Re: [Bizgres-general] Introducing a new linux

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Title: Re: [Bizgres-general] [PERFORM] Introducing a new linux readahead framework
Jim,

I’m thinking about it, we’re already using a fixed read-ahead of 16MB using blockdev on the stock Redhat 2.6.9 kernel, it would be nice to not have to set this so we may try it.

- Luke


On 4/26/06 3:28 PM, "Jim C. Nasby" <jnasby@xxxxxxxxxxxxx> wrote:

(including bizgres-general)

Has anyone done any testing on bizgres? It's got some patches that
eliminate a lot of IO bottlenecks, so it might present even larger
gains.

On Wed, Apr 26, 2006 at 03:08:59PM -0500, Steve Poe wrote:
> I found an average 14% improvement Using Pg 7.4.11 with odbc-bench as my
> test bed with Wu's kernel patch. I have not tried version 8.x yet.
>
> Thanks Wu.
>
> Steve Poe
>
> Using Postgresql 7.4.11, on an dual Opteron with 4GB
>
> On Fri, 2006-04-21 at 09:38 +0800, Wu Fengguang wrote:
> > Greetings,
> >
> > I'd like to introduce a new readahead framework for the linux kernel:
> > http://www.ussg.iu.edu/hypermail/linux/kernel/0603.2/1021.html
> >
> > HOW IT WORKS
> >
> > In adaptive readahead, the context based method may be of particular
> > interest to postgresql users. It works by peeking into the file cache
> > and check if there are any history pages present or accessed. In this
> > way it can detect almost all forms of sequential / semi-sequential read
> > patterns, e.g.
> >     - parallel / interleaved sequential scans on one file
> >     - sequential reads across file open/close
> >     - mixed sequential / random accesses
> >     - sparse / skimming sequential read
> >
> > It also have methods to detect some less common cases:
> >     - reading backward
> >     - seeking all over reading N pages
> >
> > WAYS TO BENEFIT FROM IT
> >
> > As we know, postgresql relies on the kernel to do proper readahead.
> > The adaptive readahead might help performance in the following cases:
> >     - concurrent sequential scans
> >     - sequential scan on a fragmented table
> >       (some DBs suffer from this problem, not sure for pgsql)
> >     - index scan with clustered matches
> >     - index scan on majority rows (in case the planner goes wrong)
> >
> > TUNABLE PARAMETERS
> >
> > There are two parameters which are described in this email:
> > http://www.ussg.iu.edu/hypermail/linux/kernel/0603.2/1024.html
> >
> > Here are the more oriented guidelines for postgresql users:
> >
> > - /proc/sys/vm/readahead_ratio
> > Since most DB servers are bounty of memory, the danger of readahead
> > thrashing is near to zero. In this case, you can set readahead_ratio to
> > 100(or even 200:), which helps the readahead window to scale up rapidly.
> >
> > - /proc/sys/vm/readahead_hit_rate
> > Sparse sequential reads are read patterns like {0, 2, 4, 5, 8, 11, ...}.
> > In this case we might prefer to do readahead to get good I/O performance
> > with the overhead of some useless pages. But if you prefer not to do so,
> > set readahead_hit_rate to 1 will disable this feature.
> >
> > - /sys/block/sd<X>/queue/read_ahead_kb
> > Set it to a large value(e.g. 4096) as you used to do.
> > RAID users might want to use a bigger number.
> >
> > TRYING IT OUT
> >
> > The latest patch for stable kernels can be downloaded here:
> > http://www.vanheusden.com/ara/
> >
> > Before compiling, make sure that the following options are enabled:
> > Processor type and features -> Adaptive file readahead
> > Processor type and features ->   Readahead debug and accounting
> >
> > HELPING AND CONTRIBUTING
> >
> > The patch is open to fine-tuning advices :)
> > Comments and benchmarking results are highly appreciated.
> >
> > Thanks,
> > Wu
> >
> > ---------------------------(end of broadcast)---------------------------
> > TIP 4: Have you searched our list archives?
> >
> >                http://archives.postgresql.org
>
>
> ---------------------------(end of broadcast)---------------------------
> TIP 4: Have you searched our list archives?
>
>                http://archives.postgresql.org
>

--
Jim C. Nasby, Sr. Engineering Consultant      jnasby@xxxxxxxxxxxxx
Pervasive Software      http://pervasive.com    work: 512-231-6117
vcard: http://jim.nasby.net/pervasive.vcf       cell: 512-569-9461
_______________________________________________
Bizgres-general mailing list
Bizgres-general@xxxxxxxxxxxxx
http://pgfoundry.org/mailman/listinfo/bizgres-general




[Postgresql General]     [Postgresql PHP]     [PHP Users]     [PHP Home]     [PHP on Windows]     [Kernel Newbies]     [PHP Classes]     [PHP Books]     [PHP Databases]     [Yosemite]

  Powered by Linux