also make sure you started postgesql with -i option, so you can connect from the lan Julioc. ---------------------------------------- > From: kmartens@xxxxxxxxx > To: pgsql-admin@xxxxxxxxxxxxxx > Subject: Re: pg_hba.conf is driving me nuts > Date: Sat, 15 Dec 2007 13:39:44 +0200 > > Hi..yes, I have set the "listen_addresses" to "*"...rather an obvious first > stop...As I said - I have no problems connecting locally, or on a LAN - no > sweat at all. Simply cannot get the connection to work from another network > over a WAN. I believe the problem stems from my not setting pg_hba.conf > correctly, but I would love to test this! > This is my pg_hba.conf file from my developement box: > > # TYPE DATABASE USER CIDR-ADDRESS METHOD > # IPv4 local connections: > host all all 127.0.0.1/32 md5 > # IPv6 local connections: > host all all 10.0.0.0/24 md5 > host all all 0.0.0.0 0.0.0.0 md5 > > At one stage, I even looked up the source ip address reported by aports when > I was logged onto the machine remotely..even that address did not work. So I > figure there is a problem with the subnet mask (don't realy understand the > address masks all that well - I am a programmer, not a network tekkie, so it > is kind of new territory for me). What I was wondering is if there was some > way to allow any host to connect, regardless of ip and subnet which was the > behaviour I expected from the 0.0.0.0 0.0.0.0 setting - of course it did > absolutely nothing. > > > ---------------------------(end of broadcast)--------------------------- > TIP 3: Have you checked our extensive FAQ? > > http://www.postgresql.org/docs/faq ---------------------------(end of broadcast)--------------------------- TIP 2: Don't 'kill -9' the postmaster
