OpenSSL 1.0.2h reports speed test results as 0 secs and Infk ops/sec

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/11/2016 03:44 PM, Jeff Wieland wrote:
> I see the same thing on Sun Blade 150 (650Mhz), with OpenSSL 1.0.2h
> compiled with Studio 12.2 -- and with a Sun Fire V100 (550Mhz).
>
> It works correctly on a Sun Fire V240 (1.5Ghz), a Sun Ultra 10 (440Mhz),
> a Sun Fire T1000, and Sun Enterprise M3000.
>
> I see these results with both 32 bit and 64 bit builds.
>
> It looks like you're building and running this on an UltraSPARC 2e
> architecture system -- this is what the SB150 and the V100 are.

Hrmmm .. not sure what that means. Given that I run Configure with the
"no-asm" option then I would think that cross platform consistency
would happen. I would have to go diving into the source to find out
where the timings are happening. On Solaris the best timer is the
gethrtime() function as it works down to the nanosec and is accurate to
the millisec at least.

Dennis




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux