On Sun, Jul 26, 2015 at 5:02 PM, AYAN KUMAR HALDER <ayankumarh@xxxxxxxxx> wrote:
Hi,
I am doing a DMA transfer (to device) using pl330 driver from
memory(DDR) to device(m25p80, spi- nor). I am sending data in chunks
of 256 bytes ( m25p80 - writesize) using scatter-gather mechanism.
I see that when I try to write 8K of data, one or the other 256
bytes(or lesser) are not written or are partially written with 0s.
This problem is observed only when I perform a to-device DMA transfer.
When I perform a from-device DMA transfer, I am able to read correct
data.
There could be multiple issues like
- In buffers allocations, is the buffer used for to-device DMA is physically contiguous?
- Caching issue, buffer should be un-cacheable.
- Any other programming error.
- Chetan Nanda
Regards,
Ayan Kumar Halder
_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@xxxxxxxxxxxxxxxxx
http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
_______________________________________________ Kernelnewbies mailing list Kernelnewbies@xxxxxxxxxxxxxxxxx http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
