Am 26.11.20 um 13:57 schrieb Mark Hounschell:
On 11/26/20 7:41 AM, Christian König wrote:
Hi Mark,
Am 26.11.20 um 13:26 schrieb Mark Hounschell:
On 11/26/20 7:05 AM, Christian König wrote:
Hi Mark,
Am 26.11.20 um 10:59 schrieb Mark Hounschell:
On 11/26/20 3:35 AM, Christian König wrote:
I'm running an older "NVIDIA Corporation G70 [GeForce 7800 GT]
(rev a1)" card in a newer BIOSTAR B550GTA MB. Kernel 5.10-rcx
does not work. I get no virtual consoles or X screen.
thanks for the dmesg.
Problem is I don't have the slightest idea what's going wrong here :)
The code should be functional identical, it was just moved from TTM
to nouveau, so we are missing some detail in the handling.
Can you run the following test for me: First you need to disable
loading of the nouveau kernel module by adding
modprobe.blacklist=nouveau to the kernel command line.
Then log into the system over the network and run the following
commands:
sudo modprobe ttm
sudo bash -c "echo 'ttm_bo_kmap' >
/sys/kernel/debug/tracing/set_graph_function"
sudo bash -c "echo function_graph >
/sys/kernel/debug/tracing/current_tracer"
sudo modprobe nouveau
sudo bash -c "cat /sys/kernel/debug/tracing/trace" > trace.log
Please then send me the resulting trace.log file so that I can
investigate why mapping the framebuffer fails during driver load.
Thanks in advance,
Christian.
I hope this is what you need. I do normally turn off a lot of debug
features. Let me know if I need to change the kernel config.
It was not what I had expected but it pointed me in the right
direction. I think I've found the problem, it's just an uninitialized
return value for your hardware generation.
Please try the attached patch and let me know if it fixes the problem.
Thanks in advance,
Christian.
Yep, that fixed it. -rc6?
If I get an rb today then yes, otherwise it might end up in -rc7 next week.
Any objection if I add an Reported-and-Tested-by: Mark Hounschell
<dmarkh@xxxxxxxxxx> ?
Thanks for the help,
Christian.
Thanks
Mark
_______________________________________________
Nouveau mailing list
Nouveau@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/nouveau
