Re: Connection stalls at debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP

[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]

 



On Mon, Feb 9, 2015 at 2:23 PM, Petr Lautrbach <plautrba@xxxxxxxxxx> wrote:

> [...]
> It seems to be the same problem as described and discussed in this [1]
> thread.  MTU 1400 is not enough for packet sent by
> openssh-6.6.1p1-11.1.fc21 with default settings. The size of one of
> initial packets could be even 1968. Your VPN probably makes a
> fragmentation but doesn't do the correct defragmentation. As a
> workaround you can set shorter lists of MACs used by your client, eg:
>

I wrote an FAQ entry for this a long time ago:
http://www.snailbook.com/faq/mtu-mismatch.auto.html

I'd add "if you run netstat on both ends and see "SendQ" non-zero and not
decreasing then this is likely your problem.

I should add this to the openssh.com faq....

-- 
Darren Tucker (dtucker at zip.com.au)
GPG key 8FF4FA69 / D9A3 86E9 7EEE AF4B B2D4  37C9 C982 80C7 8FF4 FA69
    Good judgement comes with experience. Unfortunately, the experience
usually comes from bad judgement.
_______________________________________________
openssh-unix-dev mailing list
openssh-unix-dev@xxxxxxxxxxx
https://lists.mindrot.org/mailman/listinfo/openssh-unix-dev




[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]

[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux