On Mon, 19 Dec 2005, Anjan Dave wrote:
I am not sure if there's an obvious answer to this...If there's a choice of an external RAID10 (Fiber Channel 6 or 8 15Krpm drives) enabled drives, what is more beneficial to store on it, the WAL, or the Database files? One of the other would go on the local RAID10 (4 drives, 15Krpm) along with the OS.
the WAL is small compared to the data, and it's mostly sequential access, so it doesn't need many spindles, it just needs them more-or-less dedicated to the WAL and not distracted by other things.
the data is large (by comparison), and is accessed randomly, so the more spindles that you can throw at it the better.
In your place I would consider making the server's internal drives into two raid1 pairs (one for the OS, one for the WAL), and then going with raid10 on the external drives for your data
This is a very busy database with high concurrent connections, random reads and writes. Checkpoint segments are 300 and interval is 6 mins. Database size is less than 50GB.
this is getting dangerously close to being able to fit in ram. I saw an article over the weekend that Samsung is starting to produce 8G DIMM's, that can go 8 to a controller (instead of 4 per as is currently done), when motherboards come out that support this you can have 64G of ram per opteron socket. it will be pricy, but the performance....
in the meantime you can already go 4G/slot * 4 slots/socket and get 64G on a 4-socket system. it won't be cheap, but the performance will blow away any disk-based system.
for persistant storage you can replicate from your ram-based system to a disk-based system, and as long as your replication messages hit disk quickly you can allow the disk-based version to lag behind in it's updates during your peak periods (as long as it is able to catch up with the writes overnight), and as the disk-based version won't have to do the seeks for the reads it will be considerably faster then if it was doing all the work (especially if you have good, large battery-backed disk caches to go with those drives to consolodate the writes)
It has become a bit more confusing because I am trying to allot shared storage across several hosts, and want to be careful not to overload one of the 2 storage processors.
there's danger here, if you share spindles with other apps you run the risk of slowing down your database significantly. you may be better off with fewer, but dedicated drives rather then more, but shared drives.
David Lang
