On Mon, 2014-08-11 at 01:10 -0400, Carl Craft wrote: > Hello, > > Compiled 6.0 successfully for Windows7, everything seemed great until: > > Discard bad split include: "10.47.118.240/255.255.255.240" > Discard bad split include: "10.47.100.224/255.255.255.224" > Discard bad split include: "10.47.101.0/255.255.255.224" > Discard bad split include: "10.47.101.32/255.255.255.224" > Discard bad split include: "10.47.100.208/255.255.255.240" > Discard bad split include: "10.47.118.160/255.255.255.240" > Discard bad split include: "10.47.118.176/255.255.255.240" > Discard bad split include: "10.47.118.208/255.255.255.240" > Discard bad split include: "10.47.118.192/255.255.255.240" > > I'm not sure what this means, but I can see that the routes are not > added to the routing table after connecting. I also saw that the > interface IP address was not set, but assumed that was a failure due > to the above. I can't find any documentation about this, any help > would be appreciated! I think this should already be fixed in the git tree by http://git.infradead.org/users/dwmw2/openconnect.git/commitdiff/671c8eb -- David Woodhouse Open Source Technology Centre David.Woodhouse at intel.com Intel Corporation -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 5745 bytes Desc: not available URL: <http://lists.infradead.org/pipermail/openconnect-devel/attachments/20140811/e39b0798/attachment.bin>
