On 10/01/2017 05:04, jeff saremi wrote:
Hello
I downloaded openssl-1.1.0c and i'm trying to build this on Windows 10
using Visual Studio 2015. I'm following the INSTALL and NOTES.WIN
instructions however I get stopped rather quickly with file not found
issues..
I have also installed nasm. The build fails for 32 or 64 with slightly
different paths in the error. Here's the sequence of commands:
1.perl Configure VC-WIN32
2.nmake
output:
D:\repos\openssl-1.1.0c>perl Configure VC-WIN64A
Configuring OpenSSL version 1.1.0c (0x1010003fL)
no-asan [default] OPENSSL_NO_ASAN
no-crypto-mdebug [default] OPENSSL_NO_CRYPTO_MDEBUG
no-crypto-mdebug-backtrace [default]
OPENSSL_NO_CRYPTO_MDEBUG_BACKTRACE
no-ec_nistp_64_gcc_128 [default] OPENSSL_NO_EC_NISTP_64_GCC_128
no-egd [default] OPENSSL_NO_EGD
no-fuzz-afl [default] OPENSSL_NO_FUZZ_AFL
no-fuzz-libfuzzer [default] OPENSSL_NO_FUZZ_LIBFUZZER
no-heartbeats [default] OPENSSL_NO_HEARTBEATS
no-md2 [default] OPENSSL_NO_MD2 (skip dir)
no-msan [default] OPENSSL_NO_MSAN
no-rc5 [default] OPENSSL_NO_RC5 (skip dir)
no-sctp [default] OPENSSL_NO_SCTP
no-ssl-trace [default] OPENSSL_NO_SSL_TRACE
no-ssl3 [default] OPENSSL_NO_SSL3
no-ssl3-method [default] OPENSSL_NO_SSL3_METHOD
no-ubsan [default] OPENSSL_NO_UBSAN
no-unit-test [default] OPENSSL_NO_UNIT_TEST
no-weak-ssl-ciphers [default] OPENSSL_NO_WEAK_SSL_CIPHERS
no-zlib [default]
no-zlib-dynamic [default]
Configuring for VC-WIN64A
CC =cl
CFLAG =-W3 -wd4090 -Gs0 -GF -Gy -nologo -DOPENSSL_SYS_WIN32
-DWIN32_LEAN_AND_MEAN -DL_ENDIAN -D_CRT_SECURE_NO_DEPRECATE -DUNICODE
-D_UNICODE /MD /O2
SHARED_CFLAG =
DEFINES =OPENSSL_USE_APPLINK DSO_WIN32 NDEBUG OPENSSL_THREADS
OPENSSL_NO_STATIC_ENGINE OPENSSL_PIC OPENSSL_IA32_SSE2
OPENSSL_BN_ASM_MONT OPENSSL_BN_ASM_MONT5 OPENSSL_BN_ASM_GF2m SHA1_ASM
SHA256_ASM SHA512_ASM RC4_ASM MD5_ASM AES_ASM VPAES_ASM BSAES_ASM
GHASH_ASM ECP_NISTZ256_ASM POLY1305_ASM
LFLAG =/nologo /debug
PLIB_LFLAG =
EX_LIBS =ws2_32.lib gdi32.lib advapi32.lib crypt32.lib user32.lib
APPS_OBJ =win32_init.o ../ms/applink.o
CPUID_OBJ =x86_64cpuid.o
UPLINK_OBJ =../ms/uplink.o uplink-x86_64.o
BN_ASM =bn_asm.o x86_64-mont.o x86_64-mont5.o x86_64-gf2m.o
rsaz_exp.o rsaz-x86_64.o rsaz-avx2.o
EC_ASM =ecp_nistz256.o ecp_nistz256-x86_64.o
DES_ENC =des_enc.o fcrypt_b.o
AES_ENC =aes-x86_64.o vpaes-x86_64.o bsaes-x86_64.o
aesni-x86_64.o aesni-sha1-x86_64.o aesni-sha256-x86_64.o aesni-mb-x86_64.o
BF_ENC =bf_enc.o
CAST_ENC =c_enc.o
RC4_ENC =rc4-x86_64.o rc4-md5-x86_64.o
RC5_ENC =rc5_enc.o
MD5_OBJ_ASM =md5-x86_64.o
SHA1_OBJ_ASM =sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o
sha1-mb-x86_64.o sha256-mb-x86_64.o
RMD160_OBJ_ASM=
CMLL_ENC =cmll-x86_64.o cmll_misc.o
MODES_OBJ =ghash-x86_64.o aesni-gcm-x86_64.o
PADLOCK_OBJ =e_padlock-x86_64.o
CHACHA_ENC =chacha-x86_64.o
POLY1305_OBJ =poly1305-x86_64.o
BLAKE2_OBJ =
PROCESSOR =
RANLIB =true
ARFLAGS =/nologo
PERL =perl
SIXTY_FOUR_BIT mode
Configured for VC-WIN64A.
D:\repos\openssl-1.1.0c>nmake
Microsoft (R) Program Maintenance Utility Version 14.00.24210.0
Copyright (C) Microsoft Corporation. All rights reserved.
"perl" "-I." -Mconfigdata "util/dofile.pl" "-omakefile"
"crypto/include/internal/bn_conf.h.in" > crypto/include/internal/bn_conf.h
"perl" "-I." -Mconfigdata "util/dofile.pl" "-omakefile"
"crypto/include/internal/dso_conf.h.in" >
crypto/include/internal/dso_conf.h
"perl" "-I." -Mconfigdata "util/dofile.pl" "-omakefile"
"include/openssl/opensslconf.h.in" > include/openssl/opensslconf.h
set ASM=nasm
"perl" "crypto/aes/asm/aes-x86_64.pl" "auto"
crypto/aes/aes-x86_64.asm
nasm -f win64 -DNEAR -Ox -g -ocrypto/aes/aes-x86_64.obj
"crypto/aes/aes-x86_64.asm"
nasm: fatal: unable to open input file `crypto/aes/aes-x86_64.asm'
NMAKE : fatal error U1077: 'C:\nasm-2.12.02\nasm.EXE' : return code '0x1'
Stop.
Check your perl version, with the command perl -V
Enjoy
Jakob
--
Jakob Bohm, CIO, Partner, WiseMo A/S. https://www.wisemo.com
Transformervej 29, 2860 Søborg, Denmark. Direct +45 31 13 16 10
This public discussion message is non-binding and may contain errors.
WiseMo - Remote Service Management for PCs, Phones and Embedded
--
openssl-users mailing list
To unsubscribe: https://mta.openssl.org/mailman/listinfo/openssl-users
