Do you have a hw reference that runs that fast (5 x 30 = 150MB/s) ? Luke Lonergan a écrit : Joshua, On 2/24/06 9:19 AM, "Joshua D. Drake" <jd@xxxxxxxxxxxxxxxxx> wrote:This machine... if you run it in raid 5 will only get 7-9 megabytes a second READ! performance. That is with 6 SCSI drives. If you run it in RAID 10 you get a more reasonable 50-55 megabytes per second. I don't have it sitting in front of me or I would give you an exact model number. This machine also uses the serverworks chipset which is known to be a catastrophe.I'd be more shocked if this weren't also true of nearly all SCSI HW RAID adapters of this era. If you had ordered an HP DL380 server you'd get about the same performance. BTW - I don't think there's anything reasonable about 50-55 MB/s from 6 disks, I'd put the minimum for this era machine at 5 x 30 = 150MB/s. - Luke ---------------------------(end of broadcast)--------------------------- TIP 1: if posting/reading through Usenet, please send an appropriate subscribe-nomail command to majordomo@xxxxxxxxxxxxxx so that your message can get through to the mailing list cleanly |