client_addr |
> client_hostname | client_port | backend_start |
> backend_xmin | state | sent_lsn | write_lsn | flush_lsn |
> replay_lsn | write_lag | flush_lag | replay_lag | sync_priority |
> sync_state
> -------+----------+---------+--------------------+---------------+-----------------+-------------+-------------------------------+--------------+---------+--------------+--------------+--------------+--------------+-----------+-----------+------------+---------------+------------
> 16604 | 37868 | repusr | sub_usd | 192.168.21.11 |
> | 35010 | 2018-11-02 23:52:22.059157+00 |
> | catchup | 429/69E9CC60 | 426/AAE55A68 | 426/AAE55A68
> | 426/AAE55A68 | | | | 0 |
> async
> 16605 | 37868 | repusr | sub_eur | 192.168.23.11 |
> | 36388 | 2018-11-02 23:52:24.75038+00 |
> | catchup | 429/69E9CC60 | 426/AAE55A68 | 426/AAE55A68
> | 426/AAE55A68 | | | | 0 |
> async
> 12387 | 37868 | repusr | sub_cad | 192.168.22.11 |
> | 51982 | 2018-11-02 23:30:31.372404+00 |
> | catchup | 429/69E9CC60 | 426/AAE55A68 | 426/AAE55A68
> | 426/AAE55A68 | | | | 0 |
> async
> (3 rows)
>
> What I found being done behind the scenes while from
> pg_stat_replication "nothing is happening":
>
> On Master wal snaders strace look like:
>
> open("pg_replslot/sub_usd/xid-6040508-lsn-429-57000000.snap",
> O_WRONLY|O_CREAT|O_APPEND, 0600) = 15
> write(15, "\334\0\0\0\0\0\0\0H\3\234W)\4\0\0\0\0\0\0\0\0\0\0\177\6\0\
> 0%@\0\0"..., 220) = 220
> close(15) = 0
>
> On subscription instance, strice for wal reciever looks like this:
> recvfrom(7, 0x55f56a3783c3, 5, 0, NULL, NULL) = -1 EAGAIN (Resource
> temporarily unavailable)
> epoll_create1(EPOLL_CLOEXEC) = 10
> epoll_ctl(10, EPOLL_CTL_ADD, 12, {EPOLLIN|EPOLLERR|EPOLLHUP, {u32=
> 1781282352, u64=94512536630832}}) = 0
> epoll_ctl(10, EPOLL_CTL_ADD, 9, {EPOLLIN|EPOLLERR|EPOLLHUP, {u32=
> 1781282376, u64=94512536630856}}) = 0
> epoll_ctl(10, EPOLL_CTL_ADD, 7, {EPOLLIN|EPOLLERR|EPOLLHUP, {u32=
> 1781282400, u64=94512536630880}}) = 0
> epoll_wait(10, [], 1, 1000) = 0
>
> tcpdump:
> 21:33:16.811590 IP (tos 0x0, ttl 64, id 24478, offset 0, flags [DF],
> proto TCP (6), length 52)
> 192.168.20.11.5432 > 192.168.21.11.34744: Flags [.], cksum 0xe2ab
> (correct), ack 1360, win 235, options [nop,nop,TS val 3699603 ecr
> 2060668460], length 0
> 21:33:26.821860 IP (tos 0x0, ttl 64, id 64522, offset 0, flags [DF],
> proto TCP (6), length 120)
> 192.168.21.11.34744 > 192.168.20.11.5432: Flags [P.], cksum
> 0x3ecf (incorrect -> 0xbaf0), seq 1360:1428, ack 1, win 265, options
> [nop,nop,TS val 2060670963 ecr 3699603], length 68
> 21:33:26.822156 IP (tos 0x0, ttl 64, id 24479, offset 0, flags [DF],
> proto TCP (6), length 52)
> 192.168.20.11.5432 > 192.168.21.11.34744: Flags [.], cksum 0xceda
> (correct), ack 1428, win 235, options [nop,nop,TS val 3702105 ecr
> 2060670963], length 0
> 21:33:36.832445 IP (tos 0x0, ttl 64, id 64523, offset 0, flags [DF],
> proto TCP (6), length 120)
> 192.168.21.11.34744 > 192.168.20.11.5432: Flags [P.], cksum
> 0x3ecf (incorrect -> 0x3881), seq 1428:1496, ack 1, win 265, options
> [nop,nop,TS val 2060673465 ecr 3702105], length 68
> 21:33:36.832752 IP (tos 0x0, ttl 64, id 24480, offset 0, flags [DF],
> proto TCP (6), length 52)
> 192.168.20.11.5432 > 192.168.21.11.34744: Flags [.], cksum 0xbb09
> (correct), ack 1496, win 235, options [nop,nop,TS val 3704608 ecr
> 2060673465], length 0
> 21:33:46.843063 IP (tos 0x0, ttl 64, id 64524, offset 0, flags [DF],
> proto TCP (6), length 120)
> 192.168.21.11.34744 > 192.168.20.11.5432: Flags [P.], cksum
> 0x3ecf (incorrect -> 0xcf34), seq 1496:1564, ack 1, win 265, options
> [nop,nop,TS val 2060675968 ecr 3704608], length 68
> 21:33:46.843362 IP (tos 0x0, ttl 64, id 24481, offset 0, flags [DF],
> proto TCP (6), length 52)
> 192.168.20.11.5432 > 192.168.21.11.34744: Flags [.], cksum 0xa737
> (correct), ack 1564, win 235, options [nop,nop,TS val 3707111 ecr
> 2060675968], length 0
>
> Some checksum issues, but finally ack-ed. Tried to open psql session
> from host running subscription instance to master instance and it
> worked like a charm.
>
>
> I've tried pg_waldump, but nothing what I'll be able to consider as
> error...
>>> select pg_walfile_name('426/AAE55A68')
> +--------------------------+
> | pg_walfile_name |
> +--------------------------+
> | 0000000100000426000000AA |
> +--------------------------+
> /usr/lib/postgresql/10/bin/pg_waldump -s 426/AAE55A68
> 0000000100000426000000AA | less
>
> rmgr: Standby len (rec/tot): 50/ 50, tx: 0, lsn:
> 426/AAE55A68, prev 426/AAE559C0, desc: RUNNING_XACTS nextXid 5536488
> latestCompletedXid 5536487 oldestRunningXid 5536488
> rmgr: Standby len (rec/tot): 50/ 50, tx: 0, lsn:
> 426/AAE55AA0, prev 426/AAE55A68, desc: RUNNING_XACTS nextXid 5536488
> latestCompletedXid 5536487 oldestRunningXid 5536488
> rmgr: Standby len (rec/tot): 50/ 50, tx: 0, lsn:
> 426/AAE55AD8, prev 426/AAE55AA0, desc: RUNNING_XACTS nextXid 5536488
> latestCompletedXid 5536487 oldestRunningXid 5536488
> rmgr: Standby len (rec/tot): 50/ 50, tx: 0, lsn:
> 426/AAE55B10, prev 426/AAE55AD8, desc: RUNNING_XACTS nextXid 5536488
> latestCompletedXid 5536487 oldestRunningXid 5536488
> rmgr: Standby len (rec/tot): 50/ 50, tx: 0, lsn:
> 426/AAE55B48, prev 426/AAE55B10, desc: RUNNING_XACTS nextXid 5536488
> latestCompletedXid 5536487 oldestRunningXid 5536488
> rmgr: Standby len (rec/tot): 50/ 50, tx: 0, lsn:
> 426/AAE55B80, prev 426/AAE55B48, desc: RUNNING_XACTS nextXid 5536488
> latestCompletedXid 5536487 oldestRunningXid 5536488
> rmgr: XLOG len (rec/tot): 24/ 24, tx: 0, lsn:
> 426/AAE55BB8, prev 426/AAE55B80, desc: SWITCH
>
>
> I've also did the same for sent_lsn:
>>> select pg_walfile_name('429/69E9CC60');
> +--------------------------+
> | pg_walfile_name |
> +--------------------------+
> | 000000010000042900000069 |
> +--------------------------+
>
> /usr/lib/postgresql/10/bin/pg_waldump -s 429/69E9CC60
> 000000010000042900000069 | less
> rmgr: Heap len (rec/tot): 76/ 76, tx: 5536495, lsn:
> 429/69E9CC60, prev 429/69E9CC10, desc: DELETE off 81 KEYS_UPDATED ,
> blkref #0: rel 1663/16421/38572 blk 40
> rmgr: Heap len (rec/tot): 76/ 76, tx: 5536495, lsn:
> 429/69E9CCB0, prev 429/69E9CC60, desc: DELETE off 82 KEYS_UPDATED ,
> blkref #0: rel 1663/16421/38572 blk 40
> rmgr: Heap len (rec/tot): 76/ 76, tx: 5536495, lsn:
> 429/69E9CD00, prev 429/69E9CCB0, desc: DELETE off 83 KEYS_UPDATED ,
> blkref #0: rel 1663/16421/38572 blk 40
>
> The relation 38572 from list above is an ordinary non replicated
> table.
>
> Any help or advice how to diagnose/get it working is highly
> appreciated.
>
> Kind regards Ales Zeleny
>
>
--
Jerry Sievers
Postgres DBA/Development Consulting
e: postgres.consulting@xxxxxxxxxxx
p: 312.241.7800
