Re: [PATCH v3] PCI: Reprogram bridge prefetch registers on resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]<

 



Am 27.09.18 um 22:52 schrieb Bjorn Helgaas:
[+cc LKML]

On Tue, Sep 18, 2018 at 04:32:44PM -0500, Bjorn Helgaas wrote:
On Thu, Sep 13, 2018 at 11:37:45AM +0800, Daniel Drake wrote:
On 38+ Intel-based Asus products, the nvidia GPU becomes unusable
after S3 suspend/resume. The affected products include multiple
generations of nvidia GPUs and Intel SoCs. After resume, nouveau logs
many errors such as:

     fifo: fault 00 [READ] at 0000005555555000 engine 00 [GR] client 04
           [HUB/FE] reason 4a [] on channel -1 [007fa91000 unknown]
     DRM: failed to idle channel 0 [DRM]

Similarly, the nvidia proprietary driver also fails after resume
(black screen, 100% CPU usage in Xorg process). We shipped a sample
to Nvidia for diagnosis, and their response indicated that it's a
problem with the parent PCI bridge (on the Intel SoC), not the GPU.

Runtime suspend/resume works fine, only S3 suspend is affected.

We found a workaround: on resume, rewrite the Intel PCI bridge
'Prefetchable Base Upper 32 Bits' register (PCI_PREF_BASE_UPPER32). In
the cases that I checked, this register has value 0 and we just have to
rewrite that value.

Linux already saves and restores PCI config space during suspend/resume,
but this register was being skipped because upon resume, it already
has value 0 (the correct, pre-suspend value).

Intel appear to have previously acknowledged this behaviour and the
requirement to rewrite this register.
https://bugzilla.kernel.org/show_bug.cgi?id=116851#c23

Based on that, rewrite the prefetch register values even when that
appears unnecessary.

We have confirmed this solution on all the affected models we have
in-hands (X542UQ, UX533FD, X530UN, V272UN).

Additionally, this solves an issue where r8169 MSI-X interrupts were
broken after S3 suspend/resume on Asus X441UAR. This issue was recently
worked around in commit 7bb05b85bc2d ("r8169: don't use MSI-X on
RTL8106e"). It also fixes the same issue on RTL6186evl/8111evl on an
Aimfor-tech laptop that we had not yet patched. I suspect it will also
fix the issue that was worked around in commit 7c53a722459c ("r8169:
don't use MSI-X on RTL8168g").

Thomas Martitz reports that this change also solves an issue where
the AMD Radeon Polaris 10 GPU on the HP Zbook 14u G5 is unresponsive
after S3 suspend/resume.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=201069
Signed-off-by: Daniel Drake <drake@xxxxxxxxxxxx>

Applied with Rafael's and Peter's reviewed-by to pci/enumeration for v4.20.
Thanks for the the huge investigative effort!

Since this looks low-risk and fixes several painful issues, I think
this merits a stable tag and being included in v4.19 (instead of
waiting for v4.20).

I moved it to for-linus for v4.19.  Let me know if you object.


The latest iteration does not work on my HP system. The GPU fails to power up just like the unpatched kernel.

[ 516.833580] amdgpu 0000:01:00.0: Refused to change power state, currently in D3 [ 516.912885] amdgpu 0000:01:00.0: Refused to change power state, currently in D3 [ 516.929175] amdgpu 0000:01:00.0: Refused to change power state, currently in D3 [ 521.932435] [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 5secs aborting [ 521.932440] [drm:amdgpu_atom_execute_table_locked] *ERROR* atombios stuck executing C392 (len 62, WS 0, PS 0) @ 0xC3AE [ 521.932442] [drm:amdgpu_atom_execute_table_locked] *ERROR* atombios stuck executing ADB8 (len 140, WS 0, PS 8) @ 0xADD3
[  521.932444] [drm:amdgpu_device_resume] *ERROR* amdgpu asic init failed
[  522.883309] amdgpu 0000:01:00.0: Wait for MC idle timedout !
[  523.831676] amdgpu 0000:01:00.0: Wait for MC idle timedout !
[ 523.832931] [drm] PCIE GART of 256M enabled (table at 0x000000F400000000).
[  523.836807] amdgpu: [powerplay] Failed to send Message.
[  523.836862] amdgpu: [powerplay] SMC address must be 4 byte aligned.
[ 523.836863] amdgpu: [powerplay] [AVFS][Polaris10_SetupGfxLvlStruct] Problems copying VRConfig value over to SMC [ 523.836864] amdgpu: [powerplay] [AVFS][Polaris10_AVFSEventMgr] Could not Copy Graphics Level table over to SMU
[  523.836908] amdgpu: [powerplay]
                last message was failed ret is 65535
[  523.836924] amdgpu: [powerplay]
                failed to send message 252 ret is 65535
[  523.836949] amdgpu: [powerplay]
                last message was failed ret is 65535
[  523.836965] amdgpu: [powerplay]
                failed to send message 253 ret is 65535
[  523.836989] amdgpu: [powerplay]
                last message was failed ret is 65535
[  523.837006] amdgpu: [powerplay]
                failed to send message 250 ret is 65535
[  523.837029] amdgpu: [powerplay]
                last message was failed ret is 65535
[  523.837045] amdgpu: [powerplay]




---
  drivers/pci/pci.c | 25 +++++++++++++++++--------
  1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 29ff9619b5fa..5d58220b6997 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1289,12 +1289,12 @@ int pci_save_state(struct pci_dev *dev)
  EXPORT_SYMBOL(pci_save_state);
static void pci_restore_config_dword(struct pci_dev *pdev, int offset,
-				     u32 saved_val, int retry)
+				     u32 saved_val, int retry, bool force)
  {
  	u32 val;
pci_read_config_dword(pdev, offset, &val);
-	if (val == saved_val)
+	if (!force && val == saved_val)
  		return;
for (;;) {
@@ -1313,25 +1313,34 @@ static void pci_restore_config_dword(struct pci_dev *pdev, int offset,
  }
static void pci_restore_config_space_range(struct pci_dev *pdev,
-					   int start, int end, int retry)
+					   int start, int end, int retry,
+					   bool force)
  {
  	int index;
for (index = end; index >= start; index--)
  		pci_restore_config_dword(pdev, 4 * index,
  					 pdev->saved_config_space[index],
-					 retry);
+					 retry, force);
  }
static void pci_restore_config_space(struct pci_dev *pdev)
  {
  	if (pdev->hdr_type == PCI_HEADER_TYPE_NORMAL) {
-		pci_restore_config_space_range(pdev, 10, 15, 0);
+		pci_restore_config_space_range(pdev, 10, 15, 0, false);
  		/* Restore BARs before the command register. */
-		pci_restore_config_space_range(pdev, 4, 9, 10);
-		pci_restore_config_space_range(pdev, 0, 3, 0);
+		pci_restore_config_space_range(pdev, 4, 9, 10, false);
+		pci_restore_config_space_range(pdev, 0, 3, 0, false);
+	} else if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+		pci_restore_config_space_range(pdev, 12, 15, 0, false);
+		/* Force rewriting of prefetch registers to avoid
+		 * S3 resume issues on Intel PCI bridges that occur when
+		 * these registers are not explicitly written.
+		 */
+		pci_restore_config_space_range(pdev, 9, 11, 0, true);
+		pci_restore_config_space_range(pdev, 0, 8, 0, false);
  	} else {
-		pci_restore_config_space_range(pdev, 0, 15, 0);
+		pci_restore_config_space_range(pdev, 0, 15, 0, false);
  	}
  }
--
2.17.1


_______________________________________________
Nouveau mailing list
Nouveau@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/nouveau




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux