Re: New server setup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 21/03/13 13:44, David Rees wrote:
On Thu, Mar 14, 2013 at 4:37 PM, David Boreham <david_list@xxxxxxxxxxx> wrote:
You might want to evaluate the performance you can achieve with a single-SSD
(use several for capacity by all means) before considering a RAID card + SSD
solution.
Again I bet it depends on the application but our experience with the older
Intel 710 series is that their performance out-runs the CPU, at least under
our PG workload.

How many people are using a single enterprise grade SSD for production
without RAID? I've had a few consumer grade SSDs brick themselves -
but are the enterprise grade SSDs, like the new Intel S3700 which you
can get in sizes up to 800GB, reliable enough to run as a single drive
without RAID1? The performance of one is definitely good enough for
most medium sized workloads without the complexity of a BBU RAID and
multiple spinning disks...


If you are using Intel S3700 or 710's you can certainly use a pair setup in software RAID1 (so avoiding the need for RAID cards and BBU etc).

I'd certainly feel happier with 2 drives :-) . However, a setup using replication with a number of hosts - each with a single SSD is going to be ok.

Regards

Mark



--
Sent via pgsql-performance mailing list (pgsql-performance@xxxxxxxxxxxxxx)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-performance


[Postgresql General]     [Postgresql PHP]     [PHP Users]     [PHP Home]     [PHP on Windows]     [Kernel Newbies]     [PHP Classes]     [PHP Books]     [PHP Databases]     [Yosemite]

  Powered by Linux