Hi All,
I tried posting this last week but it has not come through yet, so please
excuse me if there is a double post.
We're having some issue's with the vacuum times within our database
environment, and would like some input from the guru's out there that could
potentially suggest a better approach or mechanism.
------------------------------------------------------------------------------------
Problem Background
First off, I'm no PostgreSQL guru, so, please be nice :)
Over time we have noticed increased response times from the database which
has an adverse affect on our registration times. After doing some research
it appears that this may have been related to our maintenance regime, and
has thus been amended as follows:
[1] AutoVacuum runs during the day over the entire PostgreSQL cluster,
[2] A Vacuum Full Verbose is run during our least busy period (generally
03:30) against the Database,
[3] A Re-Index on the table is performed,
[4] A Cluster on the table is performed against the most used index,
[5] A Vacuum Analyze Verbose is run against the database.
These maintenance steps have been setup to run every 24 hours.
The database in essence, once loaded up and re-index is generally around
17MB for data and 4.7MB for indexes in size.
Over a period of 24 hours the database can grow up to around 250MB and the
indexes around 33MB (Worst case thus far). When the maintenance kicks in,
the vacuum full verbose step can take up to 15 minutes to complete (worst
case). The re-index, cluster and vacuum analyze verbose steps complete in
under 1 second each. The problem here is the vacuum full verbose, which
renders the environment unusable during the vacuum phase. The idea here is
to try and get the vacuum full verbose step to complete in less than a
minute. Ideally, if we could get it to complete quicker then that would be
GREAT, but our minimal requirement is for it to complete at the very most 1
minute. Looking at the specifications of our environment below, do you think
that this is at all possible?
------------------------------------------------------------------------------------
Environment Background:
We are running a VoIP service whereby the IP phones perform a registration
request every 113 seconds. These registration requests are verified against
the database and the details are updated accordingly. Currently we average
around 100 - 150 read/write requests per second to this particular database.
The requirement here is that the database response is sub 15 milliseconds
for both types of requests, which it currently is. The database _must_ also
be available 24x7.
------------------------------------------------------------------------------------
Hardware Environment:
SunFire X4200
2 x Dual Core Opteron 280's
8GB RAM
2 x Q-Logic Fibre Channel HBA's
Sun StorEdge 3511 FC SATA Array
1 x 1GB RAID Module
12 x 250GB 7200 RPM SATA disks
------------------------------------------------------------------------------------
RAID Environment:
5 Logical drives, each LD is made up of 2 x 250GB SATA HDD in a RAID 1
mirror.
2 x 250GB SATA HDD allocated as hot spares
The logical drives are partitioned and presented to the OS as follows:
LD0 (2 x 250GB SATA HDD's RAID 1)
Partition 0 (120GB)
Partition 1 (120GB)
LD1 (2 x 250GB SATA HDD's RAID 1)
Partition 0 (120GB)
Partition 1 (120GB)
LD2 (2 x 250GB SATA HDD's RAID 1)
Partition 0 (80GB)
Partition 1 (80GB)
Partition 2 (80GB)
LD3 (2 x 250GB SATA HDD's RAID 1)
Partition 0 (80GB)
Partition 1 (80GB)
Partition 2 (80GB)
LD4 (2 x 250GB SATA HDD's RAID 1)
Partition 0 (120GB)
Partition 1 (120GB)
-------------------------------------------------------------------------------------
OS Environment
Solaris 10 Update 3 (11/06)
Boot disks are 76GB 15000 RPM configure in a RAID 1 mirror.
-------------------------------------------------------------------------------------
Filesystem Layout
PostgreSQL Data
250GB ZFS file-system made up of:
LD0 Partition 0 Mirrored to LD1 Partition 0 (120GB)
LD0 Partition 1 Mirrored to LD1 Partition 1 (120GB)
The above 2 vdevs are then striped across each other
PostgreSQL WAL
80GB ZFS filesystem made up of:
LD2 Partition 0 Mirrored to LD3 Partition 0 (80GB)
LD2 partition 1 Mirrored to LD3 Partition 1 (80GB)
The above 2 vdevs are then striped across each other
-------------------------------------------------------------------------------------
PostgreSQL Configuration
PostgreSQL version 8.2.3
#---------------------------------------------------------------------------
# RESOURCE USAGE (except WAL)
#---------------------------------------------------------------------------
# - Memory -
shared_buffers = 1024MB # min 128kB or max_connections*16kB
# (change requires restart)
temp_buffers = 8MB # min 800kB
max_prepared_transactions = 200 # can be 0 or more
# (change requires restart) # Note:
increasing max_prepared_transactions costs ~600 bytes of shared memory # per
transaction slot, plus lock space (see max_locks_per_transaction).
