Host all all 127.0.0.1/32 md5 This entry is there in configuration file already.So no probs..I can connect. But..Just i want to know why it is connecting if i mention just localhost and why it giving error if i mention the IP of it(the same m/c's) instead of local host. Have u seen the image i sent in last mail? What is wrong if i mention the localhost IP instead of localhost in my connection information? ----- Original Message ----- From: "Andy Shellam" <andy.shellam@xxxxxxxxxxxxxxxxx> To: "'sandhya'" <sandhyar@xxxxxxxxxxxxxx> Cc: <pgsql-admin@xxxxxxxxxxxxxx> Sent: Monday, March 20, 2006 3:48 PM Subject: RE: [ADMIN] reg:conninfo > You should be able to connect if you tell your application to connect to > 127.0.0.1, and put > > Host all all 127.0.0.1/32 md5 > > In your pg_hba.conf file - this is a system default loopback IP for clients > on the same machine. > > Why is it causing you such a problem using localhost as opposed to an IP > address? Using localhost (or 127.0.0.1) saves you a slight network overhead > than connecting on your network interface's IP. > > Andy > > -----Original Message----- > From: sandhya [mailto:sandhyar@xxxxxxxxxxxxxx] > Sent: Monday, 20 March, 2006 10:13 AM > To: andy.shellam@xxxxxxxxxxxxxxxxx > Cc: Postgres > Subject: Re: [ADMIN] reg:conninfo > > Hi Andy..... > You r right.Just i mentioned all these as examples. > I want to connect with the localsystem where the server is running. > But in my VC application if i mention in connection info host as localhost > it is working fine. > But the same if i give my localsystem IP it is showing the following error. > Why it is working fine in case of local host and why not incase of IP > address. > I have mentioned the IP in pg_hba.conf and reloaded it. > > > > Please tell me, > > Thank you, > Sandhya R > > > ----- Original Message ----- > From: "Andy Shellam" <andy.shellam@xxxxxxxxxxxxxxxxx> > To: "'sandhya'" <sandhyar@xxxxxxxxxxxxxx> > Cc: <pgsql-admin@xxxxxxxxxxxxxx> > Sent: Monday, March 20, 2006 3:22 PM > Subject: RE: [ADMIN] reg:conninfo > > > > Sandhya, > > > > You have mentioned 3 different IP addresses for your server in this topic > so > > far. > > > > Your pg_hba.conf entry says "10.0.3.67/32" - which means only that IP can > > connect - the IP address/range in pg_hba.conf should be your client IP (if > > this is on the same server as PGSQL, the best way is to use 127.0.0.1 (the > > system default localhost IP)). > > > > Your application appears to be trying to connect to 10.0.0.205, which is > > different to the one you've just said your server is 10.0.2.56. > > > > Do an "ifconfig" on the console and find out what network adapters there > are > > in your server, and what IPs they're bound to - then in your > postgresql.conf > > bind PostgreSQL to one of them (if you have multiple adapters) (using the > > listen_address=... option - then you can use that IP to specify as the > > connection IP in your application. > > > > But you need to get some consistency in the IPs your server is listening > on, > > and your application is trying to connect to. > > > > Andy > > > > -----Original Message----- > > From: pgsql-admin-owner@xxxxxxxxxxxxxx > > [mailto:pgsql-admin-owner@xxxxxxxxxxxxxx] On Behalf Of sandhya > > Sent: Monday, 20 March, 2006 9:49 AM > > To: Robin Iddon > > Cc: Postgres > > Subject: Re: [ADMIN] reg:conninfo > > > > Thanks Robin. > > What u said is right! > > But my problem is i am not trying connecting from any remote client. > > > > In my ConnectionInfo if i mention the host as, > > host=localhost.The connection is successful. > > > > But the same if i give my localsystem IP where my server is running.. > > host = 10.0.2.56(my localhost IP). > > The Connection is failed. > > Why is this so?Whether i need to give only localhost in my application > (or) > > why it is not accepting when i gave IP of the same system(When the entry > of > > this IP is already present in pg_hba.conf file)? > > > > > > ----- Original Message ----- > > From: "Robin Iddon" <robin@xxxxxxxxxx> > > To: "sandhya" <sandhyar@xxxxxxxxxxxxxx> > > Cc: "Postgres" <pgsql-admin@xxxxxxxxxxxxxx> > > Sent: Monday, March 20, 2006 2:28 PM > > Subject: Re: [ADMIN] reg:conninfo > > > > > > > Try looking at the manual for the postmaster process ... > > > > > > A simple way of achieving what you want is adding the -i option to the > > > postmaster command line which allows TCP/IP connections. Otherwise only > > > localhost can connect. > > > > > > There are possibly other ways of configuring this same option, but we > > > use the -i on the command line to the postmaster process. > > > > > > Hope this helps, > > > > > > Robin > > > > > > sandhya wrote: > > > > > > >hi, > > > > > > > > I am using postgres8.0.3 on windows.When i am compiling a small > sample > > i am facing problem in connection information. > > > > > > > >I have given entry in my pg_hba.conf file: > > > >host all all 10.0.3.67/32 > > md5 > > > > > > > >And in my application when i pass host in conninfo as, > > > >host=10.0.3.67...It is not connecting..and throwing error like, > > > >Is server running on 10.0.0.205..etc > > > >But when i give as, > > > >host=localhost..It is running fine. > > > >After each change i am doing pg_reload. > > > >What i need to do inorder to mention the IP in my application instead > of > > localhost? > > > >Please tell me. > > > > > > > >Thank you, > > > >Sandhya > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------(end of broadcast)--------------------------- > > TIP 2: Don't 'kill -9' the postmaster > > > > > > > > > > > > > !DSPAM:14,441e7eaf49417887321075! >
