Hello Carlo,
On 15-05-26 16:26:45, Carlo Caione wrote:
> On Mon, May 25, 2015 at 11:02 AM, <victorascroft@xxxxxxxxx> wrote:
> > Hello,
> >
> > I have a query related to device tree. If I have three nodes as below
> >
> > node1: node1@addr1 {
> > compatible ="name1", "syscon";
> > }
> >
> > node2: node1@addr2 {
> > compatible ="name2", "syscon";
> > }
> >
> > node3: node1@addr3 {
> > compatible ="name3", "syscon";
> > }
> >
> >
> > At the top soc node, I define phandles as follows
> >
> > node-phandle1 = <&node1 0x10>
> > node-phandle2 = <&node2 0x20>
> > node-phandle3 = <&node3 0x30>
> >
> > How can I read the values of 0x10, 0x20 and 0x30 while using the node-phandlex
> > property? Is it possible using one of the of_* functions?
> >
> > The driver binds to one of the syscon nodes above lets say node3.
>
> http://lxr.free-electrons.com/source/drivers/of/base.c#L1597
Thanks. This worked out. Is it also possible to read a clock reference for
enabling a clock?
node1 : node@addr1 {
compatible = "name1";
node2-phandle = <&node2>;
}
node2 : node@addr2 {
compatible = "name2";
clocks = <&clks DEVICE_CLK_PER>;
}
In the driver of node 1 I can get node2 and map it. Would it be possible
to get the clock reference for enabling the clock. Basically node2 does
not have the driver and node 1 would require access to node 2 peripheral.
Regards,
Victor.
_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@xxxxxxxxxxxxxxxxx
http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