work_mem = 1MB # min 64kB
maintenance_work_mem = 256MB # min 1MB
max_stack_depth = 2MB # min 100kB
# - Free Space Map -
max_fsm_pages = 2048000 # min max_fsm_relations*16, 6 bytes
each
# (change requires restart)
max_fsm_relations = 10000 # min 100, ~70 bytes each
# (change requires restart)
# - Kernel Resource Usage -
#max_files_per_process = 1000 # min 25
# (change requires restart)
#shared_preload_libraries = '' # (change requires restart)
# - Cost-Based Vacuum Delay -
vacuum_cost_delay = 200 # 0-1000 milliseconds
vacuum_cost_page_hit = 1 # 0-10000 credits
vacuum_cost_page_miss = 10 # 0-10000 credits
vacuum_cost_page_dirty = 20 # 0-10000 credits
vacuum_cost_limit = 200 # 0-10000 credits
# - Background writer -
#bgwriter_delay = 200ms # 10-10000ms between rounds
#bgwriter_lru_percent = 1.0 # 0-100% of LRU buffers
scanned/round
#bgwriter_lru_maxpages = 5 # 0-1000 buffers max written/round
#bgwriter_all_percent = 0.333 # 0-100% of all buffers
scanned/round
#bgwriter_all_maxpages = 5 # 0-1000 buffers max written/round
#---------------------------------------------------------------------------
# WRITE AHEAD LOG
#---------------------------------------------------------------------------
# - Settings -
fsync = on # turns forced synchronization on or
off
wal_sync_method = open_datasync # the default is the first option
# supported by the operating system:
# open_datasync
# fdatasync
# fsync
# fsync_writethrough
# open_sync
#full_page_writes = on # recover from partial page writes
wal_buffers = 512kB # min 32kB
# (change requires restart)
commit_delay = 10000 # range 0-100000, in microseconds
commit_siblings = 50 # range 1-1000
# - Checkpoints -
checkpoint_segments = 128 # in logfile segments, min 1, 16MB
each
checkpoint_timeout = 5min # range 30s-1h
checkpoint_warning = 5min # 0 is off
#---------------------------------------------------------------------------
# QUERY TUNING
#---------------------------------------------------------------------------
# - Planner Method Configuration -
#enable_bitmapscan = on
#enable_hashagg = on
#enable_hashjoin = on
#enable_indexscan = on
#enable_mergejoin = on
#enable_nestloop = on
#enable_seqscan = on
#enable_sort = on
#enable_tidscan = on
# - Planner Cost Constants -
#seq_page_cost = 1.0 # measured on an arbitrary scale
random_page_cost = 2.0 # same scale as above
#cpu_tuple_cost = 0.01 # same scale as above
#cpu_index_tuple_cost = 0.005 # same scale as above
#cpu_operator_cost = 0.0025 # same scale as above
effective_cache_size = 5120MB
# - Genetic Query Optimizer -
#geqo = on
#geqo_threshold = 12
#geqo_effort = 5 # range 1-10
#geqo_pool_size = 0 # selects default based on effort
#geqo_generations = 0 # selects default based on effort
#geqo_selection_bias = 2.0 # range 1.5-2.0
# - Other Planner Options -
#default_statistics_target = 10 # range 1-1000
#constraint_exclusion = off
#from_collapse_limit = 8
#join_collapse_limit = 8 # 1 disables collapsing of explicit
# JOINs
#---------------------------------------------------------------------------
# RUNTIME STATISTICS
#---------------------------------------------------------------------------
# - Query/Index Statistics Collector -
stats_command_string = on
update_process_title = on
stats_start_collector = on # needed for block or row stats
# (change requires restart)
stats_block_level = on stats_row_level = on
stats_reset_on_server_start = off # (change requires restart)
# - Statistics Monitoring -
#log_parser_stats = off
#log_planner_stats = off
#log_executor_stats = off
#log_statement_stats = off
#---------------------------------------------------------------------------
# AUTOVACUUM PARAMETERS
#---------------------------------------------------------------------------
autovacuum = on # enable autovacuum subprocess?
# 'on' requires
stats_start_collector
# and stats_row_level to also be on
autovacuum_naptime = 1min # time between autovacuum runs
autovacuum_vacuum_threshold = 500 # min # of tuple updates before
# vacuum
autovacuum_analyze_threshold = 250 # min # of tuple updates before
# analyze
autovacuum_vacuum_scale_factor = 0.2 # fraction of rel size before
# vacuum
autovacuum_analyze_scale_factor = 0.1 # fraction of rel size before
# analyze
autovacuum_freeze_max_age = 200000000 # maximum XID age before forced
vacuum
# (change requires restart)
autovacuum_vacuum_cost_delay = -1 # default vacuum cost delay for
# autovacuum, -1 means use
# vacuum_cost_delay
autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for
# autovacuum, -1 means use
# vacuum_cost_limit
------------------------------------------------------------------------------------
Database Environment
There are 18 databases running within this PostgreSQL cluster, the database
we are having the vacuum issue with is described as follows:
List of relations
Schema | Name | Type | Owner
--------+---------------------+----------+------------
public | dialplans | table |
public | extensions | table |
public | extensions_id_seq | sequence |
public | iaxaccounts | table |
public | numbercategories | table |
public | numbers | table |
public | numbersubcategories | table |
public | portnumbers | table |
public | portrequests | table |
public | sipaccounts | table |
public | voicemailaccounts | table |
The table (with indexes) being used the most is described as follows:
Table "public.sipaccounts"
Column | Type | Modifiers
--------------------+--------------------------+------------------------
--------------------+--------------------------+----------------------
id | character varying(36) | not null
name | character varying(80) | not null
accountcode | character varying(20) |
amaflags | character varying(13) |
callgroup | character varying(10) |
callerid | character varying(80) |
canreinvite | character(3) | default 'no'::bpchar
context | character varying(80) |
defaultip | character varying(15) |
dtmfmode | character varying(7) |
fromuser | character varying(80) |
fromdomain | character varying(80) |
fullcontact | character varying(80) |
host | character varying(31) | not null default
''::character varying
insecure | character varying(11) |
language | character(2) |
mailbox | character varying(50) |
md5secret | character varying(80) |
nat | character varying(5) | not null default
'no'::character varying
deny | character varying(95) |
permit | character varying(95) |
mask | character varying(95) |
pickupgroup | character varying(10) |
port | character varying(5) | not null default
''::character varying
qualify | character(4) |
restrictcid | character(1) |
rtptimeout | character(3) |
rtpholdtimeout | character(5) |
secret | character varying(80) |
type | character varying(6) | not null default
'friend'::character varying
username | character varying(80) | not null default
''::character varying
disallow | character varying(100) |
allow | character varying(100) |
musiconhold | character varying(100) |
regseconds | integer | not null default 0
ipaddr | character varying(15) | not null default
''::character varying
regexten | character varying(80) | not null default
''::character varying
cancallforward | character(3) | default 'yes'::bpchar
setvar | character varying(100) | not null default
''::character varying
inserted | timestamp with time zone | not null default now()
lastregister | timestamp with time zone |
useragent | character varying(128) |
natsendkeepalives | character(1) | default 'n'::bpchar
natconnectionstate | character(1) |
outboundproxyport | character varying(5) | not null default
''::character varying
outboundproxy | character varying(31) | not null default
''::character varying
voicemailextension | character varying(128) |
pstncallerid | character varying(24) | default 'Uknown'::character
varying
dialplan | character varying(64) |
whitelabelid | character varying(32) |
localcallprefix | character varying(10) |
Indexes:
"sippeers_pkey" PRIMARY KEY, btree (id), tablespace "bf_service_idx"
"sippeers_name_key" UNIQUE, btree (name) CLUSTER, tablespace
"bf_service_idx"
"accountcode_index" btree (accountcode), tablespace "bf_service_idx"
If anyone has any comments/suggestions please feel free to respond. Any
responses are most welcome.
Thanks
Bruce
