Re: Performance difference between servers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There is a log of variables there.  Is the i7 single core performance faster than the E3? Bus/memory speeds, etc. I would also consider any vCPU imbalances.  You could end up with guest scheduling issue; i.e if guest requires 1 core but is allocated 4 cores; then for 4 cores still need to be available and ready to schedule the guest even if it current need is only 1 core at the moment.


On Nov 15, 2017, at 12:43 PM, kpi6288@xxxxxxxxx wrote:

Trying as best as a can: 
 
#1  HP 8200 Elite microtower, i7-2600, 16GB RAM, 1 SSD 480 GB, 1 SSD 900 GB, Hyper-V 2012 R2 (not 2008 R2 as written in my original question) 
#2  Lenovo TS 150, E3-1245 V5, 40GB RAM, 2 SSD 850GB as RAID 1 (BIOS level), 2 HDDs 1TB as RAID 1 (BIOS level)
#3  model unknown, E3-1270 V3, 32GB RAM, 2 SSD 480GB as RAID 1 (BIOS level)
 
Server #1 is more a PC than a server. 
 
Server #1 runs in total 4 virtual guests. 8GB and 6 „cores“ dedicated to the server running PostgreSQL and 3GB to other machines which are almost 100% idle.
Server #2 has currently on the one guets running PostgreSQL with 16GB RAM and 6 „cores“ dedicated. 
Server #3 runs 2 virtual guests. 12GB and 4 cores dedicated tot he guest runnning PostgreSQL. 4 GB and 3 cores decicated to another guest with is practically idle. 
 
Servers #2 and #3 have still plenty of free disk space while server #1 is using approx. 70% oft he disks. 
 
Server #1 has much older SSDs than #2. Not sure about #3. 
 
Von: Scott Whitney [mailto:scott@xxxxxxxxxxx] 
Gesendet: Mittwoch, 15. November 2017 18:19
An: kpi6288@xxxxxxxxx
Betreff: Re: Performance difference between servers
 
Can you post the hardware host specs for #1, #2 and #3? If those ARE the hardware specs (for example, you list SSDs), can you list the resources assigned to the guests?

 


From: kpi6288@xxxxxxxxx <kpi6288@xxxxxxxxx>
Sent: Wednesday, November 15, 2017 11:15 AM
To: Scott Whitney
Subject: AW: Performance difference between servers
 
Yes, exactly:
 
Three different (hardware) machines, each having a hyper-V host and the Windows Servers as Hyper-V guests. 
 
 
Von: Scott Whitney [mailto:scott@xxxxxxxxxxx] 
Gesendet: Mittwoch, 15. November 2017 18:11
An: kpi6288@xxxxxxxxx; pgsql-admin@xxxxxxxxxxxxxx
Betreff: Re: Performance difference between servers
 
Are you saying that each of these servers is a virtual HyperV machine running under a hardware host?
 
 

 


From: pgsql-admin-owner@xxxxxxxxxxxxxx <pgsql-admin-owner@xxxxxxxxxxxxxx> on behalf of kpi6288@xxxxxxxxx <kpi6288@xxxxxxxxx>
Sent: Wednesday, November 15, 2017 11:06 AM
To: pgsql-admin@xxxxxxxxxxxxxx
Subject:  Performance difference between servers 
 
We have 3 different servers, one (the oldest) ist significantly faster at certain operations and I can’t find out the reason: 
 
(table created in monospace font)
 
Server  Processor  RAM   CrystalDiskMark   pgbench   CREATE DATABASE   OS
  #1    i7-2600   8GB     495 / 473        26.000      4.5 … 6 s      W/ Server 2008 R2 on Hyper V Server 2008 
   #2    E3-1245   16GB    797 / 514        50.000      13 … 19 s      W/ Server 2016 Std. on Hyper V Server 2016
   #3    E3-1270   12GB    933 / 334        40.000      13 … 20 s      W/ Server 2008 Essentials on Hyper V Server 2016
 
CrystalDiskMark: „Seq Q32T1“
Pgbench: 
   pgbench -i -s 200 -U postgres pgbench
   pgbench -c 40 -j 10 -T 150 -U postgres -S -P 5 pgbench
CREATE DATABASE: 
   create database test with template myTemplate
 
All running PostgreSQL 9.6 x64 with similar configuration. All running as virtual machines, no other virtual machines creating any load. Using the same template database on all machines. 
 
Although the indicative numbers of pgbench and CrystalDiskMark show better values for server #2 and #3, server #1 creates a new database considerably faster. 
All servers have SSDs. Server #1 has two single SSDs (a system disk and a data disk). Servers #2 and #3 have only one logical disk for system and data, and this is two SSDs running as RAID 1. This may be slower but if it is, I would excpect this also to show up in the pgbench results. 
 
The reason behind this exercise is that a test application was also reported to be slower on server #2 and 3. 
 
Any idea how to track down the performance difference? 
 
Thank you 
Klaus
 
 
 
Journyx, Inc.
7600 Burnet Road #300 
Austin, TX 78757 
www.journyx.com
 
p 512.834.8888 
f 512-834-8858 
 
Do you receive our promotional emails? Click here or visit http://journyx.com/communication-preferences to unsubscribe.


[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux