Hi Nikos, I noticed ocserv 0.11.6 includes an Acct-Session-Id with the Start packet, but not with the Interim-Update packets. Is this the correct behaviour? If so, is it possible to (optionally) add the Acct-Session-Id to all accounting packets? (If I understand RFC2866 correctly the Acct-Session-Id is required for all accounting requests.) Thanks, Niels (47) Received Accounting-Request Id 33 from XYZ:6183 to ABC:1813 length 222 (47) Acct-Status-Type = Start (47) Connect-Info = ?someclient" (47) NAS-Identifier = ?XYZ" (47) NAS-IP-Address = ABC (47) User-Name = "niels" (47) Service-Type = Framed-User (47) Framed-Protocol = PPP (47) Calling-Station-Id = ?DEF" (47) Acct-Session-Id = "54K6X16YQ+62vq0RNBYGavKuiR5nKlQi/tvqte5wl3g=" (47) Acct-Authentic = RADIUS (47) NAS-Port = 18632 (47) Acct-Delay-Time = 0 (48) Received Accounting-Request Id 185 from XYZ:53953 to ABC:1813 length 131 (48) Acct-Status-Type = Interim-Update (48) NAS-Identifier = ?XYZ" (48) NAS-IP-Address = ABC (48) User-Name = "niels" (48) Service-Type = Framed-User (48) Framed-Protocol = PPP (48) Framed-IP-Address = 10.252.244.110 (48) Acct-Input-Octets = 0 (48) Acct-Output-Octets = 0 (48) Acct-Input-Gigawords = 0 (48) Acct-Output-Gigawords = 0 (48) NAS-Port = 18636 (48) Acct-Delay-Time = 0
