On 4/2/13, John R Pierce <pierce@xxxxxxxxxxxx> wrote: > On 4/2/2013 3:35 PM, David Noel wrote: >> The hardware is a Dell PowerEdge 1420, dual Xeon Nocona's, 3.2ghz, >> 16gb ram. The disks are 4 Kingston HyperX SATA3's attached to a >> HighPoint RocketRAID 2721 controller, ZFS, RAID10. > ..... >> postgresql.conf, all standard/default except for: >> max_connections = 256 > > A) use a connection pool so you don't NEED 256 active database connections. > > B) shared_buffers, work_mem, and maintenance_work_mem all need to be > tuned. I'd suggest 4gb, 16mb, 1gb respectively as a starting point on > a 16GB ram system. if you can, shrink your max_connections by using a > connection pooler (my target is generally no more than 2-4 active > queries per CPU core or hardware thread). Great, thanks. I'll get those tunables modified and see if that smooths things out. > Ouch, Xeon Nocona was a > single core, dual thread CPU, with rather poor performance, essentially > just a Pentium-4... 3Ghz on a P4 is like 2Ghz on other CPUs. I won't tell them you said that. Feelings might get hurt. > when you said raid10, do you mean zfs mirrored, or are you doing > hardware raid10 in the Highpoint? I would have configured the raid > card for JBOD, and done ZFS mirroring in the OS, so you can take > advantage of ZFS's data integrity features. RAID10 under ZFS. Yes, JBOD. ZFS is neat! > Those are consumer grade SSD's, are they even qualified for use > with that Highpoint controller? Consumer grade SSD's, indeed. They've held together so far though. Fingers crossed. Thanks again, -David -- Sent via pgsql-general mailing list (pgsql-general@xxxxxxxxxxxxxx) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-general
