Announce: OpenSSH 6.9 released

[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]

 



OpenSSH 6.9 has just been released. It will be available from the
mirrors listed at http://www.openssh.com/ shortly.

OpenSSH is a 100% complete SSH protocol version 1.3, 1.5 and 2.0
implementation and includes sftp client and server support.

Once again, we would like to thank the OpenSSH community for their
continued support of the project, especially those who contributed
code or patches, reported bugs, tested snapshots or donated to the
project. More information on donations may be found at:
http://www.openssh.com/donations.html

Future Deprecation Notice
=========================

The 7.0 release of OpenSSH, due for release in late July, will
deprecate several features, some of which may affect compatibility
or existing configurations. The intended changes are as follows:

 * The default for the sshd_config(5) PermitRootLogin option will
   change from "yes" to "no".

 * Support for the legacy version 1.x of the SSH protocol will be
   disabled at compile time by default.

 * Support for the 1024-bit diffie-hellman-group1-sha1 key exchange
   will be run-time disabled by default.

 * Support for ssh-dss, ssh-dss-cert-* host and user keys will be
   run-time disabled by default.

 * Support for the legacy v00 cert format will be removed

 * Several ciphers will be disabled by default: blowfish-cbc,
   cast128-cbc, all arcfour variants and the rijndael-cbc aliases
   for AES

 * Refusing all RSA keys smaller than 1024 bits (the current minimum
   is 768 bits)

This list reflects our current intentions, but please check the final
release notes for OpenSSH 7.0 when it is released.

Changes since OpenSSH 6.8
=========================

This is primarily a bugfix release.

Security
--------

 * ssh(1): when forwarding X11 connections with ForwardX11Trusted=no,
   connections made after ForwardX11Timeout expired could be permitted
   and no longer subject to XSECURITY restrictions because of an
   ineffective timeout check in ssh(1) coupled with "fail open"
   behaviour in the X11 server when clients attempted connections with
   expired credentials. This problem was reported by Jann Horn.

 * ssh-agent(1): fix weakness of agent locking (ssh-add -x) to
   password guessing by implementing an increasing failure delay,
   storing a salted hash of the password rather than the password
   itself and using a timing-safe comparison function for verifying
   unlock attempts. This problem was reported by Ryan Castellucci.

New Features
------------

 * ssh(1), sshd(8): promote chacha20-poly1305@xxxxxxxxxxx to be the
   default cipher

 * sshd(8): support admin-specified arguments to AuthorizedKeysCommand;
   bz#2081

 * sshd(8): add AuthorizedPrincipalsCommand that allows retrieving
   authorized principals information from a subprocess rather than
   a file.

 * ssh(1), ssh-add(1): support PKCS#11 devices with external PIN
   entry devices bz#2240

 * sshd(8): allow GSSAPI host credential check to be relaxed for
   multihomed hosts via GSSAPIStrictAcceptorCheck option; bz#928

 * ssh-keygen(1): support "ssh-keygen -lF hostname" to search
   known_hosts and print key hashes rather than full keys.

 * ssh-agent(1): add -D flag to leave ssh-agent in foreground without
   enabling debug mode; bz#2381

Bugfixes
--------

 * ssh(1), sshd(8): deprecate legacy SSH2_MSG_KEX_DH_GEX_REQUEST_OLD
   message and do not try to use it against some 3rd-party SSH
   implementations that use it (older PuTTY, WinSCP).

 * Many fixes for problems caused by compile-time deactivation of
   SSH1 support (including bz#2369)

 * ssh(1), sshd(8): cap DH-GEX group size at 4Kbits for Cisco
   implementations as some would fail when attempting to use group
   sizes >4K; bz#2209

 * ssh(1): fix out-of-bound read in EscapeChar configuration option
   parsing; bz#2396

 * sshd(8): fix application of PermitTunnel, LoginGraceTime,
   AuthenticationMethods and StreamLocalBindMask options in Match
   blocks

 * ssh(1), sshd(8): improve disconnection message on TCP reset;
   bz#2257

 * ssh(1): remove failed remote forwards established by muliplexing
   from the list of active forwards; bz#2363

 * sshd(8): make parsing of authorized_keys "environment=" options
   independent of PermitUserEnv being enabled; bz#2329

 * sshd(8): fix post-auth crash with permitopen=none; bz#2355

 * ssh(1), ssh-add(1), ssh-keygen(1): allow new-format private keys
   to be encrypted with AEAD ciphers; bz#2366

 * ssh(1): allow ListenAddress, Port and AddressFamily configuration
   options to appear in any order; bz#86

 * sshd(8): check for and reject missing arguments for VersionAddendum
   and ForceCommand; bz#2281

 * ssh(1), sshd(8): don't treat unknown certificate extensions as
   fatal; bz#2387

 * ssh-keygen(1): make stdout and stderr output consistent; bz#2325

 * ssh(1): mention missing DISPLAY environment in debug log when X11
   forwarding requested; bz#1682

 * sshd(8): correctly record login when UseLogin is set; bz#378

 * sshd(8): Add some missing options to sshd -T output and fix output
   of VersionAddendum and HostCertificate. bz#2346   

 * Document and improve consistency of options that accept a "none"
   argument" TrustedUserCAKeys, RevokedKeys (bz#2382),
   AuthorizedPrincipalsFile (bz#2288)

 * ssh(1): include remote username in debug output; bz#2368

 * sshd(8): avoid compatibility problem with some versions of Tera
   Term, which would crash when they received the hostkeys notification
   message (hostkeys-00@xxxxxxxxxxx)

 * sshd(8): mention ssh-keygen -E as useful when comparing legacy MD5
   host key fingerprints; bz#2332

 * ssh(1): clarify pseudo-terminal request behaviour and use make
   manual language consistent; bz#1716

 * ssh(1): document that the TERM environment variable is not subject
   to SendEnv and AcceptEnv; bz#2386

Portable OpenSSH
----------------

 * sshd(8): Format UsePAM setting when using sshd -T, part of bz#2346

 * Look for '${host}-ar' before 'ar', making cross-compilation easier;
   bz#2352.

 * Several portable compilation fixes: bz#2402, bz#2337, bz#2370

 * moduli(5): update DH-GEX moduli

Checksums:
==========

 - SHA1 (openssh-6.9.tar.gz) = cd5fcb93411025bbc4b4b57753b622769dfb1e0d
 - SHA256 (openssh-6.9.tar.gz) = itCMw0aE/xvrGKWhzRD2UM/9kzIOyFaH2dIWMfX8agQ=

 - SHA1 (openssh-6.9p1.tar.gz) = 86ab57f00d0fd9bf302760f2f6deac1b6e9df265
 - SHA256 (openssh-6.9p1.tar.gz) = bgdN9TjzV9RAvmz5PcWBoh8i054jbyF/zY6su2yJbP4=

Please note that the PGP key used to sign releases was recently rotated.
The new key has been signed by the old key to provide continuity. It is
available from the mirror sites as RELEASE_KEY.asc.

Reporting Bugs:
===============

- Please read http://www.openssh.com/report.html
  Security bugs should be reported directly to openssh@xxxxxxxxxxx

OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt,
Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and
Ben Lindstrom.
_______________________________________________
openssh-unix-dev mailing list
openssh-unix-dev@xxxxxxxxxxx
https://lists.mindrot.org/mailman/listinfo/openssh-unix-dev



[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]

[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux