Re: OpenSSL 3.0 FIPS questions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 28/10/2021 18:33, Jason Schultz wrote:
Thanks Matt. I think I have what I need as far as loading providers. I also did the test you suggested with EVP_MD_fetch() and things failed as expected, the fetch did not work.

One other question on providers, given how I load everything, it seems like before application exit, the cleanup should be the following:

     OSSL_LIB_CTX_free(fips_libctx);
     OSSL_LIB_CTX_free(non_fips_libctx);
     OSSL_PROVIDER_unload(defp);

Yes, but I would recommend unloading the default provider before freeing the libctx it is associated with. Otherwise bad things might happen.


Since I didn't "explicitly" load the fips and base providers with API calls, I only need to unlead the default provider, as well as free both library contexts.

Correct.


Also, when I did try to unload the fips and base providers, the call to OSSL_PROVIDER_unload() hung, with the following backtrace:

Yeah. Don't do that. :-)

Matt


#1  0x00007fb37f51d709 in CRYPTO_THREAD_read_lock () from /lib64/libcrypto.so.3 #2  0x00007fb37f50c068 in ossl_lib_ctx_get_data () from /lib64/libcrypto.so.3
#3  0x00007fb37f519482 in get_provider_store () from /lib64/libcrypto.so.3
#4  0x00007fb37f519af9 in provider_deactivate () from /lib64/libcrypto.so.3
#5  0x00007fb37f51b813 in ossl_provider_deactivate () from /lib64/libcrypto.so.3
#6  0x00007fb37f518399 in OSSL_PROVIDER_unload () from /lib64/libcrypto.so.3

Thanks,

Jason


------------------------------------------------------------------------
*From:* Matt Caswell <matt@xxxxxxxxxxx>
*Sent:* Thursday, October 28, 2021 2:00 PM
*To:* Jason Schultz <jetson23@xxxxxxxxxxx>; Dr Paul Dale <pauli@xxxxxxxxxxx>; openssl-users@xxxxxxxxxxx <openssl-users@xxxxxxxxxxx>
*Subject:* Re: OpenSSL 3.0 FIPS questions


On 28/10/2021 14:49, Jason Schultz wrote:
A call to OSSL_PROVIDER_available() says the "default" provider is available;  however, I'm wondering if I should be loading the default provider via *load_config() as well? I would have to uncomment the "activate = 1" in the default section of my config though.

This is entirely a matter of personal taste. It makes no difference
functionally whether you load a provider via OSSL_PROVIDER_load()
directly, or whether you do it via the config file. Obviously if you do
it via a config file it gives you the ability to modify what providers
get loaded later without having to recompile.

If you decided to do it via config then you probably want *2* different
config files. One for the fips libctx and one for the non-fips libctx.



I also still have this in my code:

      /* Disallow falling back to the default library context */
      nullp = OSSL_PROVIDER_load(NULL, "null");

But not sure it's having any affect?

You could attempt to test it by attempting to fetch an algorithm. We
would expect it to fail if it is working as expected. E.g.

EVP_MD *md = EVP_MD_fetch(NULL, "SHA2-256", NULL);
if (md != NULL) {
      /* Should not happen! The null provider should prevent this */
}



I do know that later in my application, both in "FIPS" or "non-FIPS" mode, I can  create an SSL_CTX with SSL_CTX_new_ex(). I also successfully call several APIs using both the fips_libctx or the non_fips_libctx, for example:

status = SSL_CTX_use_PrivateKey_file(ctx,<file>,SSL_FILETYPE_PEM);

status = SSL_CTX_use_certificate_file(ctx,<file>,SSL_FILETYPE_PEM);

status = SSL_CTX_check_private_key(ctx);


All return successfully. So I think what I have between configuration files and API calls accomplishes what I need to. Would anyone reading this agree?

It sounds correct from what you have described.

Matt


I'm running into another issue that I need to troubleshoot a bit more before I add too much information and too many questions to a single message.

Thanks to everyone for their help with this, things are starting to make more sense now.



------------------------------------------------------------------------
*From:* Matt Caswell <matt@xxxxxxxxxxx>
*Sent:* Thursday, October 28, 2021 7:39 AM
*To:* Jason Schultz <jetson23@xxxxxxxxxxx>; Dr Paul Dale <pauli@xxxxxxxxxxx>; openssl-users@xxxxxxxxxxx <openssl-users@xxxxxxxxxxx>
*Subject:* Re: OpenSSL 3.0 FIPS questions


On 27/10/2021 17:28, Jason Schultz wrote:
With these config files and the code above, the OSSL_PROVIDER_load(fips_libctx, "fips") call fails. Here are the messages from the ERR_print_errors_fp() call:

2097C692B57F0000:error:1C8000D5:Provider routines:(unknown function):missing config data:providers/fips/self_test.c:289: 2097C692B57F0000:error:1C8000E0:Provider routines:(unknown function):fips module entering error state:providers/fips/self_test.c:387: 2097C692B57F0000:error:1C8000D8:Provider routines:(unknown function):self test post failure:providers/fips/fipsprov.c:706: 2097C692B57F0000:error:078C0105:common libcrypto routines:(unknown function):init fail:crypto/provider_core.c:903:name=fips


This tells us that the fips provider has successfully loaded, but then
subsequently failed during its self-test because it cannot find its
config data.

I can see that you have created a separate libctx for fips. However
automatic loading of the config file only works for the *default*
libctx. If you create your own one then you need to explicitly load the
config file:

if (!OSSL_LIB_CTX_load_config(fips_libtx, "/usr/local/ssl/openssl.cnf")) {
       /* error handling */
}

Actually if you do this then you should not need to call
OSSL_PROVIDER_load() explicitly to load the fips provider since you
already activated it in the config file. You can either drop the
explicit call to OSSL_PROVIDER_load() for the fips provider, or remove
the "activate = 1" line in "fips_sect" in fipsmodule.cnf. This is just a
minor optimisation though. Doing both is redundant but harmless. You
could also load the base provider via config if you wanted to.

Matt





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux