Greetings, I recently upgraded my linux workstation to open-suse 13.2, and am running openconnect-6.00-3.1.3.x86_64. I can vpn-connect to my office, things work fine for some number of hours, at which point all my konsole windows will suddenly freeze, and my thunderbird client times out trying to connect to the email server. Opening a fresh konsole and trying to ping office servers also fails. Curiously, firefox continues to work. While my workstation is frozen, my windows laptop continues to be vpn-connected to the office and its putty windows work fine, so the office server is not the problem. If I use the laptop to try to ping back to my workstation from a work server, that also times out, the pings don't work, the freeze is in both directions. I have tried raising the verbosity of openconnect. When the freeze happens, the number of DTLS packets sent and received drops way off, I only see stuff like this: No work to do; sleeping for 11000 ms... Got CSTP DPD response No work to do; sleeping for 11000 ms... Send DTLS Keepalive No work to do; sleeping for 4000 ms... Send CSTP Keepalive No work to do; sleeping for 10000 ms... Send DTLS DPD No work to do; sleeping for 5000 ms... Received DTLS packet 0x04 of 1 bytes Got DTLS DPD response No work to do; sleeping for 5000 ms... Send CSTP DPD No work to do; sleeping for 10000 ms... Got CSTP DPD response No work to do; sleeping for 10000 ms... Send DTLS Keepalive No work to do; sleeping for 5000 ms... Send CSTP Keepalive No work to do; sleeping for 10000 ms... Send DTLS DPD No work to do; sleeping for 5000 ms... Received DTLS packet 0x04 of 1 bytes Got DTLS DPD response No work to do; sleeping for 5000 ms... Send CSTP DPD No work to do; sleeping for 10000 ms... Got CSTP DPD response No work to do; sleeping for 10000 ms... This happens 4-5 times a day. The only choice at that point is to Cntl-C out of the openconnect session, then reconnect to the work server, then I'm good again for a few hours. Prior to my workstation upgrade (opensuse 12.1) I did not have these problems. I'm looking for help/advice on how best to debug this problem. Ideas? Thanks, Kevan
