I?m using 0.8.0, as it?s said in the manual, # Configuration files that will be applied per user connection or # per group. Each file name on these directories must match the username # or the groupname. # The options allowed in the configuration files are dns, nbns, # ipv?-network, ipv4-netmask, ipv6-prefix, rx/tx-per-sec, iroute, route, # net-priority, deny-roaming, no-udp and cgroup I tried to add lines to my per-user conf, route and dns, leaving both empty in etc/config, route works but not dns dns pushed to client using X-CSTP-DNS: are lines in etc/config, even it?s left empty, none of dns lines in my config file below is pushed. # cat etc/config-per-user/dnsonly dns = 114.114.114.114 dns = 8.8.8.8 # Google routes route = 8.8.0.0/255.255.0.0 route = 216.239.32.0/255.255.224.0 route = 64.233.160.0/255.255.224.0 route = 66.249.80.0/255.255.240.0 route = 72.14.192.0/255.255.192.0 route = 209.85.128.0/255.255.128.0 route = 66.102.0.0/255.255.240.0 route = 74.125.0.0/255.255.0.0 route = 64.18.0.0/255.255.240.0 route = 207.126.144.0/255.255.240.0 route = 173.194.0.0/255.255.0.0 https://sskaje.me/ sskaje at gmail.com
