On Fri, Aug 24, 2018 at 11:42 PM, Peter Wu <peter@xxxxxxxxxxxxx> wrote: > Are these systems also affected through runtime power management? For > example: > > modprobe nouveau # should enable runtime PM > sleep 6 # wait for runtime suspend to kick in > lspci -s1: # runtime resume by reading PCI config space > > On laptops from about 2015-2016 with a GTX 9xxM this sequence results in > hangs on various laptops > (https://bugzilla.kernel.org/show_bug.cgi?id=156341). This works fine here. I'm facing a different issue. >> After a lot of experimentation I found a workaround: during resume, >> set the value of PCI_PREF_BASE_UPPER32 to 0 on the parent PCI bridge. >> Easily done in drivers/pci/quirks.c. Now all nvidia stuff works fine. > > I am curious, how did you discover this? While this could work, perhaps > there are alternative workarounds/fixes? Based on the observation that the following procedure works fine (note the addition of step 3): 1. Boot 2. Suspend/resume 3. echo rescan > /sys/bus/pci/devices/0000:00:1c.0/rescan 4. Load nouveau driver 5. Start X I worked through the rescan codepath until I had isolated the specific code which magically makes things work (in pci_bridge_check_ranges). Having found that, step 3 in the above test procedure can be replaced with a simple: setpci -s 00:1c.0 0x28.l=0 > When you say "parent PCI" bridge, is that actually the device you see in > "lspci -tv"? On a Dell XPS 9560, the GPU is under a different device: > > -[0000:00]-+-00.0 Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers > +-01.0-[01]----00.0 NVIDIA Corporation GP107M [GeForce GTX 1050 Mobile] > > 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) [8086:1901] (rev 05) Yes, it's the parent bridge shown by lspci. The address of this varies from system to system. >> 1. Is the Intel PCI bridge misbehaving here? Why does writing the same >> value of PCI_PREF_BASE_UPPER32 make any difference at all? > > At what point in the suspend code path did you insert this write? It is > possible that the write somehow acted as a fence/memory barrier? static void quirk_pref_base_upper32(struct pci_dev *dev) { u32 pref_base_upper32; pci_read_config_dword(dev, PCI_PREF_BASE_UPPER32, &pref_base_upper32); pci_write_config_dword(dev, PCI_PREF_BASE_UPPER32, pref_base_upper32); } DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x9d10, quirk_pref_base_upper32); I don't think it's acting as a barrier. I tried changing this code to rewrite other registers such as PCI_PREF_MEMORY_BASE and that makes the bug come back. >> 2. Who is responsible for saving and restoring PCI bridge >> configuration during suspend and resume? Linux? ACPI? BIOS? > > Not sure about PCI bridges, but at least for the PCI Express Capability > registers, it is in control of the OS when control is granted via the > ACPI _OSC method. I guess you are referring to pci_save_pcie_state(). I can't see anything equivalent for the bridge registers. > As Windows is probably not affected by this issue, a change must be > possible to make Linux more compatible with Windows. Though I am not > sure what change is needed. I agree. There's a definite difference with Windows here and it would be great to find a fix along those lines. > I recently compared PCI configuration space access and ACPI method > invocation using QEMU + VFIO with Linux 4.18, Windows 7 and Windows 10 > (1803). There were differences like disabling MSI/interrupts before > suspend, setting the Enable Clock Power Management bit in PCI Express > Link Control and more, but applying these changes were so far not really > successful. Interesting. Do you know any way that I could spy on Windows' accesses to the PCI bridge registers? Looking at at https://wiki.archlinux.org/index.php/PCI_passthrough_via_OVMF I suspect VFIO would not help me here. It says: Note: If they are grouped with other devices in this manner, pci root ports and bridges should neither be bound to vfio at boot, nor be added to the VM. Thanks Daniel _______________________________________________ Nouveau mailing list Nouveau@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/nouveau
