On 2015-03-25, 05:41, David Woodhouse wrote: > Do you have TunTapOSX installed? Great advice! I do have TunTapOSX installed but not running. Once I enabled it ("port load tuntaposx"), I can get openconnect works as intended. > What happens if you add '-i utun0' to the openconnect command > line? This produce this error: Invalid interface name 'utun0'; must match 'tun%d' Set up tun device failed Furthermore, there is no "utun*" device in this system: mycomputer:~ root# ls -l /dev/*tun* crw-rw---- 1 root wheel 39, 0 2 Apr 21:41 /dev/tun0 crw-rw---- 1 root wheel 39, 1 1 Apr 12:25 /dev/tun1 crw-rw---- 1 root wheel 39, 10 1 Apr 12:25 /dev/tun10 crw-rw---- 1 root wheel 39, 11 1 Apr 12:25 /dev/tun11 crw-rw---- 1 root wheel 39, 12 1 Apr 12:25 /dev/tun12 crw-rw---- 1 root wheel 39, 13 1 Apr 12:25 /dev/tun13 crw-rw---- 1 root wheel 39, 14 1 Apr 12:25 /dev/tun14 crw-rw---- 1 root wheel 39, 15 1 Apr 12:25 /dev/tun15 crw-rw---- 1 root wheel 39, 2 1 Apr 12:25 /dev/tun2 crw-rw---- 1 root wheel 39, 3 1 Apr 12:25 /dev/tun3 crw-rw---- 1 root wheel 39, 4 1 Apr 12:25 /dev/tun4 crw-rw---- 1 root wheel 39, 5 1 Apr 12:25 /dev/tun5 crw-rw---- 1 root wheel 39, 6 1 Apr 12:25 /dev/tun6 crw-rw---- 1 root wheel 39, 7 1 Apr 12:25 /dev/tun7 crw-rw---- 1 root wheel 39, 8 1 Apr 12:25 /dev/tun8 crw-rw---- 1 root wheel 39, 9 1 Apr 12:25 /dev/tun9 Thanks! -- ____ ____ ____ ____ (stephan paul) Arif Sahari Wibowo /___ /___/ /___/ /___ http://www.arifsaha.com/ ____/ / / / ____/ ***** http://www.catholic.org/clife/lent/#content *****