RE: How to disable tls 1.0 and tls 1.1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



>Please note that curl developers have recently changed the meaning of those options, please check if they do what you expect them to do by inspecting the curl man page.
Thanks for the information. I understood it.
I also used openssl s_client to communicate with server using below command.
openssl s_client -connect 172.28.80.66:8080 -tls1_1
It says " unknown option -tls1_1"
Same for -tls1.

And even if I disable TLSv1.2 and execute  
openssl s_client -connect 172.28.80.66:8080 -no_tls1_2
WARNING: can't open config file: /usr/local/ebx/ssl/openssl.cnf
CONNECTED(00000003)
2001716872:error:140790E5:SSL routines:ssl23_write:ssl handshake failure:s23_lib.c:177:
---
no peer certificate available
---
No client certificate CA names sent
---
SSL handshake has read 0 bytes and written 113 bytes
---
New, (NONE), Cipher is (NONE)
Secure Renegotiation IS NOT supported
Compression: NONE
Expansion: NONE
No ALPN negotiated
SSL-Session:
    Protocol  : TLSv1.2
    Cipher    : 0000
    Session-ID:
    Session-ID-ctx:
    Master-Key:
    Key-Arg   : None
    PSK identity: None
    PSK identity hint: None
    SRP username: None
    Start Time: 1555075165
    Timeout   : 300 (sec)
    Verify return code: 0 (ok)
--- 

>what you mean by "used them in Makefile", I'm talking about configure script
I added these options in Makefile like,
CONFOPTS += linux-ppc -DOPENSSL_NO_SSL3 -DOPENSSL_NO_SSL2 -DSSL_OP_NO_SSLv2 no-tls1 no-tls1_1 no-tls1-method no-tls1_1-method

> do adding `no-tls1-method` and `no-tls1_1-method` produce the expected result?
Yes, even after adding these options it produces the same result.

I am confused what is the problem.
Let me know if there is any other way to disable TLSv1.0 and TLS1.1


Thanks in advance,
Chethan Kumar
-----Original Message-----
From: Hubert Kario [mailto:hkario@xxxxxxxxxx] 
Sent: Friday, April 12, 2019 6:11 PM
To: Chethan Kumar <Chethan.Kumar@xxxxxxxxxxxxxxxx>
Cc: openssl-users@xxxxxxxxxxx
Subject: Re: How to disable tls 1.0 and tls 1.1

On Friday, 12 April 2019 13:54:24 CEST Chethan Kumar wrote:
> >what evidence you have that what you do is ineffective?
> 
> I tried connecting to some host by executing curl command with 
> --tlsv1.1 and
> --tlsv1.0 options and am able to connect successfully.

Please note that curl developers have recently changed the meaning of those options, please check if they do what you expect them to do by inspecting the curl man page.

see: https://github.com/curl/curl/issues/2918

> >why you're not using?
> >./config no-tls1 no-tls1_1
> 
> I have used these options in Makefile but still communication with 
> TLS1.0 and TLS1.1 is working.

what you mean by "used them in Makefile", I'm talking about configure script

> Confirmed by checking openssl/opensslconf.h file for OPENSSL_NO_TLS1 
> and OPENSSL_NO_TLS1_1 macros and macros are generated.
> Kindly let me know what could be changed to disable TLS 1.0 and 1.1 at 
> least by changing code in openssl.

macros may still be generated because the API is retained for ABI compatibility, do adding `no-tls1-method` and `no-tls1_1-method` produce the expected result?
 
> -----Original Message-----
> From: Hubert Kario [mailto:hkario@xxxxxxxxxx]
> Sent: Friday, April 12, 2019 4:50 PM
> To: Chethan Kumar <Chethan.Kumar@xxxxxxxxxxxxxxxx>
> Cc: openssl-users@xxxxxxxxxxx
> Subject: Re: How to disable tls 1.0 and tls 1.1
> 
> On Friday, 12 April 2019 06:47:54 CEST Chethan Kumar wrote:
> 
> > > there is no "min" version in Client Hello, the version in record 
> > > layer is irrelevant and used only for backwards compatibility 
> > > *NOT* for negotiation
> > 
> > Thank you for the information. But have a doubt, then what is the 
> > importance of SSL_CTX_set_min_proto_version() and
> > SSL_CTX_set_max_proto_version() introduced in 1.1.X along with 
> > SSL_CTX_set_options().
> 
> when the minimum set is higher than what the server answers with, the
> *client* will reject the connection after receiving ServerHello
 
> that is:
> when SSL_CTX_set_min_proto_version is set to tls 1.2, 
> SSL_CTX_set_max_proto_version si set to tls 1.3 and the server replies 
> with ServerHello.version of (3, 2) i.e. TLS 1.1 the client will abort 
> the connection
 
> 
> > I would like to know how to disable TLSv1.0 and 1.1 using configure 
> > option[CONFOPTS] in Makefile.
> 
> 
> what evidence you have that what you do is ineffective? 
> 
> why you're not using?
> ./config no-tls1 no-tls1_1
> 
> 
> > Thanks in advance,
> > Chethan Kumar
> > 
> > 
> > -----Original Message-----
> > From: Hubert Kario [mailto:hkario@xxxxxxxxxx]
> > Sent: Thursday, April 11, 2019 7:08 PM
> > To: openssl-users@xxxxxxxxxxx
> > Cc: Chethan Kumar <Chethan.Kumar@xxxxxxxxxxxxxxxx>
> > Subject: Re: How to disable tls 1.0 and tls 1.1
> > 
> > On Thursday, 11 April 2019 15:25:51 CEST Chethan Kumar wrote:
> > 
> > 
> > > Adding to previous mail,
> > > We tried -DSSL_OP_NO_TLSv1   -DSSL_OP_NO_TLSv1_1  along with disabling
> > > SSLv2
> 
>  and v1 but still client hello is sent using min and max as TLS1.0
> 
> > > and TLS1.2.
> > 
> > 
> > 
> > there is no "min" version in Client Hello, the version in record 
> > layer is irrelevant and used only for backwards compatibility *NOT* 
> > for negotiation
> > 
> > 
> > 
> > > Any idea what is wrong in our options and what should be used instead.?
> > 
> > 
> > 
> > compile an openssl server with TLS 1.1 enabled, run openssl s_server
> > -tls1_1 to enable just TLS 1.1 and see if your production compile 
> > can connect
> 
>  
> 
> > 
> > 
> > > Thanks in advance,
> > > Chethan Kumar
> > > 
> > > From: openssl-users [mailto:openssl-users-bounces@xxxxxxxxxxx] On 
> > > Behalf Of Chethan Kumar Sent: Thursday, April 11, 2019 4:25 PM
> > > To: openssl-users@xxxxxxxxxxx
> > > Subject: How to disable tls 1.0 and tls 1.1
> > > 
> > > Dear all,
> > > 
> > > Kindly help me out in knowing how to disable TLS1.0 and TLS1.1 
> > > while compiling openssl package. I am using 1.0.2n openssl version 
> > > and disabled
> > > SSLv1 and v2 using -DSSL_OP_NO_SSLv2, -DOPENSSL_NO_SSL3 and 
> > > -DOPENSSL_NO_SSL2.
> > > 
> > > I also have a doubt on difference between -DSSL_OP_NO_SSLv2,
> > > -DOPENSSL_NO_SSL3 and -DOPENSSL_NO_SSL2. Can someone please 
> > > explain the difference.
> > > 
> > > Thanks in advance,
> > > Chethan Kumar
> > > 
> > > 
> > > The information contained in this e-mail message and in any 
> > > attachments/annexure/appendices is confidential to the recipient 
> > > and may contain privileged information. If you are not the 
> > > intended recipient, please notify the sender and delete the 
> > > message along with any attachments/annexure/appendices. You should 
> > > not disclose, copy or otherwise use the information contained in 
> > > the message or any annexure. Any views expressed in this e-mail 
> > > are those of the individual sender except where the sender 
> > > specifically states them to be the views of Toshiba Software India Pvt. Ltd. (TSIP),Bangalore.
> > > Although this transmission and any attachments are believed to be 
> > > free of any virus or other defect that might affect any computer 
> > > system into which it is received and opened, it is the 
> > > responsibility of the recipient to ensure that it is virus free 
> > > and no responsibility is accepted by Toshiba Software India Pvt. 
> > > Ltd, for any loss or damage arising in any way from its use. The 
> > > information contained in this e-mail message and in any 
> > > attachments/annexure/appendices is confidential to the recipient 
> > > and may contain privileged information.
 If you are not the intended recipient,
> > > please notify the sender and delete the message along with any 
> > > attachments/annexure/appendices. You should not disclose, copy or 
> > > otherwise use the information contained in the message or any 
> > > annexure. Any views expressed in this e-mail are those of the 
> > > individual sender except where the sender specifically states them 
> > > to be the views of Toshiba Software India Pvt. Ltd.
 (TSIP),Bangalore.
> > > 
> > > Although this transmission and any attachments are believed to be 
> > > free of any virus or other defect that might affect any computer 
> > > system into which it is received and opened, it is the 
> > > responsibility of the recipient to ensure that it is virus free 
> > > and no responsibility is accepted by Toshiba Embedded Software 
> > > India Pvt. Ltd, for any loss or damage arising in any way from its use.
> > 
> > 
> > 
> > 
> > --
> > Regards,
> > Hubert Kario
> > Senior Quality Engineer, QE BaseOS Security team
> > Web: www.cz.redhat.com
> > Red Hat Czech s.r.o., Purkyňova 115, 612 00  Brno, Czech Republic 
> > The information contained in this e-mail message and in any 
> > attachments/annexure/appendices is confidential to the recipient and 
> > may contain privileged information.
> > If you are not the intended recipient, please notify the sender and 
> > delete the message along with any attachments/annexure/appendices. 
> > You should not disclose, copy or otherwise use the information 
> > contained in the message or any annexure. Any views expressed in 
> > this e-mail are those of the individual sender except where the 
> > sender specifically states them to be the views of Toshiba Software India Pvt. Ltd.
> > (TSIP),Bangalore.
> > 
> > Although this transmission and any attachments are believed to be 
> > free of any virus or other defect that might affect any computer 
> > system into which it is received and opened, it is the 
> > responsibility of the recipient to ensure that it is virus free and 
> > no responsibility is accepted by Toshiba Embedded Software India 
> > Pvt. Ltd, for any loss or damage arising in any way from its use.
> 
> 
> 
> --
> Regards,
> Hubert Kario
> Senior Quality Engineer, QE BaseOS Security team
> Web: www.cz.redhat.com
> Red Hat Czech s.r.o., Purkyňova 115, 612 00  Brno, Czech Republic The 
> information contained in this e-mail message and in any 
> attachments/annexure/appendices is confidential to the recipient and 
> may contain privileged information.
> If you are not the intended recipient, please notify the sender and 
> delete the message along with any attachments/annexure/appendices. You 
> should not disclose, copy or otherwise use the information contained 
> in the message or any annexure. Any views expressed in this e-mail are 
> those of the individual sender except where the sender specifically 
> states them to be the views of Toshiba Software India Pvt. Ltd. 
> (TSIP),Bangalore.
> 
> Although this transmission and any attachments are believed to be free 
> of any virus or other defect that might affect any computer system 
> into which it is received and opened, it is the responsibility of the 
> recipient to ensure that it is virus free and no responsibility is 
> accepted by Toshiba Embedded Software India Pvt. Ltd, for any loss or 
> damage arising in any way from its use.


--
Regards,
Hubert Kario
Senior Quality Engineer, QE BaseOS Security team
Web: www.cz.redhat.com
Red Hat Czech s.r.o., Purkyňova 115, 612 00  Brno, Czech Republic
The information contained in this e-mail message and in any
attachments/annexure/appendices is confidential to the 
recipient and may contain privileged information. 
If you are not the intended recipient, please notify the
sender and delete the message along with any 
attachments/annexure/appendices. You should not disclose,
copy or otherwise use the information contained in the
message or any annexure. Any views expressed in this e-mail 
are those of the individual sender except where the sender 
specifically states them to be the views of 
Toshiba Software India Pvt. Ltd. (TSIP),Bangalore.

Although this transmission and any attachments are believed to be
free of any virus or other defect that might affect any computer 
system into which it is received and opened, it is the responsibility
of the recipient to ensure that it is virus free and no responsibility 
is accepted by Toshiba Embedded Software India Pvt. Ltd, for any loss or
damage arising in any way from its use.




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux