We're about to try out a new BBU controller card, and would welcome any advice from anyone with experience with this hardware. It is an IBM ServeRAID-MR10M SAS/SATA Controller with the optional BBU. The docs say it is "a LSI1078ROC-based PCI Express RAID adapter." We're hooking it up to four drawers of 12 drives each; all drives are 146 GB 3.5 inch 15 kRPM HS SAS. Our hope is to set up three drawers in RAID 10. I don't know if this will work -- our previous adapter refused to allow more than 14 drives in RAID 10, so we had to use RAID 5 for the "big" partition. The other drawer will be RAID 5. Tips? -Kevin
