Anandtech took the trouble of doing that:
http://www.anandtech.com/show/4902/intel-ssd-710-200gb-review
I think the main advantage of the 710 compared to the 320 is its much
heavier over-provisioning and better quality MLC-chips. Both the 320 and
710 use the same controller and offer similar performance. But 320GB of
raw capacity is sold as a 300GB Intel 320 and as a 200GB Intel 710...
So if you don't need write-endurance, you can probably assume the 320
will be more capacity and bang for the buck and will be good enough. If
you're a worried about write-endurance, you should have a look at the
710. You can obviously also only provision about 200GB of that 300GB
320-ssd and thus increase its expected live span, but you'd still miss
the higher quality MLC. Given the fact that you can get two 320's for
the price of one 710, its probably always a bit difficult to actually
make the choice (unless you want a fixed amount of disks and the best
endurance possible for that).
Best regards,
Arjen
On 2-10-2011 5:22 Andy wrote:
Do you have an Intel 320? I'd love to see tests comparing 710 to 320 and
see if it's worth the price premium.
------------------------------------------------------------------------
*From:* David Boreham <david_list@xxxxxxxxxxx>
*To:* PGSQL Performance <pgsql-performance@xxxxxxxxxxxxxx>
*Sent:* Saturday, October 1, 2011 10:39 PM
*Subject:* Suggestions for Intel 710 SSD test
I have a 710 (Lyndonville) SSD in a test server. Ultimately we'll run
capacity tests using our application (which in turn uses PG), but it'll
take a while to get those set up. In the meantime, I'd be happy to
entertain running whatever tests folks here would like to suggest,
spare time-permitting.
I've already tried bonnie++, sysbench and a simple WAL emulation
test program I wrote more than 10 years ago. The drive tests at
around 160Mbyte/s on bulk data and 4k tps for commit rate writing
small blocks.
-- Sent via pgsql-performance mailing list
(pgsql-performance@xxxxxxxxxxxxxx <mailto:pgsql-performance@xxxxxxxxxxxxxx>)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-performance
--
Sent via pgsql-performance mailing list (pgsql-performance@xxxxxxxxxxxxxx)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-performance
