Re: [PATCH v3] drm/nouveau: Add support to control backlight using bl_power for nva3.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]<

 



On Fri, Nov 4, 2022 at 11:04 PM Antonio Gomes <antoniospg100@xxxxxxxxx> wrote:
>
> From: antoniospg <antoniospg100@xxxxxxxxx>
>
> Summary:
>
> * Add support to turn on/off backlight when changing values in bl_power
>   file. This is achieved by using function backlight_get_brightness()
>   in nva3_set_intensity to get current brightness.
>
> Test plan:
>
> * Turn off:
> echo 1 > /sys/class/backlight/nv_backlight/bl_power
>
> * Turn on:
> echo 0 > /sys/class/backlight/nv_backlight/bl_power
>
> Signed-off-by: antoniospg <antoniospg100@xxxxxxxxx>
> ---
>  drivers/gpu/drm/nouveau/nouveau_backlight.c | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/nouveau/nouveau_backlight.c b/drivers/gpu/drm/nouveau/nouveau_backlight.c
> index a2141d3d9b1d..5c82f5189b79 100644
> --- a/drivers/gpu/drm/nouveau/nouveau_backlight.c
> +++ b/drivers/gpu/drm/nouveau/nouveau_backlight.c
> @@ -263,7 +263,11 @@ nva3_set_intensity(struct backlight_device *bd)
>         u32 div, val;
>
>         div = nvif_rd32(device, NV50_PDISP_SOR_PWM_DIV(or));
> -       val = (bd->props.brightness * div) / 100;
> +
> +       val = backlight_get_brightness(bd);
> +       if (val)
> +               val = (val * div) / 100;
> +
>         if (div) {
>                 nvif_wr32(device, NV50_PDISP_SOR_PWM_CTL(or),
>                           val |
> --
> 2.25.1
>

Reviewed-by: Karol Herbst <kherbst@xxxxxxxxxx>

btw, i'll fix up the name with the one from the Email From field, so
you won't have to send it out again.




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux