Hello everybody, after installing openbsd-netcat some tests in multiplex.sh do still fail for me. Sadly this happens when trying to build a package only, everything works just fine if I try to debug this. Any ideas? Logfile failed-regress.log is attached. [...] run test multiplex.sh ... test connection multiplexing: envpass test connection multiplexing: transfer test connection multiplexing: forward cmp: EOF on openssh/regress/copy ssh: corrupted copy of openssh/regress/data cmp: EOF on openssh/regress/copy ssh: corrupted copy of openssh/regress/data test connection multiplexing: status 0 test connection multiplexing: status 1 test connection multiplexing: status 4 test connection multiplexing: status 5 test connection multiplexing: status 44 test connection multiplexing: cmd check test connection multiplexing: cmd forward local (TCP) test connection multiplexing: cmd forward remote (TCP) test connection multiplexing: cmd forward local (UNIX) test connection multiplexing: cmd forward remote (UNIX) test connection multiplexing: cmd exit test connection multiplexing: cmd stop failed connection multiplexing Makefile:168: recipe for target 't-exec' failed -- main(a){char*c=/* Schoene Gruesse */"B?IJj;MEH" "CX:;",b;for(a/* Chris get my mail address: */=0;b=c[a++];) putchar(b-1/(/* gcc -o sig sig.c && ./sig */b/42*2-3)*42);}
trace: forward over TCP/IP and check result debug1: multiplexing control connection debug2: fd 6 setting O_NONBLOCK debug3: fd 6 is O_NONBLOCK debug1: channel 1: new [mux-control] debug3: channel_post_mux_listener: new mux channel 1 fd 6 debug3: mux_master_read_cb: channel 1: hello sent debug3: mux_master_read_cb: channel 1 packet type 0x00000001 len 4 debug2: process_mux_master_hello: channel 1 slave version 4 debug3: mux_master_read_cb: channel 1 packet type 0x10000006 len 42 debug2: process_mux_open_fwd: channel 1: request local forward 127.0.0.1:4244 -> 127.0.0.1:4243 debug3: channel_setup_fwd_listener_tcpip: type 2 wildcard 0 addr 127.0.0.1 debug1: Local forwarding listening on 127.0.0.1 port 4244. debug2: fd 7 setting O_NONBLOCK debug3: fd 7 is O_NONBLOCK debug1: channel 2: new [port listener] debug2: channel 1: ctl read<=0 rfd 6 len 0 debug2: channel 1: read failed debug2: channel 1: close_read debug2: channel 1: input open -> drain debug2: channel 1: ibuf empty debug2: channel 1: input drain -> closed debug2: channel 1: rcvd close debug2: channel 1: output open -> drain debug2: channel 1: obuf empty debug2: channel 1: close_write debug2: channel 1: output drain -> closed debug2: channel 1: is dead (local) debug2: channel 1: gc: notify user debug3: mux_master_control_cleanup_cb: entering for channel 1 debug2: channel 1: gc: user detached debug2: channel 1: is dead (local) debug2: channel 1: garbage collecting debug1: channel 1: free: mux-control, nchannels 3 debug3: channel 1: status: The following connections are open: debug1: Connection to port 4244 forwarding to 127.0.0.1 port 4243 requested. debug2: fd 6 setting TCP_NODELAY debug2: fd 6 setting O_NONBLOCK debug3: fd 6 is O_NONBLOCK debug1: channel 1: new [direct-tcpip] debug2: channel 1: open confirm rwindow 2097152 rmax 32768 debug2: channel 1: read<=0 rfd 6 len 0 debug2: channel 1: read failed debug2: channel 1: close_read debug2: channel 1: input open -> drain debug2: channel 1: ibuf empty debug2: channel 1: send eof debug2: channel 1: input drain -> closed debug2: channel 1: rcvd eof debug2: channel 1: output open -> drain debug2: channel 1: obuf empty debug2: channel 1: close_write debug2: channel 1: output drain -> closed debug2: channel 1: rcvd close debug3: channel 1: will not send data after close debug2: channel 1: send close debug2: channel 1: is dead debug2: channel 1: garbage collecting debug1: channel 1: free: direct-tcpip: listening port 4244 for 127.0.0.1 port 4243, connect from 127.0.0.1 port 48354 to 127.0.0.1 port 4244, nchannels 3 debug3: channel 1: status: The following connections are open: #1 direct-tcpip: listening port 4244 for 127.0.0.1 port 4243, connect from 127.0.0.1 port 48354 to 127.0.0.1 port 4244 (t4 r0 i3/0 o3/0 fd 6/6 cc -1) FAIL: ssh: corrupted copy of /tmp/.repo-make-15356-QguCp9/openssh-git/src/openssh/regress/data trace: forward over UNIX and check result debug1: multiplexing control connection debug2: fd 6 setting O_NONBLOCK debug3: fd 6 is O_NONBLOCK debug1: channel 1: new [mux-control] debug3: channel_post_mux_listener: new mux channel 1 fd 6 debug3: mux_master_read_cb: channel 1: hello sent debug3: mux_master_read_cb: channel 1 packet type 0x00000001 len 4 debug2: process_mux_master_hello: channel 1 slave version 4 debug3: mux_master_read_cb: channel 1 packet type 0x10000006 len 166 debug2: process_mux_open_fwd: channel 1: request local forward /tmp/.repo-make-15356-QguCp9/openssh-git/src/openssh/regress/unix-2.fwd:-2 -> /tmp/.repo-make-15356-QguCp9/openssh-git/src/openssh/regress/unix-1.fwd:-2 debug3: channel_setup_fwd_listener_streamlocal: type 18 path /tmp/.repo-make-15356-QguCp9/openssh-git/src/openssh/regress/unix-2.fwd debug1: Local forwarding listening on path /tmp/.repo-make-15356-QguCp9/openssh-git/src/openssh/regress/unix-2.fwd. debug2: fd 8 setting O_NONBLOCK debug3: fd 8 is O_NONBLOCK debug1: channel 3: new [unix listener] debug2: channel 1: ctl read<=0 rfd 6 len 0 debug2: channel 1: read failed debug2: channel 1: close_read debug2: channel 1: input open -> drain debug2: channel 1: ibuf empty debug2: channel 1: input drain -> closed debug2: channel 1: rcvd close debug2: channel 1: output open -> drain debug2: channel 1: obuf empty debug2: channel 1: close_write debug2: channel 1: output drain -> closed debug2: channel 1: is dead (local) debug2: channel 1: gc: notify user debug3: mux_master_control_cleanup_cb: entering for channel 1 debug2: channel 1: gc: user detached debug2: channel 1: is dead (local) debug2: channel 1: garbage collecting debug1: channel 1: free: mux-control, nchannels 4 debug3: channel 1: status: The following connections are open: debug1: multiplexing control connection debug2: fd 6 setting O_NONBLOCK debug3: fd 6 is O_NONBLOCK debug1: channel 1: new [mux-control] debug3: channel_post_mux_listener: new mux channel 1 fd 6 debug3: mux_master_read_cb: channel 1: hello sent debug3: mux_master_read_cb: channel 1 packet type 0x00000001 len 4 debug2: process_mux_master_hello: channel 1 slave version 4 debug3: mux_master_read_cb: channel 1 packet type 0x10000006 len 166 debug2: process_mux_open_fwd: channel 1: request remote forward /tmp/.repo-make-15356-QguCp9/openssh-git/src/openssh/regress/unix-3.fwd:-2 -> /tmp/.repo-make-15356-QguCp9/openssh-git/src/openssh/regress/unix-2.fwd:-2 debug1: mux_confirm_remote_forward: success for: listen -2, connect /tmp/.repo-make-15356-QguCp9/openssh-git/src/openssh/regress/unix-2.fwd:-2 debug2: channel 1: ctl read<=0 rfd 6 len 0 debug2: channel 1: read failed debug2: channel 1: close_read debug2: channel 1: input open -> drain debug2: channel 1: ibuf empty debug2: channel 1: input drain -> closed debug2: channel 1: rcvd close debug2: channel 1: output open -> drain debug2: channel 1: obuf empty debug2: channel 1: close_write debug2: channel 1: output drain -> closed debug2: channel 1: is dead (local) debug2: channel 1: gc: notify user debug3: mux_master_control_cleanup_cb: entering for channel 1 debug2: channel 1: gc: user detached debug2: channel 1: is dead (local) debug2: channel 1: garbage