Ron Mayer wrote:
Greg Smith wrote:
On Wed, 1 Apr 2009, Scott Carey wrote:
Write caching on SATA is totally fine. There were some old ATA drives
that when paried with some file systems or OS's would not be safe. There are
some combinations that have unsafe write barriers. But there is a
standard
well supported ATA command to sync and only return after the data is on
disk. If you are running an OS that is anything recent at all, and any
disks that are not really old, you're fine.
While I would like to believe this, I don't trust any claims in this
area that don't have matching tests that demonstrate things working as
expected. And I've never seen this work.
My laptop has a 7200 RPM drive, which means that if fsync is being
passed through to the disk correctly I can only fsync <120
times/second. Here's what I get when I run sysbench on it, starting
with the default ext3 configuration:
I believe it's ext3 who's cheating in this scenario.
I assume so too. Here the same test using XFS, first with barriers (XFS
default) and then without:
Linux 2.6.28-gentoo-r2 #1 SMP Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz
GenuineIntel GNU/Linux
/dev/sdb /data2 xfs rw,noatime,attr2,logbufs=8,logbsize=256k,noquota 0 0
# sysbench --test=fileio --file-fsync-freq=1 --file-num=1
--file-total-size=16384 --file-test-mode=rndwr run
sysbench 0.4.10: multi-threaded system evaluation benchmark
Running the test with following options:
Number of threads: 1
Extra file open flags: 0
1 files, 16Kb each
16Kb total file size
Block size 16Kb
Number of random requests for random IO: 10000
Read/Write ratio for combined random IO test: 1.50
Periodic FSYNC enabled, calling fsync() each 1 requests.
Calling fsync() at the end of test, Enabled.
Using synchronous I/O mode
Doing random write test
Threads started!
Done.
Operations performed: 0 Read, 10000 Write, 10000 Other = 20000 Total
Read 0b Written 156.25Mb Total transferred 156.25Mb (463.9Kb/sec)
28.99 Requests/sec executed
Test execution summary:
total time: 344.9013s
total number of events: 10000
total time taken by event execution: 0.1453
per-request statistics:
min: 0.01ms
avg: 0.01ms
max: 0.07ms
approx. 95 percentile: 0.01ms
Threads fairness:
events (avg/stddev): 10000.0000/0.00
execution time (avg/stddev): 0.1453/0.00
And now without barriers:
/dev/sdb /data2 xfs
rw,noatime,attr2,nobarrier,logbufs=8,logbsize=256k,noquota 0 0
# sysbench --test=fileio --file-fsync-freq=1 --file-num=1
--file-total-size=16384 --file-test-mode=rndwr run
sysbench 0.4.10: multi-threaded system evaluation benchmark
Running the test with following options:
Number of threads: 1
Extra file open flags: 0
1 files, 16Kb each
16Kb total file size
Block size 16Kb
Number of random requests for random IO: 10000
Read/Write ratio for combined random IO test: 1.50
Periodic FSYNC enabled, calling fsync() each 1 requests.
Calling fsync() at the end of test, Enabled.
Using synchronous I/O mode
Doing random write test
Threads started!
Done.
Operations performed: 0 Read, 10000 Write, 10000 Other = 20000 Total
Read 0b Written 156.25Mb Total transferred 156.25Mb (62.872Mb/sec)
4023.81 Requests/sec executed
Test execution summary:
total time: 2.4852s
total number of events: 10000
total time taken by event execution: 0.1325
per-request statistics:
min: 0.01ms
avg: 0.01ms
max: 0.06ms
approx. 95 percentile: 0.01ms
Threads fairness:
events (avg/stddev): 10000.0000/0.00
execution time (avg/stddev): 0.1325/0.00
--
Best regards,
Hannes Dorbath
--
Sent via pgsql-performance mailing list (pgsql-performance@xxxxxxxxxxxxxx)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-performance
