Hello, I'm on a network where there is no IPv6 connectivity. When I try to fire up openconnect, it tries to connect via IPv6 and there does not seem to be an option to force IPv4. I now removed the DNS entry and waiting for it to time out, but I wonder if there is a trick, otherwise I would probably would make a patch ready. (x1) [~/work/openconnect-7.08] /local/openconnect-7.08/sbin/openconnect vpn.gmvl.de POST https://vpn.gmvl.de/ Failed to connect to [2a01:4f8:b0:2fff::2]:443: Network is unreachable Failed to connect to host vpn.gmvl.de Failed to open HTTPS connection to vpn.gmvl.de Failed to obtain WebVPN cookie (x1) [~/work/openconnect-7.08] ip a s 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 54:ee:75:43:af:c9 brd ff:ff:ff:ff:ff:ff 3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether 60:57:18:91:6f:7c brd ff:ff:ff:ff:ff:ff inet 192.168.4.84/20 brd 192.168.15.255 scope global wlan0 valid_lft forever preferred_lft forever inet6 fe80::6257:18ff:fe91:6f7c/64 scope link valid_lft forever preferred_lft forever 4: wwan0: <BROADCAST,MULTICAST,NOARP> mtu 1428 qdisc noop state DOWN group default qlen 1000 link/ether 06:54:d8:8b:e2:dd brd ff:ff:ff:ff:ff:ff Cheers, Thomas