collecting debug1: channel 1: free: mux-control, nchannels 4 debug3: channel 1: status: The following connections are open: debug1: client_input_channel_open: ctype forwarded-streamlocal@xxxxxxxxxxx rchan 1 win 2097152 max 32768 debug1: client_request_forwarded_streamlocal: /tmp/.repo-make-15356-QguCp9/openssh-git/src/openssh/regress/unix-3.fwd debug2: fd 6 setting O_NONBLOCK debug1: connect_next: host /tmp/.repo-make-15356-QguCp9/openssh-git/src/openssh/regress/unix-2.fwd ([unix]:/tmp/.repo-make-15356-QguCp9/openssh-git/src/openssh/regress/unix-2.fwd) in progress, fd=6 debug3: fd 6 is O_NONBLOCK debug3: fd 6 is O_NONBLOCK debug1: channel 1: new [forwarded-streamlocal] debug1: confirm forwarded-streamlocal@xxxxxxxxxxx debug3: channel 1: waiting for connection debug1: channel 1: connected to /tmp/.repo-make-15356-QguCp9/openssh-git/src/openssh/regress/unix-2.fwd port -2 debug1: Connection to port -2 forwarding to /tmp/.repo-make-15356-QguCp9/openssh-git/src/openssh/regress/unix-1.fwd port -2 requested. debug2: fd 9 setting O_NONBLOCK debug3: fd 9 is O_NONBLOCK debug1: channel 4: new [direct-streamlocal@xxxxxxxxxxx] debug2: channel 4: open confirm rwindow 2097152 rmax 32768 debug2: channel 1: rcvd eof debug2: channel 1: output open -> drain debug2: channel 1: obuf empty debug2: channel 1: close_write debug2: channel 1: output drain -> closed debug2: channel 4: read<=0 rfd 9 len 0 debug2: channel 4: read failed debug2: channel 4: close_read debug2: channel 4: input open -> drain debug2: channel 4: ibuf empty debug2: channel 4: send eof debug2: channel 4: input drain -> closed debug2: channel 4: window 1988608 sent adjust 108544 debug2: channel 4: rcvd eof debug2: channel 4: output open -> drain debug2: channel 4: rcvd close debug3: channel 4: will not send data after close debug2: channel 1: rcvd adjust 108544 debug3: channel 4: will not send data after close debug2: channel 4: obuf empty debug2: channel 4: close_write debug2: channel 4: output drain -> closed debug2: channel 4: send close debug2: channel 4: is dead debug2: channel 4: garbage collecting debug1: channel 4: free: direct-streamlocal@xxxxxxxxxxx: listening port -2 for /tmp/.repo-make-15356-QguCp9/openssh-git/src/openssh/regress/unix-1.fwd port -2, connect from port 0 to /tmp/.repo-make-15356-QguCp9/openssh-git/src/openssh/regress/unix-2.fwd port 0, nchannels 5 debug3: channel 4: status: The following connections are open: #1 forwarded-streamlocal (t4 r1 i0/0 o3/0 fd 6/6 cc -1) #4 direct-streamlocal@xxxxxxxxxxx: listening port -2 for /tmp/.repo-make-15356-QguCp9/openssh-git/src/openssh/regress/unix-1.fwd port -2, connect from port 0 to /tmp/.repo-make-15356-QguCp9/openssh-git/src/openssh/regress/unix-2.fwd port 0 (t4 r2 i3/0 o3/0 fd 9/9 cc -1) debug2: channel 1: read<=0 rfd 6 len 0 debug2: channel 1: read failed debug2: channel 1: close_read debug2: channel 1: input open -> drain debug2: channel 1: ibuf empty debug2: channel 1: send eof debug2: channel 1: input drain -> closed debug2: channel 1: send close debug3: channel 1: will not send data after close debug2: channel 1: rcvd close debug3: channel 1: will not send data after close debug2: channel 1: is dead debug2: channel 1: garbage collecting debug1: channel 1: free: forwarded-streamlocal, nchannels 4 debug3: channel 1: status: The following connections are open: #1 forwarded-streamlocal (t4 r1 i3/0 o3/0 fd 6/6 cc -1) FAIL: ssh: corrupted copy of /tmp/.repo-make-15356-QguCp9/openssh-git/src/openssh/regress/data
Attachment:
signature.asc
Description: PGP signature
_______________________________________________ openssh-unix-dev mailing list openssh-unix-dev@xxxxxxxxxxx https://lists.mindrot.org/mailman/listinfo/openssh-unix-dev