Opteron/FreeBSD/PostgreSQL performance poor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We're in the process of porting from Informix 9.4 to PostgreSQL 8.1.3. Our PostgreSQL server is an AMD Opteron Dual Core 275 with two 2.2 Ghz 64-bit processors. There are two internal drives and an external enclosure containing 14 drives (configured as 7 pairs of mirrored drives - four pairs for table spaces, one pair for dbcluster, two pairs for point in time recovery). The operating system is FreeBSD 6.0-RELEASE #10

The output from ulimit -a is:

ulimit -a
core file size          (blocks, -c) unlimited
data seg size           (kbytes, -d) 33554432
file size               (blocks, -f) unlimited
max locked memory       (kbytes, -l) unlimited
max memory size         (kbytes, -m) unlimited
open files                      (-n) 11095
pipe size            (512 bytes, -p) 1
stack size              (kbytes, -s) 524288
cpu time               (seconds, -t) unlimited
max user processes              (-u) 5547
virtual memory          (kbytes, -v) unlimited

Shared memory kernel parameters are set to:

shmmax       1073741000
shmmin       1
shmall       262144
shmseg       128
shmmni       192
semmni       256
semmns       512
semmsl       256
semmap       256
semvmx       32767
shm_use_phys 1

The postgresql.conf file contains:

#---------------------------------------------------------------------------
# FILE LOCATIONS
#---------------------------------------------------------------------------

# The default values of these variables are driven from the -D command line
# switch or PGDATA environment variable, represented here as ConfigDir.

#data_directory = 'ConfigDir'           # use data in another directory
#hba_file = 'ConfigDir/pg_hba.conf'     # host-based authentication file
#ident_file = 'ConfigDir/pg_ident.conf' # IDENT configuration file

# If external_pid_file is not explicitly set, no extra pid file is written.

#external_pid_file = '(none)'           # write an extra pid file


#---------------------------------------------------------------------------
# CONNECTIONS AND AUTHENTICATION
#---------------------------------------------------------------------------

# - Connection Settings -

listen_addresses = '*'                  # what IP address(es) to listen on;
# comma-separated list of addresses; # defaults to 'localhost', '*' = all
port = 5432
max_connections = 102
# note: increasing max_connections costs ~400 bytes of shared memory per
# connection slot, plus lock space (see max_locks_per_transaction).  You
# might also need to raise shared_buffers to support more connections.
superuser_reserved_connections = 2
unix_socket_directory = ''
unix_socket_group = ''
unix_socket_permissions = 0777          # octal
bonjour_name = ''                       # defaults to the computer name

# - Security & Authentication -

authentication_timeout = 60             # 1-600, in seconds
ssl = off
password_encryption = on
db_user_namespace = off

# Kerberos

krb_server_keyfile = ''
krb_srvname = 'postgres'
krb_server_hostname = '' # empty string matches any keytab entry
krb_caseins_users = off

# - TCP Keepalives -
# see 'man 7 tcp' for details

tcp_keepalives_idle = 0                 # TCP_KEEPIDLE, in seconds;
                                        # 0 selects the system default
tcp_keepalives_interval = 0             # TCP_KEEPINTVL, in seconds;
                                        # 0 selects the system default
tcp_keepalives_count = 0                # TCP_KEEPCNT;
                                        # 0 selects the system default


#---------------------------------------------------------------------------
# RESOURCE USAGE (except WAL)
#---------------------------------------------------------------------------

# - Memory -

shared_buffers = 125000 # min 16 or max_connections*2, 8KB each
temp_buffers = 1000                     # min 100, 8KB each
max_prepared_transactions = 0           # can be 0 or more
# note: increasing max_prepared_transactions costs ~600 bytes of shared memory
# per transaction slot, plus lock space (see max_locks_per_transaction).
work_mem = 10000                        # min 64, size in KB
maintenance_work_mem = 50000            # min 1024, size in KB
max_stack_depth = 500000                # in 100, size in KB
                                        # ulimit -a or ulimit -s

# - Free Space Map -

max_fsm_pages = 600000 # min max_fsm_relations*16, 6 bytes each
max_fsm_relations = 1000                # min 100, ~70 bytes each

# - Kernel Resource Usage -

max_files_per_process = 1000            # min 25
preload_libraries = ''

# - Cost-Based Vacuum Delay -

vacuum_cost_delay = 0                   # 0-1000 milliseconds
vacuum_cost_page_hit = 1                # 0-10000 credits
vacuum_cost_page_miss = 10              # 0-10000 credits
vacuum_cost_page_dirty = 20             # 0-10000 credits
vacuum_cost_limit = 200                 # 0-10000 credits

# - Background writer -

bgwriter_delay = 200 # 10-10000 milliseconds between rounds bgwriter_lru_percent = 1.0 # 0-100% of LRU buffers scanned/round
bgwriter_lru_maxpages = 1000            # 0-1000 buffers max written/round
bgwriter_all_percent = 0.333 # 0-100% of all buffers scanned/round
bgwriter_all_maxpages = 1000            # 0-1000 buffers max written/round


#---------------------------------------------------------------------------
# WRITE AHEAD LOG
#---------------------------------------------------------------------------

# - Settings -

fsync = on # turns forced synchronization on or off
wal_sync_method = fsync                 # the default is the first option
# supported by the operating system:
                                        #   open_datasync
                                        #   fdatasync
                                        #   fsync
                                        #   fsync_writethrough
                                        #   open_sync
full_page_writes = on                   # recover from partial page writes
wal_buffers = 64                        # min 4, 8KB each
commit_delay = 0                        # range 0-100000, in microseconds
commit_siblings = 5                     # range 1-1000

# - Checkpoints -

checkpoint_segments = 120 # in logfile segments, min 1, 16MB each
checkpoint_timeout = 900                # range 30-3600, in seconds
checkpoint_warning = 900                # in seconds, 0 is off

# - Archiving -

archive_command = 'archive_wal -email -txtmsg "%p" "%f"' # command to use
                                        # to archive a logfile segment


#---------------------------------------------------------------------------
# QUERY TUNING
#---------------------------------------------------------------------------

# - Planner Method Configuration -

enable_bitmapscan = on
enable_hashagg = on
enable_hashjoin = on
enable_indexscan = on
enable_mergejoin = on
enable_nestloop = on
enable_seqscan = on
enable_sort = on
enable_tidscan = on

# - Planner Cost Constants -

effective_cache_size = 27462            # typically 8KB each
# On TRU64 do /sbin/sysconfig -q advfs # to get the size o AdvfsCacheMaxPercent # (default is 7% of RAM). On FreeBSD set # to sysctl -n vfs.hibufspace / 8192 random_page_cost = 2 # units are one sequential page fetch
                                        # cost
cpu_tuple_cost = 0.01                   # (same)
cpu_index_tuple_cost = 0.001            # (same)
cpu_operator_cost = 0.0025              # (same)

# - Genetic Query Optimizer -

geqo = on
geqo_threshold = 12
geqo_effort = 5                         # range 1-10
geqo_pool_size = 0                      # selects default based on effort
geqo_generations = 0                    # selects default based on effort
geqo_selection_bias = 2.0               # range 1.5-2.0

# - Other Planner Options -

default_statistics_target = 100         # range 1-1000
constraint_exclusion = off
from_collapse_limit = 8
join_collapse_limit = 8                 # 1 disables collapsing of explicit
                                        # JOINs


#---------------------------------------------------------------------------
# ERROR REPORTING AND LOGGING
#---------------------------------------------------------------------------

# - Where to Log -

log_destination = 'stderr'              # Valid values are combinations of
                                        # stderr, syslog and eventlog,
                                        # depending on platform.

# This is used when logging to stderr:
redirect_stderr = on # Enable capturing of stderr into log
                                        # files

# These are only used if redirect_stderr is on:
log_directory = 'pg_log' # Directory where log files are written # Can be absolute or relative to PGDATA
log_filename = 'postgresql_log.%a'      # Log file name pattern.
                                        # Can include strftime() escapes
log_truncate_on_rotation = on # If on, any existing log file of the # same name as the new log file will be # truncated rather than appended to. But
                                        # such truncation only occurs on
# time-driven rotation, not on restarts # or size-driven rotation. Default is # off, meaning append to existing files
                                        # in all cases.
log_rotation_age = 1440 # Automatic rotation of logfiles will # happen after so many minutes. 0 to
                                        # disable.
log_rotation_size = 10240 # Automatic rotation of logfiles will # happen after so many kilobytes of log
                                        # output.  0 to disable.

# These are relevant when logging to syslog:
syslog_facility = 'LOCAL0'
syslog_ident = 'postgres'


# - When to Log -

client_min_messages = log # Values, in order of decreasing detail:
                                        #   debug5
                                        #   debug4
                                        #   debug3
                                        #   debug2
                                        #   debug1
                                        #   log
                                        #   notice
                                        #   warning
                                        #   error

log_min_messages = notice # Values, in order of decreasing detail:
                                        #   debug5
                                        #   debug4
                                        #   debug3
                                        #   debug2
                                        #   debug1
                                        #   info
                                        #   notice
                                        #   warning
                                        #   error
                                        #   log
                                        #   fatal
                                        #   panic

log_error_verbosity = default # terse, default, or verbose messages

log_error_verbosity = default # terse, default, or verbose messages

#log_min_error_statement = notice # Values in order of increasing severity:
                                        #   debug5
                                        #   debug4
                                        #   debug3
                                        #   debug2
                                        #   debug1
                                        #   info
                                        #   notice
                                        #   warning
                                        #   error
                                        #   panic(off)

log_min_duration_statement = 1000 # -1 is disabled, 0 logs all statements # and their durations, in milliseconds.

silent_mode = off                       # DO NOT USE without syslog or
                                        # redirect_stderr

# - What to Log -

debug_print_parse = off
debug_print_rewritten = off
debug_print_plan = off
debug_pretty_print = off
log_connections = off
log_disconnections = off
log_duration = off
log_line_prefix = '%t'                  # Special values:
                                        #   %u = user name
                                        #   %d = database name
                                        #   %r = remote host and port
                                        #   %h = remote host
                                        #   %p = PID
# %t = timestamp (no milliseconds) # %m = timestamp with milliseconds
                                        #   %i = command tag
                                        #   %c = session id
                                        #   %l = session line number
                                        #   %s = session start timestamp
                                        #   %x = transaction id
                                        #   %q = stop here in non-session
                                        #        processes
                                        #   %% = '%'
                                        # e.g. '<%u%%%d> '
log_statement = 'none'                  # none, mod, ddl, all
log_hostname = off


#---------------------------------------------------------------------------
# RUNTIME STATISTICS
#---------------------------------------------------------------------------

# - Statistics Monitoring -

log_parser_stats = off
log_planner_stats = off
log_executor_stats = off
log_statement_stats = off

# - Query/Index Statistics Collector -

stats_start_collector = on
stats_command_string = on
stats_block_level = on
stats_row_level = on
stats_reset_on_server_start = off


#---------------------------------------------------------------------------
# AUTOVACUUM PARAMETERS
#---------------------------------------------------------------------------

autovacuum = off                        # enable autovacuum subprocess?
autovacuum_naptime = 60 # time between autovacuum runs, in secs
autovacuum_vacuum_threshold = 1000      # min # of tuple updates before
                                        # vacuum
autovacuum_analyze_threshold = 500      # min # of tuple updates before
                                        # analyze
autovacuum_vacuum_scale_factor = 0.4    # fraction of rel size before
                                        # vacuum
autovacuum_analyze_scale_factor = 0.2   # fraction of rel size before
                                        # analyze
autovacuum_vacuum_cost_delay = -1       # default vacuum cost delay for
                                        # autovac, -1 means use
                                        # vacuum_cost_delay
autovacuum_vacuum_cost_limit = -1       # default vacuum cost limit for
                                        # autovac, -1 means use
                                        # vacuum_cost_limit


#---------------------------------------------------------------------------
# CLIENT CONNECTION DEFAULTS
#---------------------------------------------------------------------------

# - Statement Behavior -

search_path = '$user'                   # schema names
default_tablespace = ''                 # a tablespace name, '' uses
                                        # the default
check_function_bodies = on
default_transaction_isolation = 'read committed'
default_transaction_read_only = off
statement_timeout = 7200000             # 0 is disabled, in milliseconds

# - Locale and Formatting -

datestyle = 'iso, mdy'
timezone = unknown                      # actually, defaults to TZ
                                        # environment setting
australian_timezones = off
extra_float_digits = 0                  # min -15, max 2
client_encoding = sql_ascii             # actually, defaults to database
                                        # encoding

# These settings are initialized by initdb -- they might be changed
lc_messages = 'C'                       # locale for system error message
                                        # strings
lc_monetary = 'C'                       # locale for monetary formatting
lc_numeric = 'C'                        # locale for number formatting
lc_time = 'C'                           # locale for time formatting

# - Other Defaults -

explain_pretty_print = on
dynamic_library_path = '$libdir'


#---------------------------------------------------------------------------
# LOCK MANAGEMENT
#---------------------------------------------------------------------------

deadlock_timeout = 7200000              # in milliseconds
max_locks_per_transaction = 500         # min 10
# note: each lock table slot uses ~220 bytes of shared memory, and there are
# max_locks_per_transaction * (max_connections + max_prepared_transactions)
# lock table slots.


#---------------------------------------------------------------------------
# VERSION/PLATFORM COMPATIBILITY
#---------------------------------------------------------------------------

# - Previous Postgres Versions -

add_missing_from = off
regex_flavor = advanced                 # advanced, extended, or basic
sql_inheritance = on
default_with_oids = off
escape_string_warning = off

# - Other Platforms & Clients -

transform_null_equals = off


#---------------------------------------------------------------------------
# CUSTOMIZED OPTIONS
#---------------------------------------------------------------------------

#custom_variable_classes = '' # list of custom variable class names

NOTE - raising shared_buffers had no effect
NOTE - changing stats_command_string had no effect

The pg_hba.conf file contains:

# TYPE    DATABASE         USER         CIDR-ADDRESS          METHOD

# "local" is for Unix domain socket connections only
local     all              postgre                            trust
# IPv4 local connections:
host      all              postgre       127.0.0.1/32         trust
hostnossl operations       opps,opps_adm 10.1.10.0/8          trust
hostnossl development,work all           10.1.10.0/8          trust
# IPv6 local connections:
host      all              postgre       ::1/128              trust

The pg_ident.conf file, other than comments, is empty.

We're running an OLTP database with a small number of connections (<50) performing mostly reads and inserts on modest sized tables (largest is < 2,000,000 records).

The symptoms are:

a) All 4 CPUs are nearly always 0% idle;
b) The system load level is nearly always in excess of 20;
c) the output from vmstat -w 10 looks like:
 procs      memory      page                    disks     faults      cpu
r b w avm fre flt re pi po fr sr aa0 aa1 in sy cs us sy id 21 0 3 1242976 327936 2766 0 0 0 2264 0 2 2 17397 140332 104846 18 82 1 21 0 3 1242932 313312 2761 0 0 0 1223 0 1 1 15989 128666 107019 13 86 1 19 3 0 1245908 275356 3762 0 0 0 1962 0 3 3 16397 131584 105792 14 85 1 21 0 2 1243968 262616 2006 0 0 0 2036 0 1 1 15260 122801 107406 14 85 1 4 19 0 1240996 247004 1589 0 0 0 984 0 1 0 15403 121323 108331 12 87 2 17 1 2 1230744 252888 2440 0 0 0 1807 0 1 0 17977 142618 105600 15 84 2
NOTE - small user demands and high system demands
d) Running top indicates a significant number or sblock states and occasional smwai states;
e) ps auxww | grep postgres doesn't show anything abnormal;
f) ESQL applications are very slow.

We VACUUM ANALYZE user databases every four hours. We VACUUM template1 every 4 hours. We make a copy of the current WAL every minute. We create a PIT recovery archive daily daily. None of these, individually seem to place much strain on the server.

Hopefully I've supplied enough information to start diagnosing the problem. Any ideas, thoughts, suggestions are greatly appreciated ...


Andy

--
--------------------------------------------------------------------------------
Andrew Rost
National Operational Hydrologic Remote Sensing Center (NOHRSC)
National Weather Service, NOAA
1735 Lake Dr. West, Chanhassen, MN 55317-8582
Voice: (952)361-6610 x 234
Fax: (952)361-6634
andy.rost@xxxxxxxx
http://www.nohrsc.noaa.gov
--------------------------------------------------------------------------------




[Postgresql General]     [Postgresql PHP]     [PHP Users]     [PHP Home]     [PHP on Windows]     [Kernel Newbies]     [PHP Classes]     [PHP Books]     [PHP Databases]     [Yosemite]

  Powered by Linux