Re: ARM Linux: Where the SDRAM address and size defined

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Mar 07, 2016 at 01:25:25PM +0800, Woody Wu wrote:
> Hi,

Hello,

> In Samsung s3c24xx arch code, I cannot find where the SDRAM address and
> size information was defined. Can someone give me a lead? Thanks.

ARM boards, are now defined using Device Tree (DTS for source, DTB for binary, the compiled form).
I couldn't find out for s3c24xx but, the block memory is defined as follow:

        memory {
                reg = <0x20000000 0x20000000>;
        };

(source: arch/arm/boot/dts/sama5dxcm.dtsi)

>
> -woody

--
François


_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@xxxxxxxxxxxxxxxxx
http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies




[Index of Archives]     [Newbies FAQ]     [Linux Kernel Mentors]     [Linux Kernel Development]     [IETF Annouce]     [Git]     [Networking]     [Security]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux SCSI]     [Linux ACPI]
  Powered by Linux