Joost,
I've got experience with these controllers and which version do you
have. I'd expect to see higher than 50MB/s although I've never tried
RAID 5
I routinely see closer to 100MB/s with RAID 1+0 on their 9000 series
I would also suggest that shared buffers should be higher than 7500,
closer to 30000, and effective cache should be up around 200k
work_mem is awfully high, remember that this will be given to each
and every connection and can be more than 1x this number per
connection depending on the number of sorts
done in the query.
fsync=false ? I'm not even sure why we have this option, but I'd
never set it to false.
Dave
On 6-Nov-05, at 8:30 AM, Joost Kraaijeveld wrote:
Hi,
I am experiencing very long update queries and I want to know if it
reasonable to expect them to perform better.
The query below is running for more than 1.5 hours (5500 seconds) now,
while the rest of the system does nothing (I don't even type or move a
mouse...).
- Is that to be expected?
- Is 180-200 tps with ~ 9000 KB (see output iostat below) not low,
given
the fact that fsync is off? (Note: with bonnie++ I get write
performance > 50 MB/sec and read performace > 70 MB/sec with > 2000
read/write ops /sec?
- Does anyone else have any experience with the 3Ware RAID controller
(which is my suspect)?
- Any good idea how to determine the real botleneck if this is not the
performance I can expect?
My hard- and software:
- PostgreSQL 8.0.3
- Debian 3.1 (Sarge) AMD64
- Dual Opteron
- 4GB RAM
- 3ware Raid5 with 5 disks
Pieces of my postgresql.conf (All other is default):
shared_buffers = 7500
work_mem = 260096
fsync=false
effective_cache_size = 32768
The query with explain (amount and orderbedrag_valuta are float8,
ordernummer and ordernumber int4):
explain update prototype.orders set amount =
odbc.orders.orderbedrag_valuta from odbc.orders where ordernumber =
odbc.orders.ordernummer;
QUERY PLAN
----------------------------------------------------------------------
-------
Hash Join (cost=50994.74..230038.17 rows=1104379 width=466)
Hash Cond: ("outer".ordernumber = "inner".ordernummer)
-> Seq Scan on orders (cost=0.00..105360.68 rows=3991868
width=455)
-> Hash (cost=48233.79..48233.79 rows=1104379 width=15)
-> Seq Scan on orders (cost=0.00..48233.79 rows=1104379
width=15)
Sample output from iostat during query (about avarage):
Device: tps kB_read/s kB_wrtn/s kB_read kB_wrtn
hdc 0.00 0.00 0.00 0 0
sda 0.00 0.00 0.00 0 0
sdb 187.13 23.76 8764.36 24 8852
--
Groeten,
Joost Kraaijeveld
Askesis B.V.
Molukkenstraat 14
6524NB Nijmegen
tel: 024-3888063 / 06-51855277
fax: 024-3608416
e-mail: J.Kraaijeveld@xxxxxxxxxx
web: www.askesis.nl
---------------------------(end of
broadcast)---------------------------
TIP 1: if posting/reading through Usenet, please send an appropriate
subscribe-nomail command to majordomo@xxxxxxxxxxxxxx so that
your
message can get through to the mailing list cleanly
---------------------------(end of broadcast)---------------------------
TIP 9: In versions below 8.0, the planner will ignore your desire to
choose an index scan if your joining column's datatypes do not
match
