Re: Pulling stalls before 52MB (works via netcat)

[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]

 



On Sat, May 03, 2014 at 08:57:26PM -0700, Grant wrote:
> > I can push fine over ssh but pulling via rsync or scp always stalls
> > at about the same point which must be between 26MB and 52MB.  I can
> > pull via netcat just fine.  I've tried compiling HPN out of the
> > install on both the client and server and I've tried -C on the
> > client with the same result.  I'm on Gentoo.  Any ideas?
> 
> I should have said I'm on openssh-6.6_p1-r1.
> 
> - Grant

Hi.

First off, the HPN patches will not be supported here so I recommend
doing all further debugging on this issue with a pristine OpenSSH.

Now, you mentioned you backed out HPN and the problem remains, so I'll
assume it's not HPN related.

The first thing that comes to mind is you're over-taxing Linux's
selective ack's. Try disabling with:

# echo 0 > /proc/sys/net/ipv4/tcp_sack

If that doesn't help, let's start getting more info, maybe some packet
logs around hang time and client-side and server-side logs.

--mancha

Attachment: pgpnnR2s44FCG.pgp
Description: PGP signature

_______________________________________________
openssh-unix-dev mailing list
openssh-unix-dev@xxxxxxxxxxx
https://lists.mindrot.org/mailman/listinfo/openssh-unix-dev

[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]

[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux