Re: Locallhost Windows installation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Your Windows user account information will not be useful in Postgres.

When you install it, it will ask you for two accounts:

 

1 is the service account (the machine account which Postgres runs under)

The other is the PostgreSQL super user.  Until you set up other user accounts, you will only be able to use the postgresql super-user you specify when you install Postgres.

 

Then you do:

 

Createdb –h localhost –U <PG super-user> -W <dbname>

 

The –U tells it to connect as that username, -W tells it to prompt for the user’s password.


You need the JDBC (I believe) connector to install on the client machines, or the ODBC connector (depending on what your java app uses.)  You only need to install PostgreSQL itself on the server.

 

Andy

 


From: System Consult [mailto:systemconsult@xxxxxxxxx]
Sent: 09 May 2006 2:02 pm
To: andy.shellam@xxxxxxxxxxxxxxxxx
Subject: Re: [ADMIN] Locallhost Windows installation

 

this has been installed successfully. the new problem is

C:\Program Files\PostgreSQL\8.1\bin>createdb HtlMgmtDB
Password:
createdb: could not connect to database postgres: FATAL:  password authenticatio
n failed for user "afolorunsho"

 

afolorunsho is the user that signed on windows operating system. this was the same person who installed the dbase, hence authorised user. i went through the documentation and the explanation there are not specific. What have i done wrong? what have i not done? any help will be appreciated pls.

 

another question do i have to go through all these in order to install on a client machine, especially where the only use for it is to connect through a java application as a database.

 



 

On 09/05/06, Andy Shellam <andy.shellam@xxxxxxxxxxxxxxxxx> wrote:

> however, now that i have installed not as a service, how do i correct it?

 

If this is a new installation and you've not loaded any data yet, I'd say the easiest way would be to uninstall and re-install it again (it would also give you chance to double-check where the data directory is for reference, although you don't particularly need to know this (except maybe for file-system-level backups.)

 

> since i intend to use this with java applications which are going to be distributed, does one need to activate the server in order to access the database too or one can access the database directly.

 

All SQL transactions go through the PostgreSQL server – on Windows this is using an ODBC / OLE DB driver.  You will never be able to read the data out of the flat files, so yes you need PostgreSQL to be running to access it (hence the best approach is to leave the service to start automatically, so if the server reboots, PostgreSQL will be already running again.)

 

All connections go through port 5432 (the default) so make sure this is opened up on your firewall (on Windows 2003 R2 or XP SP2 don't forget to check the Windows Firewall.)

 

If your Java apps accessing PostgreSQL go through TCP/IP (i.e. they sit on client machines on a LAN and talk back to the server), you will need to edit your pg_hba.conf file (access through the Start menu > Programs > PostgreSQL).  And add a line like (under # IPv4…)

 

host      user      database          192.168.1.0/24   md5

 

Replace "user" with your Java apps connection user (or you can set it to "all" to allow any user access)

Replace "database" with the database name of your app (or you can set it to "all" to allow any access to any database)

Replace 192.168.1.0/24 with your network's IP range (or if you don't want to restrict to any particular network, use 0.0.0.0/0.)

 

Md5 is the authentication method – you can set to "trust" instead of md5 to allow any connection without a password being required (this should be restricted to the localhost ( 127.0.0.1/32) only, or at worst, your local network for obvious security reasons).  However md5 states that a valid password must be required to connect.  I believe you can use crypt as well.

 

Well done on choosing PostgreSQL!  I'm sure when you get up and running to know the system you'll be glad of the choice you made.

 

Andy


PS.  Don't forget to CC the mailing list into your responses so others can follow the conversation.

 

 

 


From: System Consult [mailto: systemconsult@xxxxxxxxx]
Sent: 09 May 2006 12:27 pm
To: andy.shellam@xxxxxxxxxxxxxxxxx
Subject: Re: [ADMIN] Locallhost Windows installation

 

thanks a million for this enlightenment. however, now that i have installed not as a service, how do i correct it? then, since i intend to use this with java applications which are going to be distributed, does one need to activate the server in order to access the database too or one can access the database directly.

 

thanks upfront

 

On 09/05/06, Andy Shellam < andy.shellam@xxxxxxxxxxxxxxxxx> wrote:

You should ideally install it as a Windows service.  You can restrict access to the server using the pg_hba.conf to the local machine only so other network machines cannot connect.  The windows service means that PostgreSQL can be controlled automatically at startup, rather than have to be started manually.

 

You define the data directory in the MSI installer (although I believe this is my default under C:\Program Files\PostgreSQL\Data.)

 

To use the database, you need a management program, such as PgAdmin III – this ships with the MSI installer, if you install this at the same time as you install Postgres, it'll add a connection to PgAdmin for the local server.

 

The latest version manual can be found on the documentation website – that'll give you any information you need regarding config files etc.

 

Andy

 


From: pgsql-admin-owner@xxxxxxxxxxxxxx [mailto:pgsql-admin-owner@xxxxxxxxxxxxxx] On Behalf Of System Consult
Sent: 09 May 2006 10:47 am
To: pgsql-admin@xxxxxxxxxxxxxx
Subject: [ADMIN] Locallhost Windows installation

 

Im a new user, having read so much about the database.

 

i installed the binary version successfuly on windows. I did not install as a service, as all access have to be through the local host, via a program(java). Now how do i create the database at a specified directory and start using this.  

 

kind and urgent assistance required

 

 


!DSPAM:14,446092e034491113668720!


[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux