Re: "postgres" is needed by initdb but was not found

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hmm - Postgres will refuse to run as the root user (security reasons).


On 08/07/18 23:21, Mohammed Shahid Nawaz wrote:
Hi Mark,
I have built the source code on 64bit and trying to run on 64bit system.

The same build  works on 64bit  non-root user login of the same system.


Thanks,
Mohammed Shahid Nawaz

On Sun 8 Jul, 2018, 3:38 PM Mark Kirkwood, <mark.kirkwood@xxxxxxxxxxxxxxx <mailto:mark.kirkwood@xxxxxxxxxxxxxxx>> wrote:

    The message 'invalid binary' suggests the wrong architecture binaries
    are installed (e.g 32 bit on 64 bit machine or vice versa). if you
    were
    missing the initdb binary your would get a different message (e.g):

    The The program "initdb" is needed by pg_ctl but was not found in the
    same directory as "/usr/local/bin/pg_ctl".

    regards
    Mark

    On 07/07/18 17:37, Mohammed Shahid Nawaz wrote:
    > Hi Shreeyansh,
    > Thank you for the feedback.
    > The problem continues to exist even while using initdb command.
    >
    > I had been using pg_ctl to initiate a db in my earlier version
    9.6.3
    > as well.
    >
    > The command goes as follows, and its working on non-root user login
    > for the same build version 10.4.
    >
    > su - postgres -c '/root/pgsql10x/bin/pg_ctl -D /root/pgsql10x/data/
    > initdb'
    >
    >
    > Thanks,
    > Mohammed Shahid Nawaz
    >
    > On Sat 7 Jul, 2018, 10:42 AM Shreeyansh Dba,
    <shreeyansh2014@xxxxxxxxx <mailto:shreeyansh2014@xxxxxxxxx>
    > <mailto:shreeyansh2014@xxxxxxxxx
    <mailto:shreeyansh2014@xxxxxxxxx>>> wrote:
    >
    >     Hi Mohammed,
    >
    >     As I suspect that you are trying to create a cluster but
    pg_ctl is
    >     a not a valid option to create a cluster.
    >
    >     You can use initdb option for creating a cluster...
    >
    >     Hope this helps.
    >
    >
    >     <http://www.shreeyansh.com>
    >
    >     On Fri, Jul 6, 2018 at 11:16 PM, mohammed shahid
    >     <mohammedshahid.r@xxxxxxxxx
    <mailto:mohammedshahid.r@xxxxxxxxx>
    <mailto:mohammedshahid.r@xxxxxxxxx
    <mailto:mohammedshahid.r@xxxxxxxxx>>>
    >     wrote:
    >
    >         Hi Kevin,
    >
    >         I am new to this forum, but even i am facing this issue as
    >         reported where i
    >         get the below error.
    >
    >          sudo -u shahid ./pg_ctl -D /root/pgsql10x/data/ initdb
    >         invalid binary "/root/pgsql10x/bin/pg_ctl"
    >         invalid binary "/root/pgsql10x/bin/pg_ctl"
    >         invalid binary "/root/pgsql10x/bin/pg_ctl"
    >         The program "initdb" is needed by pg_ctl but was not
    found in the
    >         same directory as "pg_ctl".
    >         Check your installation.
    >
    >         FYI ,
    >         I am trying to run this from root.
    >         As reported by H S, even i have built from the source. I am
    >         trying version
    >         10. on CentOS7.
    >         I downloaded direct from postgres site.
    >         I am not facing this problem when i run as non-root user.
    >
    >         I have all the files in the bin directory, as shared below,
    >
    >         -rwxrwxrwx. 1 shahid shahid 7604946 Jul  6 17:19 postgres
    >         lrwxrwxrwx. 1 shahid shahid       8 Jul  6 17:19
    postmaster ->
    >         postgres
    >         -rwxr-xr-x. 1 shahid shahid  908965 Jul  6 17:19 ecpg
    >         -rwxr-xr-x. 1 shahid shahid  128690 Jul  6 17:19 initdb
    >         -rwxr-xr-x. 1 shahid shahid   30548 Jul  6 17:19
    pg_archivecleanup
    >         -rwxr-xr-x. 1 shahid shahid  112608 Jul  6 17:19
    pg_basebackup
    >         -rwxr-xr-x. 1 shahid shahid   71241 Jul  6 17:19
    pg_receivewal
    >         -rwxr-xr-x. 1 shahid shahid   72771 Jul  6 17:19
    pg_recvlogical
    >         -rwxr-xr-x. 1 shahid shahid   30009 Jul  6 17:19 pg_config
    >         -rwxr-xr-x. 1 shahid shahid   39920 Jul  6 17:19
    pg_controldata
    >         -rwxr-xr-x. 1 shahid shahid   58438 Jul  6 17:19 pg_ctl
    >         -rwxr-xr-x. 1 shahid shahid  400623 Jul  6 17:19 pg_dump
    >         -rwxr-xr-x. 1 shahid shahid  164991 Jul  6 17:19 pg_restore
    >         -rwxr-xr-x. 1 shahid shahid   97686 Jul  6 17:19 pg_dumpall
    >         -rwxr-xr-x. 1 shahid shahid   49138 Jul  6 17:19 pg_resetwal
    >         -rwxr-xr-x. 1 shahid shahid   88205 Jul  6 17:19 pg_rewind
    >         -rwxr-xr-x. 1 shahid shahid   31798 Jul  6 17:19
    pg_test_fsync
    >         -rwxr-xr-x. 1 shahid shahid   26337 Jul  6 17:19
    pg_test_timing
    >         -rwxr-xr-x. 1 shahid shahid  130515 Jul  6 17:19 pg_upgrade
    >         -rwxr-xr-x. 1 shahid shahid   86270 Jul  6 17:19 pg_waldump
    >         -rwxr-xr-x. 1 shahid shahid  141273 Jul  6 17:19 pgbench
    >         -rwxr-xr-x. 1 shahid shahid  454216 Jul  6 17:19 psql
    >         -rwxr-xr-x. 1 shahid shahid   60635 Jul  6 17:19 createdb
    >         -rwxr-xr-x. 1 shahid shahid   56335 Jul  6 17:19 dropdb
    >         -rwxr-xr-x. 1 shahid shahid   64416 Jul  6 17:19 createuser
    >         -rwxr-xr-x. 1 shahid shahid   56305 Jul  6 17:19 dropuser
    >         -rwxr-xr-x. 1 shahid shahid   61135 Jul  6 17:19 clusterdb
    >         -rwxr-xr-x. 1 shahid shahid   68735 Jul  6 17:19 vacuumdb
    >         -rwxr-xr-x. 1 shahid shahid   64047 Jul  6 17:19 reindexdb
    >         -rwxr-xr-x. 1 shahid shahid   59104 Jul  6 17:19 pg_isready
    >
    >         Thanks
    >         Shahid
    >
    >
    >
    >
    >
    >         --
    >         Sent from:
    > http://www.postgresql-archive.org/PostgreSQL-admin-f2076596.html
    >
    >






[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux