On Thu, Jul 8, 2010 at 12:13 PM, Jochen Erwied <jochen@xxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
Thursday, July 8, 2010, 7:16:47 PM you wrote:If you have root access to the machine, you should try 'tw_cli /cx show',
> Thanks. The server is hosted, so it is a bit of a hassle to figure this
> stuff out, but I am having someone check.
where the x in /cx is the controller number. If not present on the machine,
the command-line-tools are available from 3ware in their download-section.
You should get an output showing something like this:
Name OnlineState BBUReady Status Volt Temp Hours LastCapTest
---------------------------------------------------------------------------
bbu On Yes OK OK OK 202 01-Jan-1970
Don't ask why the 'LastCapTest' does not show a valid value, the bbu here
completed the test successfully.
--
Jochen Erwied | home: jochen@xxxxxxxxx +49-208-38800-18, FAX: -19
Sauerbruchstr. 17 | work: joe@xxxxxxxxxxxxxxx +49-2151-7294-24, FAX: -50
D-45470 Muelheim | mobile: jochen.erwied@xxxxxxxxxxx +49-173-5404164
Here is what I got:
# ./tw_cli /c0 show
Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy
------------------------------------------------------------------------------
u0 RAID-10 OK - - 64K 465.641 OFF ON
Port Status Unit Size Blocks Serial
---------------------------------------------------------------
p0 OK u0 233.81 GB 490350672 WD-WCAT1F502612
p1 OK u0 233.81 GB 490350672 WD-WCAT1F472718
p2 OK u0 233.81 GB 490350672 WD-WCAT1F216268
p3 OK u0 233.81 GB 490350672 WD-WCAT1F216528
